TPS389001DSER

@@ -0,0 +1,30 @@+# License scope++Original Adom-authored reference artwork, supporting code and independent library+content in this repository are licensed under MIT below. Manufacturer STEP files,+datasheets and third-party/upstream library material retain their original terms+and attribution. Derived material subject to an upstream license remains subject+to that license. This notice does not grant rights to relicense manufacturer assets.+See each artifact's provenance for its origin and transformations.++## MIT License++Copyright (c) 2026 Adom++Permission is hereby granted, free of charge, to any person obtaining a copy+of this software and associated documentation files (the "Software"), to deal+in the Software without restriction, including without limitation the rights+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell+copies of the Software, and to permit persons to whom the Software is+furnished to do so, subject to the following conditions:++The above copyright notice and this permission notice shall be included in all+copies or substantial portions of the Software.++THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE+SOFTWARE.

@@ -15,7 +15,7 @@ Texas Instruments adjustable 1.15 V supervisor in DSE0006A WSON-6. This page pre | 1 | SENSE | Threshold input | | 2 | GND | Power return | | 3 | MR, active low | Manual-reset input |-| 4 | VDD | Supply input, recommended 1.5–5.5 V |+| 4 | VDD | Supply input, recommended 1.5–5.5 V | | 5 | CT | Timing-capacitor terminal; modeled passive | | 6 | RESET, active low | Open-drain output; modeled open collector | @@ -23,15 +23,15 @@ The adom-symbol source groups Monitor, Control, Reset and Supply. Connection end  ## Footprint and export status -`TPS389001DSER.kicad_mod` transcribes the manufacturer's example board/stencil drawings, PDF pages 25–26. The solderable/paste rectangles are 0.8 × 0.25 mm for pad 1 and 0.7 × 0.25 mm for the other pads. Pad 1 extends farther inward and shares the row's outer edge. Pads 1–3 use solder-mask-defined lands with 0.05 mm copper overlap; pads 4–6 use non-solder-mask-defined lands with 0.05 mm mask expansion. `land-pattern-intent.json` records exact copper, mask and paste dimensions. The package has six terminals and no separate exposed pad. Silk includes an external pad-1 cue; the fab outline includes a corner cue.+`TPS389001DSER.kicad_mod` transcribes the manufacturer's example board/stencil drawings, PDF pages 25–26. The solderable/paste rectangles are 0.8 × 0.25 mm for pad 1 and 0.7 × 0.25 mm for the other pads. Pad 1 extends farther inward and shares the row's outer edge. Pads 1–3 use solder-mask-defined lands with 0.05 mm copper overlap; pads 4–6 use non-solder-mask-defined lands with 0.05 mm mask expansion. `land-pattern-intent.json` records exact copper, mask and paste dimensions. The package has six terminals and no separate exposed pad. Silk includes an external pad-1 cue; the fab outline includes a corner cue.  **The canonical conversion remains a design candidate.** Installed adom-lbr 2.39.0 drops all per-pad mask and paste margins. Isolated development commit `19e46a6` preserves those fields, footprint defaults and explicit layer participation through KiCad, and adds signed Altium expansion fields with codec tests. The current supervisor Altium export refuses its unrepresentable rounded-corner value; Fusion explicit aperture export returns an unsupported-feature error. Native desktop parity is still unproven. See [adom-lbr issue 25](https://wiki.adom.inc/adom/adom-lbr/issues/25) and `aperture-roundtrip-audit.json`. The original roundtrip-diagnostic copies lost the attributes and must not be used for fabrication. The newer `aperture-candidate/` files preserve them; all remain unqualified. A footprint preview's copper shape alone cannot prove aperture fidelity. InstaPCB mask registration, paste-jet suitability and independent land-pattern review remain open. -The STEP's thin axis is Y: OCCT bounds X ±0.75 mm, Y −0.025..0.775 mm, Z ±0.75 mm. PCB rotation, standoff and pin-1 registration are unverified, so the footprint intentionally has no model reference yet. This is a package-model view, not a seated-board preview. Native KiCad/Fusion/Altium parity remains pending.+The STEP's thin axis is Y: OCCT bounds X ±0.75 mm, Y −0.025..0.775 mm, Z ±0.75 mm. PCB rotation, standoff and pin-1 registration are unverified, so the footprint intentionally has no model reference yet. This is a package-model view, not a seated-board preview. Native KiCad/Fusion/Altium parity remains pending.  ## Circuit and sourcing notes -VDD requires local 0.1 µF decoupling. MR logic thresholds track VDD; a 3.3 V host must not directly assert an assumed valid high when this device is powered from 5 V. RESET needs a pull-up. Select the timing capacitor using the manufacturer datasheet equation and its units, then budget timing and startup limits for the application.+VDD requires local 0.1 µF decoupling. MR logic thresholds track VDD; a 3.3 V host must not directly assert an assumed valid high when this device is powered from 5 V. RESET needs a pull-up. Select the timing capacitor using the manufacturer datasheet equation and its units, then budget timing and startup limits for the application.  Parts Search snapshot, 9 September 2026: exact Mouser `595-TPS389001DSER` reports 2190 units at $1.92 each, with a 112-day lead-time field. Packaging/fulfillment are unconfirmed, and no order or reservation was made. The banner instead recommended DSET; [Parts Search issue 8](https://wiki.adom.inc/adom/adom-parts-search/issues/8) records that mismatch. DSER is the exact orderable documented on this page. Distributor snapshots are dated evidence, not current availability or a stock reservation; query inventory for the intended build. @@ -43,7 +43,7 @@ Parts Search snapshot, 9 September 2026: exact Mouser `595-TPS389001DSER` report  ## Independent-opening candidate -The newer `explicit-aperture-candidate/` retains six named copper terminals and carries twelve unnumbered technical-layer pads for independent mask and paste openings. This prevents KiCad from scaling the opening corner radius with the copper-pad ratio. [Inspect the newer native geometry](https://wiki.adom.inc/adom/tps389001dser/render/explicit-aperture-candidate/aperture-inspection.html). All twelve native opening sizes and R0.05 mm radii match the saved intent within the SVG's coordinate precision. The six electrical connections remain 1→1 through 6→6. Earlier files and the failing corner example are preserved separately.+The newer `explicit-aperture-candidate/` retains six named copper terminals and carries twelve unnumbered technical-layer pads for independent mask and paste openings. This prevents KiCad from scaling the opening corner radius with the copper-pad ratio. [Inspect the newer native geometry](https://wiki.adom.inc/adom/tps389001dser/render/explicit-aperture-candidate/aperture-inspection.html). All twelve native opening sizes and R0.05 mm radii match the saved intent within the SVG's coordinate precision. The six electrical connections remain 1→1 through 6→6. Earlier files and the failing corner example are preserved separately.  The dedicated 5 mm coupon's native DRC reports two copper clearance findings (0.15 mm actual vs default 0.20 mm) and a reference-text edge clipping warning. The detailed native report is authoritative; the service CLI incorrectly summarized zero findings. The InstaPCB skill specifies 0.10 mm minimum spacing, but this coupon did not carry a complete InstaPCB project rule set. This is therefore geometry evidence, not a passing manufacturing DRC. Default ignored checks, including footprint-type mismatch, remain recorded in the native report. Independent copper-land review, native target adapters, model seating and full board qualification remain open. @@ -64,3 +64,10 @@ The displayed `TPS389001DSER.adom-reference-v2.glb` adds teal dashed copper-pad ## Virtual MPN marking  The top-surface TPS389001DSER marking was generated by `adom-chip-laser` in the separate `TPS389001DSER.adom-etched.step` derivative. It is an identification aid, not a representation of the factory's actual marking. The annotated GLB preserves the manufacturer's original body, terminal geometry and materials, and imports only the generated light-gray inlay with a documented 0.006 mm display offset to prevent occlusion by the unchanged top surface. `TPS389001DSER.adom-marked-display.json` records this composition. The etched STEP contains the service's derived bodies/materials; the original `DSE0006A.stp` remains the authoritative manufacturer download. Native seating and manufacturing qualification remain pending.+++## MPN marking, source and license++**Mark location:** Clear top face of the supervisor housing; existing reviewed MPN inlay retained. The exact MPN is a virtual identification inlay generated by `adom-chip-laser`, not a claim about the manufacturer’s actual package marking. The physical source model and reference-artwork geometry remain unchanged.++The Source field links to the manufacturer/reference authority. Generation tools such as adom-lbr, adom-symbol, step2glb and Adom Chip Laser are recorded separately in artifact provenance. Original Adom-authored content defaults to the MIT open-source license; manufacturer and upstream assets retain their original terms and attribution. See [license scope](LICENSE-Adom.md). Native CAD parity and manufacturing qualification are separate checks.

@@ -26,12 +26,14 @@     }   },   "source": {-    "tool": "adom-symbol",+    "tool": "manufacturer",+    "label": "Texas Instruments",     "url": "https://www.ti.com/lit/ds/symlink/tps3890.pdf"   },   "hero": {     "type": "billboard",     "headline": "TPS389001DSER",     "subhead": "Adjustable reset supervisor; manufacturer assets and source library"-  }+  },+  "license": "MIT" }