component
TPS386000RGPR
Public Made by Adomby adom
Texas Instruments Supervisor And Reset ICs, QFN-20-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+58@@ -0,0 +1,58 @@+# TPS386000RGPR++**Texas Instruments** · Supervisor And Reset ICs · QFN-20-EP(4x4)++TPS386000RGPR from Texas Instruments, in a QFN-20-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | MR | input | Manual reset input for SVS-1; logic low asserts RESET1. |+| 2 | CT4 | passive | Reset delay programming pin for SVS-4; connect to VDD through 40kΩ-200kΩ resistor for fixed 300ms delay, leave open for 20ms delay, or connect capacitor >220pF to GND for programmable delay. |+| 3 | CT3 | passive | Reset delay programming pin for SVS-3; connect to VDD through 40kΩ-200kΩ resistor for fixed 300ms delay, leave open for 20ms delay, or connect capacitor >220pF to GND for programmable delay. |+| 4 | CT2 | passive | Reset delay programming pin for SVS-2; connect to VDD through 40kΩ-200kΩ resistor for fixed 300ms delay, leave open for 20ms delay, or connect capacitor >220pF to GND for programmable delay. |+| 5 | CT1 | passive | Reset delay programming pin for SVS-1; connect to VDD through 40kΩ-200kΩ resistor for fixed 300ms delay, leave open for 20ms delay, or connect capacitor >220pF to GND for programmable delay. |+| 6 | SENSE4H | input | Rising (overvoltage) monitor voltage input for SVS-4 window comparator; when voltage exceeds VITP (400mV typical), RESET4 asserts, can also monitor negative voltage rail in combination with VREF. |+| 7 | SENSE4L | input | Falling (undervoltage) monitor voltage input for SVS-4 window comparator; when voltage drops below VITN (400mV typical), RESET4 asserts. |+| 8 | SENSE3 | input | Monitor voltage input for SVS-3; when voltage drops below VITN (400mV typical), RESET3 asserts. |+| 9 | SENSE2 | input | Monitor voltage input for SVS-2; when voltage drops below VITN (400mV typical), RESET2 asserts. |+| 10 | SENSE1 | input | Monitor voltage input for SVS-1; when voltage drops below VITN (400mV typical), RESET1 asserts. |+| 11 | NC | unconnected | Not internally connected; TI recommends connecting this pin to GND (pin 12). |+| 12 | GND | power_in | Ground reference. |+| 13 | VREF | power_in | Reference voltage output, 1.18V to 1.22V nominal; sources current only into resistor networks for negative voltage monitoring via SENSE4H. |+| 14 | VDD | power_in | Supply voltage input, 1.8V to 6.5V operating range; place 0.1μF ceramic bypass capacitor close to this pin. |+| 15 | RESET1 | tri_state | Active-low reset output for SVS-1; open-drain output asserted when MR is low or SENSE1 drops below VITN, requires pullup resistor to valid logic voltage. |+| 16 | RESET2 | tri_state | Active-low reset output for SVS-2; open-drain output asserted when SENSE2 drops below VITN, requires pullup resistor to valid logic voltage. |+| 17 | RESET3 | tri_state | Active-low reset output for SVS-3; open-drain output asserted when SENSE3 drops below VITN, requires pullup resistor to valid logic voltage. |+| 18 | RESET4 | tri_state | Active-low reset output for SVS-4; open-drain output asserted when SVS-4 window comparator detects fault condition, requires pullup resistor to valid logic voltage. |+| 19 | WDO | tri_state | Watchdog timer open-drain output; asserts (goes low) when watchdog timer times out after 450-750ms without WDI transition, requires pullup resistor. |+| 20 | WDI | input | Watchdog timer trigger input; positive or negative logic level transition resets internal timer countdown, must occur within 610ms (typical) to prevent WDT timeout. |+| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | QFN-20-EP(4x4) |+| Category | Power Management (PMIC) |+| Pins | 21 |++## CAD (KiCad official)++- Symbol: `TPS386000RGPR`+- Footprint: `Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm`+- 3D model: QFN-20-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `tps386000rgpr-etched.step` / `tps386000rgpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps386000rgpr.step` / `tps386000rgpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps386040) (41 pp, sha256 `5b9d2375847111b6`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps386000rgpr-datasheet.pdf)
page.jsonadded+222@@ -0,0 +1,222 @@+{+ "slug": "tps386000rgpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Supervisor And Reset ICs, QFN-20-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps386000rgpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps386000rgpr.kicad_sym",+ "tps386000rgpr.kicad_mod",+ "tps386000rgpr.glb",+ "tps386000rgpr.step",+ "tps386000rgpr.lbr",+ "docs/hero.png",+ "docs/tps386000rgpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS386000RGPR",+ "manufacturer": "Texas Instruments",+ "package": "QFN-20-EP(4x4)",+ "pin_count": 21,+ "category": "Power Management (PMIC)",+ "subcategory": "Supervisor And Reset ICs",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps386040",+ "parts": {+ "symbol": "tps386000rgpr.kicad_sym",+ "footprint": "tps386000rgpr.kicad_mod",+ "model_3d": "tps386000rgpr-etched.glb",+ "model_3d_plain": "tps386000rgpr.glb",+ "model_3d_step": "tps386000rgpr-etched.step",+ "model_3d_step_plain": "tps386000rgpr.step",+ "lbr": "tps386000rgpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C702221"+ },+ "pins": [+ {+ "number": "1",+ "name": "MR",+ "type": "input",+ "description": "Manual reset input for SVS-1; logic low asserts RESET1."+ },+ {+ "number": "2",+ "name": "CT4",+ "type": "passive",+ "description": "Reset delay programming pin for SVS-4; connect to VDD through 40kΩ-200kΩ resistor for fixed 300ms delay, leave open for 20ms delay, or connect capacitor >220pF to GND for programmable delay."+ },+ {+ "number": "3",+ "name": "CT3",+ "type": "passive",+ "description": "Reset delay programming pin for SVS-3; connect to VDD through 40kΩ-200kΩ resistor for fixed 300ms delay, leave open for 20ms delay, or connect capacitor >220pF to GND for programmable delay."+ },+ {+ "number": "4",+ "name": "CT2",+ "type": "passive",+ "description": "Reset delay programming pin for SVS-2; connect to VDD through 40kΩ-200kΩ resistor for fixed 300ms delay, leave open for 20ms delay, or connect capacitor >220pF to GND for programmable delay."+ },+ {+ "number": "5",+ "name": "CT1",+ "type": "passive",+ "description": "Reset delay programming pin for SVS-1; connect to VDD through 40kΩ-200kΩ resistor for fixed 300ms delay, leave open for 20ms delay, or connect capacitor >220pF to GND for programmable delay."+ },+ {+ "number": "6",+ "name": "SENSE4H",+ "type": "input",+ "description": "Rising (overvoltage) monitor voltage input for SVS-4 window comparator; when voltage exceeds VITP (400mV typical), RESET4 asserts, can also monitor negative voltage rail in combination with VREF."+ },+ {+ "number": "7",+ "name": "SENSE4L",+ "type": "input",+ "description": "Falling (undervoltage) monitor voltage input for SVS-4 window comparator; when voltage drops below VITN (400mV typical), RESET4 asserts."+ },+ {+ "number": "8",+ "name": "SENSE3",+ "type": "input",+ "description": "Monitor voltage input for SVS-3; when voltage drops below VITN (400mV typical), RESET3 asserts."+ },+ {+ "number": "9",+ "name": "SENSE2",+ "type": "input",+ "description": "Monitor voltage input for SVS-2; when voltage drops below VITN (400mV typical), RESET2 asserts."+ },+ {+ "number": "10",+ "name": "SENSE1",+ "type": "input",+ "description": "Monitor voltage input for SVS-1; when voltage drops below VITN (400mV typical), RESET1 asserts."+ },+ {+ "number": "11",+ "name": "NC",+ "type": "unconnected",+ "description": "Not internally connected; TI recommends connecting this pin to GND (pin 12)."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference."+ },+ {+ "number": "13",+ "name": "VREF",+ "type": "power_in",+ "description": "Reference voltage output, 1.18V to 1.22V nominal; sources current only into resistor networks for negative voltage monitoring via SENSE4H."+ },+ {+ "number": "14",+ "name": "VDD",+ "type": "power_in",+ "description": "Supply voltage input, 1.8V to 6.5V operating range; place 0.1μF ceramic bypass capacitor close to this pin."+ },+ {+ "number": "15",+ "name": "RESET1",+ "type": "tri_state",+ "description": "Active-low reset output for SVS-1; open-drain output asserted when MR is low or SENSE1 drops below VITN, requires pullup resistor to valid logic voltage."+ },+ {+ "number": "16",+ "name": "RESET2",+ "type": "tri_state",+ "description": "Active-low reset output for SVS-2; open-drain output asserted when SENSE2 drops below VITN, requires pullup resistor to valid logic voltage."+ },+ {+ "number": "17",+ "name": "RESET3",+ "type": "tri_state",+ "description": "Active-low reset output for SVS-3; open-drain output asserted when SENSE3 drops below VITN, requires pullup resistor to valid logic voltage."+ },+ {+ "number": "18",+ "name": "RESET4",+ "type": "tri_state",+ "description": "Active-low reset output for SVS-4; open-drain output asserted when SVS-4 window comparator detects fault condition, requires pullup resistor to valid logic voltage."+ },+ {+ "number": "19",+ "name": "WDO",+ "type": "tri_state",+ "description": "Watchdog timer open-drain output; asserts (goes low) when watchdog timer times out after 450-750ms without WDI transition, requires pullup resistor."+ },+ {+ "number": "20",+ "name": "WDI",+ "type": "input",+ "description": "Watchdog timer trigger input; positive or negative logic level transition resets internal timer countdown, must occur within 610ms (typical) to prevent WDT timeout."+ },+ {+ "number": "21",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 21 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 41,+ "cost_usd": 0.4105,+ "at": "2026-09-23T01:41:10"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps386040",+ "pages": 41,+ "sha256": "5b9d2375847111b6",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 21,+ "described": 21,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}