component
TPS389001DSET
Public Made by Adomby adom
Texas Instruments Supervisor And Reset ICs, WSON-6(1.5x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS389001DSET
Texas Instruments · Supervisor And Reset ICs · WSON-6(1.5x1.5)
TPS389001DSET from Texas Instruments, in a WSON-6(1.5x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SENSE | input | Monitored voltage input; RESET asserts when voltage falls below VITN and deasserts when voltage rises above VITP. |
| 2 | GND | power_in | Ground reference. |
| 3 | MR | input | Manual reset input; assert RESET by driving MR to logic low. |
| 4 | VDD | power_in | Supply voltage input (1.5 V to 5.5 V); place 0.1-µF ceramic capacitor close to this pin. |
| 5 | CT | passive | Capacitor timing pin; connect ground-referenced capacitor to set RESET delay time per tPD(r) = CCT (µF) × 1.07 + 25 µs. |
| 6 | RESET | tri_state | Open-drain output that asserts low when MR is low or SENSE is below VITN; requires 10 kΩ to 1 MΩ pullup resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6(1.5x1.5) |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TPS389001DSET - Footprint:
Package_SON:WSON-6_1.5x1.5mm_P0.5mm - 3D model: WSON-6(1.5x1.5) (KiCad packages3D, STEP)
- 3D model files:
tps389001dset-etched.step/tps389001dset-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps389001dset.step/tps389001dset.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
2e4edd01aa5645e5, retrieved 2026-10-06, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).