TPS3808G33DBVR

{
 "schema": "adom.pads/1",
 "slug": "tps3808g33dbvr",
 "footprint": "SOT-23-6",
 "generated_from": {
  "footprint": "SOT-23-6@sha256:f341c73aac9dcb55",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -1.1375,
   -0.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-23-6@sha256:f341c73aac9dcb55"
 },
 "pad_count": 6,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.1375,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "RESET",
   "type": "output",
   "description": "Active-low, open-drain RESET output. Driven to a low-impedance state whenever SENSE is below V_IT (3.07 V typ for the G33 option) or MR is low; released to high-Z after the user-programmed reset delay expires. Requires an external pull-up resistor of 10 kΩ to 1 MΩ; the pin may be pulled above V_DD (up to 6.5 V). I_RESET max = 5 mA (absolute max).",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.1375,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "GND",
   "type": "power_in",
   "description": "Device ground reference.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.1375,
    0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "MR",
   "type": "input",
   "description": "Active-low manual reset input. Driving MR low (V_IL ≤ 0.3·V_DD) asserts RESET; MR must return above V_IH (≥ 0.7·V_DD) for RESET to release after the delay. Internally pulled up to V_DD through a ~90 kΩ resistor (70-110 kΩ), so the pin may be left unconnected if unused. Minimum input pulse width: 1 μs.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.1375,
    0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "CT",
   "type": "passive",
   "description": "Reset delay-time programming pin. Leave open for the fixed 20 ms delay, tie to V_DD (through 40 kΩ-200 kΩ) for the fixed 300 ms delay, or connect a ground-referenced capacitor ≥ 100 pF to program a user delay from 1.25 ms (100 pF) to 10 s (180 nF). Absolute-max voltage: −0.3 V to V_DD + 0.3 V.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.1375,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "SENSE",
   "type": "input",
   "description": "Voltage-monitor input. Connected internally to a precision comparator (0.5% typ threshold accuracy for V_IT ≤ 3.3 V); when the SENSE voltage drops below V_IT (3.07 V typ on the G33 option), RESET is asserted. Input current is 1.7 μA typ at V_SENSE = 6.5 V. A 1 nF-10 nF bypass to GND is recommended to reduce transient sensitivity.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.1375,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "VDD",
   "type": "power_in",
   "description": "Supply voltage input. Operating range 1.65 V to 6.5 V (1.7-6.5 V over full −40 °C to +125 °C range); I_DD = 2.4 μA typ at V_DD = 3.3 V. A 0.1 μF ceramic bypass capacitor close to the pin is recommended.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}