Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS3813K33QDBVRQ1

Texas Instruments · Monitors & Reset Circuits · SOT-23-6

TPS3813K33QDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 WDI input Watchdog timer input that must be driven at all times and must not be left floating.
2 GND power_in Ground reference pin for the device.
3 WDT input Programmable watchdog delay input that sets the watchdog timeout.
4 VDD power_in Supply voltage and supervised input; the recommended supply range is 2 V to 6 V.
5 WDR input Selectable watchdog window ratio input that must be tied to VDD or GND and must not be left floating.
6 RESET output Open-drain reset output that is asserted low when VDD falls below the threshold VIT.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD supply voltage VDD 7 V All voltage values with respect to GND 5
RESET pin voltage -0.3 V Max printed as VDD + 0.3 V (expression) 5
All other pins voltage -0.3 7 V All voltage values with respect to GND 5
Maximum low output current IOL 5 mA 5
Maximum high output current IOH -5 mA 5
Input clamp current IIK -20 20 mA VI < 0 or VI > VDD 5
Output clamp current IOK -20 20 mA VO < 0 or VO > VDD 5
Operating free-air temperature TA -40 125 °C 5
Storage temperature Tstg -65 150 °C 5
Supply voltage VDD 2 6 V 5
Input voltage VI 0 V Max printed as VDD + 0.3 V (expression) 5
Pulse width of WDI trigger pulse tw 50 ns 5
Input transition rise and fall rate Δt/ΔV 100 ns/V 5
Operating free-air temperature range TA -40 125 °C 5
Low-level output voltage VOL 0.2 V VDD = 2 V to 6 V, IOL = 500 μA 6
Low-level output voltage VOL 0.4 V VDD = 3.3 V, IOL = 2 mA 6
Power up reset voltage 0.2 V VDD ≥ 1.1 V, IOL = 50 μA 6
Negative-going input threshold voltage VIT 2.87 2.93 3 V TPS3813K33-Q1 6
High-level input current (WDI, WDR) IIH -125 125 nA WDI = VDD = 6 V, WDR = VDD = 6 V 6
High-level input current (WDT) IIH -125 125 nA WDT = VDD = 6 V, VDD > VIT, RESET = High 6
Low-level input current (WDI, WDR) IIL -125 125 nA WDI = 0 V, WDR = 0 V, VDD = 6 V 6
Low-level input current (WDT) IIL -125 125 nA WDT = 0 V, VDD > VIT, RESET = High 6
High-level output current IOH 25 nA VDD = VIT + 0.2 V, VOH = VDD 6
Supply current IDD 9 13 μA VDD = 2 V, output unconnected 6
Supply current IDD 20 25 μA VDD = 5 V, output unconnected 6
Delay time td 20 25 30 ms VDD ≥ VIT + 0.2 V 7
Watchdog time-out upper limit tt(out) 0.2 0.25 0.3 s WDT = 0 V 7
Watchdog time-out upper limit tt(out) 2 2.5 3 s WDT = VDD 7
Propagation delay time, high-to-low-level output (VDD to RESET) tPHL 30 50 μs VIL = VIT, 0.2 V, VIH = VIT + 0.2 V 7
Hysteresis VHYS 40 mV TPS3813K33-Q1 6
Input capacitance Ci 5 pF VI = 0 V to VDD 6
Glitch immunity VIT (pulse width at VDD) tGI_VIT 3 µs VDD = VIT + 0.2 V, VDD = VIT, 0.2 V 6
Junction-to-ambient thermal resistance RθJA 202.9 °C/W 6
Junction-to-case (top) thermal resistance RθJC(top) 164.3 °C/W 6
Junction-to-board thermal resistance RθJB 54.6 °C/W 6
Junction-to-top characterization parameter ψJT 44.2 °C/W 6
Junction-to-board characterization parameter ψJB 54 °C/W 6

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS3813K33QDBVRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps3813k33qdbvrq1-etched.step / tps3813k33qdbvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps3813k33qdbvrq1.step / tps3813k33qdbvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (25 pp, sha256 358958089274ca7a, retrieved 2026-11-13, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF