component
TPS3840PL28DBVR
Public Made by Adomby adom
Texas Instruments Supervisor And Reset ICs, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS3840PL28DBVR
Texas Instruments · Supervisor And Reset ICs · SOT-23-5
TPS3840PL28DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low reset output for the TPS3840PL: driven low when MR is pulled to logic low or VDD falls below the negative threshold VIT-, and held low for the reset delay tD after release before returning high. |
| 2 | VDD | power_in | Input supply voltage, monitored by the device; the recommended operating range is 1.5 V to 10 V, with an absolute maximum of 12 V. |
| 3 | GND | power_in | Ground reference pin for the device. |
| 4 | MR | input | Manual reset input: pulling it below VMR_L (600 mV max) asserts reset, and it can be left floating or pulled to VMR_H (0.7 VDD min) for normal operation, but VMR must never exceed VDD. |
| 5 | CT | passive | Reset delay programming pin: a capacitor from CT to GND sets tD (up to 10 µF is recommended), and leaving CT floating gives the minimum fixed delay of 50 µs. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TPS3840PL28DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tps3840pl28dbvr-etched.step/tps3840pl28dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps3840pl28dbvr.step/tps3840pl28dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
0e64fce6bd716dc3, retrieved 2026-10-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).