main
Ray
Publish 0.1.0
ffa5131
TPS3808G33MDBVREP
Texas Instruments · Monitors & Reset Circuits · SOT-23-6
TPS3808G33MDBVREP from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | RESET is an open-drain output driven to a low-impedance state when SENSE is below VIT or MR is low, and needs a pullup of 10 kΩ to 1 MΩ, which allows it to go above VDD. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | MR | input | Driving MR low asserts RESET; MR has an internal 90 kΩ pullup to VDD, with VIL of 0.3 VDD and VIH of 0.7 VDD. |
| 4 | CT | input | Reset period programming pin: a 40 kΩ to 200 kΩ resistor to VDD or leaving it open sets a fixed delay (300 ms or 20 ms), and a ground-referenced capacitor of at least 100 pF sets a user-programmable delay from 1.25 ms to 10 s. |
| 5 | SENSE | input | Voltage monitored by the device; RESET is asserted when this voltage drops below the threshold VIT. |
| 6 | VDD | power_in | Supply voltage input with a input supply range of 1.7 V to 6.5 V; a 0.1 µF ceramic capacitor should be placed close to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply current (current into VDD pin), VDD = 3.3 V | IDD | 2.4 | 5 | µA | VDD = 3.3 V, RESET not asserted, MR, RESET, CT open | 5 | |
| Supply current (current into VDD pin), VDD = 6.5 V | IDD | 2.7 | 6 | µA | VDD = 6.5 V, RESET not asserted, MR, RESET, CT open | 5 | |
| Low-level output voltage | VOL | 0.3 | V | 1.3 V ≤ VDD < 1.8 V, IOL = 0.4 mA | 5 | ||
| Low-level output voltage | VOL | 0.4 | V | 1.8 V ≤ VDD ≤ 6.5 V, IOL = 1.0 mA | 5 | ||
| Power-up reset voltage | 0.8 | V | VOL (max) = 0.2 V, IRESET = 15 µA | 5 | |||
| Negative-going input threshold accuracy (VIT ≤ 3.3 V) | VIT | -1.7 | 0.5 | 1.7 | % | VIT ≤ 3.3 V | 5 |
| Hysteresis on VIT pin | VHYS | 1 | 2.5 | % | VIT, fixed versions | 5 | |
| MR internal pullup resistance | RMR | 70 | 90 | kΩ | 5 | ||
| Input current at SENSE pin, fixed versions | ISENSE | 1.7 | µA | VSENSE = 6.5 V, fixed versions | 5 | ||
| RESET leakage current | IOH | 300 | nA | VRESET = 6.5 V, RESET not asserted | 5 | ||
| MR logic low input | VIL | 0 | 0.3 | VDD | 5 | ||
| MR logic high input | VIH | 0.7 | VDD | 5 | |||
| RESET delay time, CT open | td | 12 | 20 | 29 | ms | CT = Open | 5 |
| RESET delay time, CT = VDD | td | 180 | 300 | 440 | ms | CT = VDD | 5 |
| RESET delay time, CT = 100 pF | td | 0.75 | 1.25 | 1.8 | s | CT = 100 pF | 5 |
| RESET delay time, CT = 180 nF | td | 0.7 | 1.2 | 1.8 | s | CT = 180 nF | 5 |
| Propagation delay MR to RESET, high-to-low | tpHL | 150 | ns | VIH = 0.7 VDD, VIL = 0.3 VDD | 5 | ||
| Propagation delay SENSE to RESET, high-to-low | tpHL | 20 | µs | VIH = 1.05 VIT, VIL = 0.95 VIT | 5 | ||
| Input supply range | VDD | 1.7 | 6.5 | V | 4 | ||
| Operating temperature range | TJ | -55 | 125 | °C | Electrical characteristics temperature range | 5 | |
| Input voltage, VDD | VDD | -0.3 | 7 | V | 4 | ||
| CT voltage | VCT | -0.3 | V | Maximum is VDD + 0.3 V | 4 | ||
| Other voltage: VRESET, VMR, VSENSE | VRESET, VMR, VSENSE | -0.3 | 7 | V | 4 | ||
| RESET pin current | 5 | mA | 4 | ||||
| Operating junction temperature | TJ | -55 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 180.9 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 117.8 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 27.8 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 1.12 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 27.3 | °C/W | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TPS3808G33MDBVREP - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps3808g33mdbvrep-etched.step/tps3808g33mdbvrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps3808g33mdbvrep.step/tps3808g33mdbvrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
5e13a0140a97a913, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# TPS3808G33MDBVREP
**Texas Instruments** · Monitors & Reset Circuits · SOT-23-6
TPS3808G33MDBVREP from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | RESET is an open-drain output driven to a low-impedance state when SENSE is below VIT or MR is low, and needs a pullup of 10 kΩ to 1 MΩ, which allows it to go above VDD. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | MR | input | Driving MR low asserts RESET; MR has an internal 90 kΩ pullup to VDD, with VIL of 0.3 VDD and VIH of 0.7 VDD. |
| 4 | CT | input | Reset period programming pin: a 40 kΩ to 200 kΩ resistor to VDD or leaving it open sets a fixed delay (300 ms or 20 ms), and a ground-referenced capacitor of at least 100 pF sets a user-programmable delay from 1.25 ms to 10 s. |
| 5 | SENSE | input | Voltage monitored by the device; RESET is asserted when this voltage drops below the threshold VIT. |
| 6 | VDD | power_in | Supply voltage input with a input supply range of 1.7 V to 6.5 V; a 0.1 µF ceramic capacitor should be placed close to this pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply current (current into VDD pin), VDD = 3.3 V | IDD | | 2.4 | 5 | µA | VDD = 3.3 V, RESET not asserted, MR, RESET, CT open | 5 |
| Supply current (current into VDD pin), VDD = 6.5 V | IDD | | 2.7 | 6 | µA | VDD = 6.5 V, RESET not asserted, MR, RESET, CT open | 5 |
| Low-level output voltage | VOL | | | 0.3 | V | 1.3 V ≤ VDD < 1.8 V, IOL = 0.4 mA | 5 |
| Low-level output voltage | VOL | | | 0.4 | V | 1.8 V ≤ VDD ≤ 6.5 V, IOL = 1.0 mA | 5 |
| Power-up reset voltage | | | | 0.8 | V | VOL (max) = 0.2 V, IRESET = 15 µA | 5 |
| Negative-going input threshold accuracy (VIT ≤ 3.3 V) | VIT | -1.7 | 0.5 | 1.7 | % | VIT ≤ 3.3 V | 5 |
| Hysteresis on VIT pin | VHYS | 1 | | 2.5 | % | VIT, fixed versions | 5 |
| MR internal pullup resistance | RMR | 70 | 90 | | kΩ | | 5 |
| Input current at SENSE pin, fixed versions | ISENSE | | | 1.7 | µA | VSENSE = 6.5 V, fixed versions | 5 |
| RESET leakage current | IOH | | | 300 | nA | VRESET = 6.5 V, RESET not asserted | 5 |
| MR logic low input | VIL | 0 | | 0.3 | VDD | | 5 |
| MR logic high input | VIH | 0.7 | | | VDD | | 5 |
| RESET delay time, CT open | td | 12 | 20 | 29 | ms | CT = Open | 5 |
| RESET delay time, CT = VDD | td | 180 | 300 | 440 | ms | CT = VDD | 5 |
| RESET delay time, CT = 100 pF | td | 0.75 | 1.25 | 1.8 | s | CT = 100 pF | 5 |
| RESET delay time, CT = 180 nF | td | 0.7 | 1.2 | 1.8 | s | CT = 180 nF | 5 |
| Propagation delay MR to RESET, high-to-low | tpHL | | | 150 | ns | VIH = 0.7 VDD, VIL = 0.3 VDD | 5 |
| Propagation delay SENSE to RESET, high-to-low | tpHL | | | 20 | µs | VIH = 1.05 VIT, VIL = 0.95 VIT | 5 |
| Input supply range | VDD | 1.7 | | 6.5 | V | | 4 |
| Operating temperature range | TJ | -55 | | 125 | °C | Electrical characteristics temperature range | 5 |
| Input voltage, VDD | VDD | -0.3 | | 7 | V | | 4 |
| CT voltage | VCT | -0.3 | | | V | Maximum is VDD + 0.3 V | 4 |
| Other voltage: VRESET, VMR, VSENSE | VRESET, VMR, VSENSE | -0.3 | | 7 | V | | 4 |
| RESET pin current | | | | 5 | mA | | 4 |
| Operating junction temperature | TJ | -55 | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 180.9 | | °C/W | | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 117.8 | | °C/W | | 4 |
| Junction-to-board thermal resistance | RθJB | | 27.8 | | °C/W | | 4 |
| Junction-to-top characterization parameter | ψJT | | 1.12 | | °C/W | | 4 |
| Junction-to-board characterization parameter | ψJB | | 27.3 | | °C/W | | 4 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `TPS3808G33MDBVREP`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tps3808g33mdbvrep-etched.step` / `tps3808g33mdbvrep-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps3808g33mdbvrep.step` / `tps3808g33mdbvrep.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps3808-ep.pdf) (24 pp, sha256 `5e13a0140a97a913`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/tps3808g33mdbvrep-datasheet.pdf)