main
Ray Initial commit: component/tps3808g01qdrvrq1 a80d7fb

TPS3808G01QDRVRQ1

Texas Instruments · Supervisor And Reset ICs · WSON-6(2x2)

TPS3808G01QDRVRQ1 from Texas Instruments, in a WSON-6(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Supply voltage input from 1.8 V to 6.5 V; place 0.1-μF ceramic capacitor close to this pin.
2 SENSE input Voltage sense input pin connected to the voltage to be monitored; RESET asserts when voltage drops below threshold VIT.
3 CT input Reset period programming pin; connect to VDD through 40-kΩ to 200-kΩ resistor for 300-ms delay, leave open for 20-ms delay, or connect to capacitor ≥100 pF for 1.25 ms to 10 s user-programmable delay.
4 MR input Manual reset input pin; driving this pin low asserts RESET; internally tied to VDD by 90-kΩ pullup resistor.
5 GND power_in Ground reference; thermal pad must be soldered to printed circuit board.
6 RESET output Open-drain reset output asserted low when SENSE is below VIT or MR is low; pullup resistor from 10 kΩ to 1 MΩ required; remains low for reset delay period after both SENSE and MR return above thresholds.
7 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-6(2x2)
Category Power Management (PMIC)
Pins 7

CAD (KiCad official)

  • Symbol: TPS3808G01QDRVRQ1
  • Footprint: Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm
  • 3D model: WSON-6(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps3808g01qdrvrq1-etched.step / tps3808g01qdrvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps3808g01qdrvrq1.step / tps3808g01qdrvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 878d1dfe86ddc9da, retrieved 2026-09-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF