main
Ray Publish 0.1.0 1623d29

TPS3779CQDBVRQ1

Texas Instruments · Monitors & Reset Circuits · SOT-23-6

TPS3779CQDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VDD power_in Supply voltage input: connect a 1.5-V to 5.5-V supply to VDD to power the device, with a 0.1-µF ceramic capacitor placed close to this pin (required for VDD < 1.5 V).
2 OUT1 output Output for SENSE1 that is driven low when SENSE1 falls below VIT- and deasserted high after SENSE1 rises above VIT+; it is a push-pull output on the TPS3779-Q1 and can be pulled up to 5.5 V on the open-drain TPS3780-Q1.
3 OUT2 output Output for SENSE2 that is driven low when SENSE2 falls below VIT- and deasserted high after SENSE2 rises above VIT+; it is a push-pull output on the TPS3779-Q1 and can be pulled up to 5.5 V on the open-drain TPS3780-Q1.
4 SENSE2 input Voltage-monitoring input connected to the monitored rail through an external resistor divider, with the input range of 0 V to 5.5 V and OUT2 asserted when it drops below VIT-.
5 GND power_in Ground reference pin for the device.
6 SENSE1 input Voltage-monitoring input connected to the monitored rail through an external resistor divider, with the input range of 0 V to 5.5 V and OUT1 asserted when it drops below VIT-.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power-supply voltage (VDD) input supply range VDD 1.5 5.5 V 5
Power-on-reset voltage V(POR) 0.8 V VOL (max) = 0.2 V, IOL = 15 µA 5
Supply current (into VDD pin) IDD 2.09 5.8 µA VDD = 3.3 V, no load 5
Supply current (into VDD pin) IDD 2.29 6.5 µA VDD = 5.5 V, no load 5
Positive-going input threshold voltage VIT+ 1.194 V V(SENSEx) rising 5
Positive-going input threshold accuracy VIT+ -1 1 % V(SENSEx) rising 5
Negative-going input threshold voltage VIT- 1.074 V TPS37xxC-Q1 (10% hysteresis), V(SENSEx) falling 5
Negative-going input threshold accuracy VIT- -1 1 % V(SENSEx) falling 5
Input current I(SENSEx) -15 15 nA V(SENSEx) = 0 V or VDD 5
Low-level output voltage VOL 0.25 V VDD ≥ 1.5 V, ISINK = 0.4 mA 5
Low-level output voltage VOL 0.3 V VDD ≥ 4.5 V, ISINK = 3.2 mA 5
High-level output voltage (TPS3779-Q1 only) VOH 0.8 VDD VDD ≥ 1.5 V, ISOURCE = 0.4 mA 5
SENSEx (rising) to OUTx propagation delay tPD(r) 5.5 µs SENSEx transitions between 0 V and 1.3 V; typical values at TJ = 25°C and VDD = 3.3 V 6
SENSEx (falling) to OUTx propagation delay tPD(f) 10 µs SENSEx transitions between 0 V and 1.3 V; typical values at TJ = 25°C and VDD = 3.3 V 6
Startup delay tSD 570 µs 6
Supply voltage VDD (absolute maximum) VDD -0.3 7 V 4
Output voltage OUT1, OUT2 (TPS3779-Q1 only, absolute maximum) OUT1, OUT2 -0.3 V upper limit printed as VDD + 0.3 V 4
Output voltage OUT1, OUT2 (TPS3780-Q1 only, absolute maximum) OUT1, OUT2 -0.3 7 V TPS3780-Q1 only; not applicable to TPS3779 4
SENSE1, SENSE2 voltage (absolute maximum) SENSE1, SENSE2 -0.3 7 V 4
Current OUT1, OUT2 (absolute maximum) OUT1, OUT2 -20 20 mA 4
Operating junction temperature (absolute maximum) TJ -40 125 °C operating junction temperature range 4
Storage temperature (absolute maximum) Tstg -65 150 °C 4
Human-body model ESD (HBM) V(ESD) -2000 2000 V per AEC Q100-002 4
Charged-device model ESD (CDM) V(ESD) -500 500 V per AEC Q100-011 4
Power-supply voltage VDD 1.5 5.5 V 4
Sense voltage SENSE1, SENSE2 VSENSE 0 5.5 V 4
Output voltage OUT1, OUT2 (TPS3779-Q1 only) VOUT 0 V upper limit printed as VDD + 0.3 V 4
Current OUT1, OUT2 IOUT -5 5 mA 4
Junction temperature TJ -40 25 125 °C 4
Junction-to-ambient thermal resistance (DBV, SOT-23) RθJA 193.9 °C/W 4
Junction-to-case (top) thermal resistance (DBV, SOT-23) RθJC(top) 134.5 °C/W 4
Junction-to-board thermal resistance (DBV, SOT-23) RθJB 39 °C/W 4
Junction-to-top characterization parameter (DBV, SOT-23) ψJT 30.4 °C/W 4
Junction-to-board characterization parameter (DBV, SOT-23) ψJB 38.5 °C/W 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS3779CQDBVRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps3779cqdbvrq1-etched.step / tps3779cqdbvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps3779cqdbvrq1.step / tps3779cqdbvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (25 pp, sha256 b2a6873290f284fb, retrieved 2026-11-13, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF