Generated by kicad-footprint-generator · KiCad file format 20260206
TPS3808G12QDBVRQ1
Texas Instruments · Supervisor And Reset ICs · SOT-23-6
TPS3808G12QDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Open-drain output driven to a low-impedance state when asserted (SENSE below VIT or MR low); it needs a pullup resistor from 10 kΩ to 1 MΩ and allows voltages higher than VDD. |
| 2 | GND | power_in | Ground. |
| 3 | MR | input | Manual reset input; driving it low asserts RESET, and it is internally pulled up to VDD by a 90-kΩ resistor. |
| 4 | CT | input | Reset period programming pin: connecting it to VDD through a 40-kΩ to 200-kΩ resistor or leaving it open gives fixed delay times, while a ground-referenced capacitor of ≥100 pF gives a user-programmable delay. |
| 5 | SENSE | input | Voltage sense input connected to the monitored voltage; RESET is asserted if this voltage drops below the threshold voltage (VIT). |
| 6 | VDD | power_in | Supply voltage, specified 1.8 V to 6.5 V in the recommended operating conditions; the datasheet recommends a 0.1-µF ceramic capacitor placed close to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Input supply range | VDD | 1.8 | 6.5 | V | 5 | ||
| Supply current (into VDD pin), VDD = 3.3 V | IDD | 2.4 | 5 | μA | VDD = 3.3 V, RESET not asserted, MR, RESET, CT open | 5 | |
| Supply current (into VDD pin), VDD = 6.5 V | IDD | 2.7 | 6 | μA | VDD = 6.5 V, RESET not asserted, MR, RESET, CT open | 5 | |
| Low-level output voltage | VOL | 0.3 | V | 1.3 V ≤ VDD < 1.8 V, IOL = 0.4 mA | 5 | ||
| Low-level output voltage | VOL | 0.4 | V | 1.8 V ≤ VDD ≤ 6.5 V, IOL = 1 mA | 5 | ||
| Power-up reset voltage | 0.8 | V | VOL (max) = 0.2 V, I RESET = 15 μA | 5 | |||
| Negative-going input threshold accuracy (VIT ≤ 3.3 V) | VIT | -1.5 | 0.5 | 1.5 | % | VIT ≤ 3.3 V | 5 |
| Negative-going input threshold accuracy (VIT ≤ 3.3 V, over temperature) | VIT | -1.25 | 0.5 | 1.25 | % | VIT ≤ 3.3 V, -40°C < TJ < 85°C | 5 |
| Hysteresis on VIT pin | VHYS | 1 | 2 | %VIT | -40°C < TJ < 85°C | 5 | |
| MR internal pullup resistance | R MR | 70 | 90 | kΩ | VSENSE = VIT | 5 | |
| Input current at SENSE pin | ISENSE | 1.7 | μA | VSENSE = 6.5 V | 5 | ||
| RESET leakage current | IOH | 300 | nA | V RESET = 6.5 V, RESET not asserted | 5 | ||
| MR logic low input | VIL | 0 | 0.3 | VDD | 5 | ||
| MR logic high input | VIH | 0.7 | VDD | 5 | |||
| RESET delay time, CT = Open | td | 12 | 20 | 28 | ms | CT = Open, See Figure 1 | 6 |
| RESET delay time, CT = VDD | td | 180 | 300 | 420 | ms | CT = VDD | 6 |
| RESET delay time, CT = 100 pF | td | 0.75 | 1.25 | 1.75 | ms | CT = 100 pF | 6 |
| RESET delay time, CT = 180 nF | td | 0.7 | 1.2 | 1.7 | s | CT = 180 nF | 6 |
| Propagation delay MR to RESET (high-to-low) | tpHL | 150 | ns | VIH = 0.7 VDD, VIL = 0.3 VDD | 6 | ||
| Propagation delay SENSE to RESET (high-to-low) | tpHL | 20 | μs | VIH = 1.05 VIT, VIL = 0.95 VIT | 6 | ||
| Maximum transient duration at SENSE | tw | 20 | μs | VIH = 1.05 VIT, VIL = 0.95 VIT | 6 | ||
| VDD Input voltage | VDD | -0.3 | 7 | V | 4 | ||
| CT voltage | VCT | -0.3 | V | Maximum printed as VDD + 0.3 | 4 | ||
| MR, RESET, SENSE voltage | VMR, VRESET, VSENSE | -0.3 | 7 | V | 4 | ||
| RESET pin current | IRESET | 5 | mA | 4 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| VSENSE SENSE pin voltage | VSENSE | 0 | V | Maximum printed as VDD | 4 | ||
| MR Manual reset pin voltage | MR | 0 | V | Maximum printed as VDD | 4 | ||
| Junction-to-ambient thermal resistance (DBV SOT-23) | RθJA | 180.9 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (DBV SOT-23) | RθJC(top) | 117.8 | °C/W | 5 | |||
| Junction-to-board thermal resistance (DBV SOT-23) | RθJB | 27.8 | °C/W | 5 | |||
| Junction-to-top characterization parameter (DBV SOT-23) | ψJT | 18.9 | °C/W | 5 | |||
| Junction-to-board characterization parameter (DBV SOT-23) | ψJB | 27.3 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
TPS3808G12QDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps3808g12qdbvrq1-etched.step/tps3808g12qdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps3808g12qdbvrq1.step/tps3808g12qdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
878d1dfe86ddc9da, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).