# TPS3847085DBVR

**Texas Instruments** · Supervisor And Reset ICs · SOT-23-5

TPS3847085DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low push-pull reset output that stays low while VCC is below the factory-trimmed threshold and goes high after the reset delay time td once VCC rises above the positive-going threshold. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | NC | unconnected | No internal connection. |
| 4 | MR | input | Manual reset input: a logic low forces RESET low regardless of VCC, VIL is 0.4 V maximum and VIH is 1.2 V minimum, and the pin must not be left floating (tie to VCC if unused). |
| 5 | VCC | power_in | Power supply and monitored voltage, specified from 4.5 V to 18 V, with a 0.1-µF bypass capacitor recommended near the pin. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |

## CAD (KiCad official)

- Symbol: `TPS3847085DBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `tps3847085dbvr-etched.step` / `tps3847085dbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps3847085dbvr.step` / `tps3847085dbvr.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps3847) (24 pp, sha256 `d3018940359fdeb4`, retrieved 2026-10-08, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/tps3847085dbvr-datasheet.pdf)