main
Ray Publish 0.1.0 843e4e0

TPS3839E16DBZR

Texas Instruments · Monitors & Reset Circuits · SOT-23

TPS3839E16DBZR from Texas Instruments, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 GND power_in Ground pin; the pin function table lists it as Ground for the TPS3839 SOT23-3 (DBZ) package.
2 RESET output Active-low push-pull reset output that can directly drive input pins; it stays low while VDD is below the factory threshold voltage and until the delay time (td) elapses after VDD rises above the threshold.
3 VDD power_in Supply voltage input; the recommended operating range is 0.9 V to 6.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23
Category Power Supply Chip
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage VDD 0.9 6.5 V 7
Input supply voltage VDD 0.9 6.5 V 6
RESET pin voltage VRESET 0 6.5 V 6
RESET pin current IRESET 0 8 mA 6
Voltage, VDD and RESET VDD, RESET -0.3 7 V 6
Current, RESET pin RESET -10 10 mA 6
Operating ambient temperature TA -40 85 °C 6
Storage temperature Tstg -65 150 °C 6
Minimum VDD voltage for valid output V(POR) 0.6 V IOL = 1 µA 7
Supply current (into VDD pin) IDD 150 500 nA Output not connected 7
Low-level output voltage (RESET pin) VOL 0.4 V VDD = 0.9 V to 1.2 V, IOL = 120 µA 7
Negative-going threshold voltage (TPS383xE16) VIT- 1.482 1.52 1.543 V 7
Hysteresis voltage (TPS383xE16) Vhys 15 mV 7
RESET delay time (power-up delay) td 120 200 350 ms 8
Propagation delay, VDD falling (power-down delay) tPD_VDD 20 µs 8
Junction-to-ambient thermal resistance (DBZ, SOT-23-3) RθJA 346.6 °C/W 6
Junction-to-case (top) thermal resistance (DBZ, SOT-23-3) RθJC(top) 124.4 °C/W 6
Junction-to-board thermal resistance (DBZ, SOT-23-3) RθJB 78.9 °C/W 6
Junction-to-top characterization parameter (DBZ, SOT-23-3) ψJT 11.5 °C/W 6
Junction-to-board characterization parameter (DBZ, SOT-23-3) ψJB 77.3 °C/W 6

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS3839E16DBZR
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.37 mm, terminals on the pads, 1.12 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps3839e16dbzr-etched.step / tps3839e16dbzr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps3839e16dbzr.step / tps3839e16dbzr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 270683e21b6e805f, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF