main
Ray
Publish 0.1.0
5850207
TPS3840PL31DBVRQ1
Texas Instruments · Monitors & Reset Circuits · SOT-23-5
TPS3840PL31DBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low push-pull reset output that is driven low when MR is pulled low or VDD falls below the negative threshold VIT-, and stays asserted for the delay time tD after MR is floating or above VMR_L and VDD rises above VIT+. |
| 2 | VDD | power_in | Input supply voltage that the device monitors; the recommended VDD range is 1.5 V to 10 V. |
| 3 | GND | power_in | Ground reference pin. |
| 4 | MR / NC | input | Manual reset input that asserts a reset when pulled to a logic low (VMR_L); it may be left floating when not in use and should not be driven above VDD. |
| 5 | CT | passive | Capacitor time-delay pin, where an external capacitor to GND sets the reset delay tD (from 50 µs with no capacitor up to 6.2 s with 10 µF); leave floating for the smallest fixed delay. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage (absolute maximum) | VDD | -0.3 | 12 | V | 5 | ||
| RESET (TPS3840PL) pin voltage | -0.3 | V | Max printed as VDD + 0.3 | 5 | |||
| MR pin voltage | -0.3 | 12 | V | 5 | |||
| CT pin voltage | -0.3 | 5.5 | V | 5 | |||
| RESET pin and RESET pin current | -70 | 70 | mA | 5 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Input supply voltage | VDD | 1.5 | 10 | V | 5 | ||
| RESET pin and RESET pin voltage | VRESET, VRESET | 0 | 10 | V | 5 | ||
| RESET pin and RESET pin current | IRESET, IRESET | 0 | 5 | mA | 5 | ||
| Junction temperature (free air temperature) | TJ | -40 | 125 | °C | 5 | ||
| Manual reset pin voltage | VMR | 0 | V | Max printed as VDD | 5 | ||
| Negative-going input threshold accuracy | VIT- | -1.5 | 1 | 1.5 | % | -40°C to 125°C | 6 |
| Hysteresis on VIT- pin | VHYS | 175 | 200 | 225 | mV | VIT- = 3.1 V to 4.9 V | 6 |
| Supply current into VDD pin | IDD | 300 | 700 | nA | VDD = 1.5 V < VDD < 10 V; VDD > VIT+; TA = -40°C to 125°C | 6 | |
| Manual reset logic low input | VMR_L | 600 | mV | 6 | |||
| CT pin internal resistance | RCT | 350 | 500 | 650 | kΩ | 6 | |
| Power on reset voltage (TPS3840PL) | VPOR | 300 | mV | VOL(max) = 200 mV; IOUT(Sink) = 200 nA | 6 | ||
| Low level output voltage (TPS3840PL push-pull) | VOL | 200 | mV | 1.5 V < VDD < 5 V; VDD < VIT-; IOUT(Sink) = 2 mA | 6 | ||
| Startup delay | tSTRT | 100 | 220 | 350 | µs | CT pin open | 7 |
| Propagation detect delay for VDD falling below VIT- | tP_HL | 15 | 30 | µs | VDD = VIT+ to (VIT-) - 10% | 7 | |
| Reset time delay | tD | 50 | µs | CT pin = open | 7 | ||
| Junction-to-ambient thermal resistance | RθJA | 187.5 | °C/W | DBV (SOT23-5) | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 109.2 | °C/W | DBV (SOT23-5) | 5 | ||
| Junction-to-board thermal resistance | RθJB | 92.8 | °C/W | DBV (SOT23-5) | 5 | ||
| Junction-to-top characterization parameter | ψJT | 35.4 | °C/W | DBV (SOT23-5) | 5 | ||
| Junction-to-board characterization parameter | ψJB | 92.5 | °C/W | DBV (SOT23-5) | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TPS3840PL31DBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps3840pl31dbvrq1-etched.step/tps3840pl31dbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps3840pl31dbvrq1.step/tps3840pl31dbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
f21896763565f7c3, retrieved 2026-11-13, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# TPS3840PL31DBVRQ1
**Texas Instruments** · Monitors & Reset Circuits · SOT-23-5
TPS3840PL31DBVRQ1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low push-pull reset output that is driven low when MR is pulled low or VDD falls below the negative threshold VIT-, and stays asserted for the delay time tD after MR is floating or above VMR_L and VDD rises above VIT+. |
| 2 | VDD | power_in | Input supply voltage that the device monitors; the recommended VDD range is 1.5 V to 10 V. |
| 3 | GND | power_in | Ground reference pin. |
| 4 | MR / NC | input | Manual reset input that asserts a reset when pulled to a logic low (VMR_L); it may be left floating when not in use and should not be driven above VDD. |
| 5 | CT | passive | Capacitor time-delay pin, where an external capacitor to GND sets the reset delay tD (from 50 µs with no capacitor up to 6.2 s with 10 µF); leave floating for the smallest fixed delay. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage (absolute maximum) | VDD | -0.3 | | 12 | V | | 5 |
| RESET (TPS3840PL) pin voltage | | -0.3 | | | V | Max printed as VDD + 0.3 | 5 |
| MR pin voltage | | -0.3 | | 12 | V | | 5 |
| CT pin voltage | | -0.3 | | 5.5 | V | | 5 |
| RESET pin and RESET pin current | | -70 | | 70 | mA | | 5 |
| Operating junction temperature | TJ | -40 | | 150 | °C | | 5 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 5 |
| Input supply voltage | VDD | 1.5 | | 10 | V | | 5 |
| RESET pin and RESET pin voltage | VRESET, VRESET | 0 | | 10 | V | | 5 |
| RESET pin and RESET pin current | IRESET, IRESET | 0 | | 5 | mA | | 5 |
| Junction temperature (free air temperature) | TJ | -40 | | 125 | °C | | 5 |
| Manual reset pin voltage | VMR | 0 | | | V | Max printed as VDD | 5 |
| Negative-going input threshold accuracy | VIT- | -1.5 | 1 | 1.5 | % | -40°C to 125°C | 6 |
| Hysteresis on VIT- pin | VHYS | 175 | 200 | 225 | mV | VIT- = 3.1 V to 4.9 V | 6 |
| Supply current into VDD pin | IDD | 300 | | 700 | nA | VDD = 1.5 V < VDD < 10 V; VDD > VIT+; TA = -40°C to 125°C | 6 |
| Manual reset logic low input | VMR_L | | | 600 | mV | | 6 |
| CT pin internal resistance | RCT | 350 | 500 | 650 | kΩ | | 6 |
| Power on reset voltage (TPS3840PL) | VPOR | | | 300 | mV | VOL(max) = 200 mV; IOUT(Sink) = 200 nA | 6 |
| Low level output voltage (TPS3840PL push-pull) | VOL | | | 200 | mV | 1.5 V < VDD < 5 V; VDD < VIT-; IOUT(Sink) = 2 mA | 6 |
| Startup delay | tSTRT | 100 | 220 | 350 | µs | CT pin open | 7 |
| Propagation detect delay for VDD falling below VIT- | tP_HL | 15 | 30 | | µs | VDD = VIT+ to (VIT-) - 10% | 7 |
| Reset time delay | tD | 50 | | | µs | CT pin = open | 7 |
| Junction-to-ambient thermal resistance | RθJA | | 187.5 | | °C/W | DBV (SOT23-5) | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 109.2 | | °C/W | DBV (SOT23-5) | 5 |
| Junction-to-board thermal resistance | RθJB | | 92.8 | | °C/W | DBV (SOT23-5) | 5 |
| Junction-to-top characterization parameter | ψJT | | 35.4 | | °C/W | DBV (SOT23-5) | 5 |
| Junction-to-board characterization parameter | ψJB | | 92.5 | | °C/W | DBV (SOT23-5) | 5 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `TPS3840PL31DBVRQ1`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tps3840pl31dbvrq1-etched.step` / `tps3840pl31dbvrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps3840pl31dbvrq1.step` / `tps3840pl31dbvrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps3840pl31dbvrq1.pdf) (38 pp, sha256 `f21896763565f7c3`, retrieved 2026-11-13, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/tps3840pl31dbvrq1-datasheet.pdf)