main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tps3839k50dbzr: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tps3839k50dbzr-etched.glb tps3839k50dbzr: factory component page (tier=mfr) · Ray
tps3839k50dbzr-etched.step tps3839k50dbzr: factory component page (tier=mfr) · Ray
tps3839k50dbzr-hero.glb tps3839k50dbzr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps3839k50dbzr-hero.overlay.json tps3839k50dbzr: hero GLB from the etched model (keeps the MPN mark) · Ray
tps3839k50dbzr.glb Publish 0.1.0 · Ray
tps3839k50dbzr.kicad_mod Publish 0.1.0 · Ray
tps3839k50dbzr.kicad_sym Publish 0.1.0 · Ray
tps3839k50dbzr.lbr Publish 0.1.0 · Ray
tps3839k50dbzr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 3 pins · Ray

TPS3839K50DBZR

Texas Instruments · Monitors & Reset Circuits · SOT-23-3

TPS3839K50DBZR from Texas Instruments, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 GND power_in Ground reference pin for the device.
2 RESET output Active-low reset output with push-pull drive that can directly drive input pins; it stays low while VDD is below the factory threshold voltage and until the delay time (td) elapses after VDD rises above the threshold.
3 VDD power_in Supply voltage input; the device is specified for VDD from 0.9 V to 6.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-3
Category Power Management ICs
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage VDD 0.9 6.5 V 7
Supply current (into VDD pin) IDD 150 500 nA Output not connected 7
Low-level output voltage (RESET pin) VOL 0.4 V VDD = 0.9 V to 1.2 V, IOL = 120 µA 7
Negative-going threshold voltage (TPS3839K50) VIT- 4.271 4.38 4.446 V TA = 25°C (threshold accuracy block heading) 7
Negative-going threshold accuracy VIT- -1 1 % TA = 25°C 7
RESET delay time (power-up delay) td 120 200 350 ms 8
Propagation delay, VDD falling (power-down delay) tPD_VDD 20 µs 8
Propagation delay from MR low to RESET low tPD_MR 46 ns 8
Hysteresis voltage (TPS3839K50) Vhys 44 mV 7
Minimum VDD voltage for valid output V(POR) 0.6 V IOL = 1 µA 7
Input supply voltage (absolute maximum, VDD and RESET) VDD, RESET -0.3 7 V Over operating free-air temperature range 6
RESET pin current -10 10 mA 6
Operating ambient temperature TA -40 85 °C 6
Storage temperature Tstg -65 150 °C 6
Input supply voltage VDD 0.9 6.5 V Over operating free-air temperature range 6
RESET pin voltage VRESET 0 6.5 V 6
RESET pin current IRESET 0 8 mA 6
Junction-to-ambient thermal resistance (DBZ) RθJA 346.6 °C/W DBZ (SOT23-3) package 6
Junction-to-case (top) thermal resistance (DBZ) RθJC(top) 124.4 °C/W DBZ (SOT23-3) package 6
Junction-to-board thermal resistance (DBZ) RθJB 78.9 °C/W DBZ (SOT23-3) package 6
Junction-to-top characterization parameter (DBZ) ψJT 11.5 °C/W DBZ (SOT23-3) package 6
Junction-to-board characterization parameter (DBZ) ψJB 77.3 °C/W DBZ (SOT23-3) package 6

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS3839K50DBZR
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps3839k50dbzr-etched.step / tps3839k50dbzr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps3839k50dbzr.step / tps3839k50dbzr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 a18940237afc63cf, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF