main
Ray
Publish 0.1.0
6fc825f
TPS3779ADBVR
Texas Instruments · Monitors & Reset Circuits · SOT-23-6
TPS3779ADBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply voltage input: connect a 1.5-V to 6.5-V supply to power the device, with a 0.1-µF ceramic capacitor placed close to the pin (required for VDD < 1.5 V). |
| 2 | OUT1 | output | Output for SENSE1, push-pull on the TPS3779 (driven low when SENSE1 falls below VIT- and high after it rises above VIT+); the TPS3780 open-drain version can be pulled up to 6.5 V independent of VDD and requires a pull-up resistor. |
| 3 | OUT2 | output | Output for SENSE2, push-pull on the TPS3779 (driven low when SENSE2 falls below VIT- and high after it rises above VIT+); the TPS3780 open-drain version can be pulled up to 6.5 V independent of VDD and requires a pull-up resistor. |
| 4 | SENSE2 | input | Monitored-voltage input connected through an external resistor divider; OUT2 is asserted when the voltage at this pin drops below the threshold VIT-, with a recommended sense voltage range of 0 V to 6.5 V. |
| 5 | GND | power_in | Ground reference pin for the device. |
| 6 | SENSE1 | input | Monitored-voltage input connected through an external resistor divider; OUT1 is asserted when the voltage at this pin drops below the threshold VIT-, with a recommended sense voltage range of 0 V to 6.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply range | VDD | 1.5 | 6.5 | V | 5 | ||
| Supply current into VDD pin | IDD | 2.09 | 3.72 | µA | VDD = 3.3 V, no load, -40°C < TJ < 85°C | 5 | |
| Supply current into VDD pin | IDD | 5.8 | µA | VDD = 3.3 V, no load, -40°C < TJ < 125°C | 5 | ||
| Supply current into VDD pin | IDD | 2.29 | 4 | µA | VDD = 6.5 V, no load, -40°C < TJ < 85°C | 5 | |
| Supply current into VDD pin | IDD | 6.5 | µA | VDD = 6.5 V, no load, -40°C < TJ < 125°C | 5 | ||
| Positive-going threshold (VIT+) accuracy | VIT+ | -1 | 1 | % | V(SENSE) rising voltage | 5 | |
| Negative-going threshold (VIT-) accuracy | VIT- | -1 | 1 | % | V(SENSE) falling voltage | 5 | |
| Input current | I(SENSE) | -15 | 15 | nA | V(SENSE) = 0 V or VDD | 5 | |
| Low-level output voltage | VOL | 0.25 | V | VDD ≥ 1.2 V, ISINK = 0.4 mA | 5 | ||
| Low-level output voltage | VOL | 0.3 | V | VDD ≥ 4.5 V, ISINK = 3.2 mA | 5 | ||
| High-level output voltage (TPS3779 only), limit 0.8 VDD | VOH | 0.8 | V | VDD ≥ 1.5 V, ISOURCE = 0.4 mA | 5 | ||
| SENSE (rising) to OUT propagation delay | tPD(r) | 5.5 | µs | SENSE transitions between 0 V and 1.3 V | 6 | ||
| SENSE (falling) to OUT propagation delay | tPD(f) | 10 | µs | SENSE transitions between 0 V and 1.3 V | 6 | ||
| Startup delay | tSD | 570 | µs | SENSE transitions between 0 V and 1.3 V | 6 | ||
| Voltage VDD | VDD | -0.3 | 7 | V | 4 | ||
| Voltage OUT1, OUT2 (TPS3779 only), upper limit VDD + 0.3 V | VOUT | -0.3 | V | 4 | |||
| Voltage SENSE1, SENSE2 | VSENSE | -0.3 | 7 | V | 4 | ||
| Current OUT1, OUT2 | IOUT | -20 | 20 | mA | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Power-supply voltage | VDD | 1.5 | 6.5 | V | 4 | ||
| Sense voltage SENSE1, SENSE2 | VSENSE | 0 | 6.5 | V | 4 | ||
| Output voltage (TPS3779 only) OUT1, OUT2, upper limit VDD + 0.3 V | VOUT | 0 | V | 4 | |||
| Current OUT1, OUT2 | IOUT | -5 | 5 | mA | 4 | ||
| Junction temperature | TJ | -40 | 25 | 125 | °C | 4 | |
| Power-on reset voltage | V(POR) | 0.8 | V | VOL (max) = 0.2 V, IOL = 15 µA | 5 | ||
| Positive-going input threshold | VIT+ | 1.194 | V | V(SENSE) rising voltage | 5 | ||
| Negative-going input threshold, TPS37xxA (0.5% hysteresis) | VIT- | 1.188 | V | TPS37xxA (0.5% hysteresis), V(SENSE) falling voltage | 5 | ||
| Input capacitor | CIN | 0.1 | µF | 4 | |||
| Junction-to-ambient thermal resistance (DBV) | RθJA | 193.9 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DBV) | RθJC(top) | 134.5 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DBV) | RθJB | 39 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DBV) | ψJT | 30.4 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DBV) | ψJB | 38.5 | °C/W | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TPS3779ADBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps3779adbvr-etched.step/tps3779adbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps3779adbvr.step/tps3779adbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
a7da8ded4f330b8d, retrieved 2026-11-13, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# TPS3779ADBVR
**Texas Instruments** · Monitors & Reset Circuits · SOT-23-6
TPS3779ADBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply voltage input: connect a 1.5-V to 6.5-V supply to power the device, with a 0.1-µF ceramic capacitor placed close to the pin (required for VDD < 1.5 V). |
| 2 | OUT1 | output | Output for SENSE1, push-pull on the TPS3779 (driven low when SENSE1 falls below VIT- and high after it rises above VIT+); the TPS3780 open-drain version can be pulled up to 6.5 V independent of VDD and requires a pull-up resistor. |
| 3 | OUT2 | output | Output for SENSE2, push-pull on the TPS3779 (driven low when SENSE2 falls below VIT- and high after it rises above VIT+); the TPS3780 open-drain version can be pulled up to 6.5 V independent of VDD and requires a pull-up resistor. |
| 4 | SENSE2 | input | Monitored-voltage input connected through an external resistor divider; OUT2 is asserted when the voltage at this pin drops below the threshold VIT-, with a recommended sense voltage range of 0 V to 6.5 V. |
| 5 | GND | power_in | Ground reference pin for the device. |
| 6 | SENSE1 | input | Monitored-voltage input connected through an external resistor divider; OUT1 is asserted when the voltage at this pin drops below the threshold VIT-, with a recommended sense voltage range of 0 V to 6.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply range | VDD | 1.5 | | 6.5 | V | | 5 |
| Supply current into VDD pin | IDD | | 2.09 | 3.72 | µA | VDD = 3.3 V, no load, -40°C < TJ < 85°C | 5 |
| Supply current into VDD pin | IDD | | | 5.8 | µA | VDD = 3.3 V, no load, -40°C < TJ < 125°C | 5 |
| Supply current into VDD pin | IDD | | 2.29 | 4 | µA | VDD = 6.5 V, no load, -40°C < TJ < 85°C | 5 |
| Supply current into VDD pin | IDD | | | 6.5 | µA | VDD = 6.5 V, no load, -40°C < TJ < 125°C | 5 |
| Positive-going threshold (VIT+) accuracy | VIT+ | -1 | | 1 | % | V(SENSE) rising voltage | 5 |
| Negative-going threshold (VIT-) accuracy | VIT- | -1 | | 1 | % | V(SENSE) falling voltage | 5 |
| Input current | I(SENSE) | -15 | | 15 | nA | V(SENSE) = 0 V or VDD | 5 |
| Low-level output voltage | VOL | | | 0.25 | V | VDD ≥ 1.2 V, ISINK = 0.4 mA | 5 |
| Low-level output voltage | VOL | | | 0.3 | V | VDD ≥ 4.5 V, ISINK = 3.2 mA | 5 |
| High-level output voltage (TPS3779 only), limit 0.8 VDD | VOH | 0.8 | | | V | VDD ≥ 1.5 V, ISOURCE = 0.4 mA | 5 |
| SENSE (rising) to OUT propagation delay | tPD(r) | | | 5.5 | µs | SENSE transitions between 0 V and 1.3 V | 6 |
| SENSE (falling) to OUT propagation delay | tPD(f) | | | 10 | µs | SENSE transitions between 0 V and 1.3 V | 6 |
| Startup delay | tSD | | | 570 | µs | SENSE transitions between 0 V and 1.3 V | 6 |
| Voltage VDD | VDD | -0.3 | | 7 | V | | 4 |
| Voltage OUT1, OUT2 (TPS3779 only), upper limit VDD + 0.3 V | VOUT | -0.3 | | | V | | 4 |
| Voltage SENSE1, SENSE2 | VSENSE | -0.3 | | 7 | V | | 4 |
| Current OUT1, OUT2 | IOUT | -20 | | 20 | mA | | 4 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Power-supply voltage | VDD | 1.5 | | 6.5 | V | | 4 |
| Sense voltage SENSE1, SENSE2 | VSENSE | 0 | | 6.5 | V | | 4 |
| Output voltage (TPS3779 only) OUT1, OUT2, upper limit VDD + 0.3 V | VOUT | 0 | | | V | | 4 |
| Current OUT1, OUT2 | IOUT | -5 | | 5 | mA | | 4 |
| Junction temperature | TJ | -40 | 25 | 125 | °C | | 4 |
| Power-on reset voltage | V(POR) | | 0.8 | | V | VOL (max) = 0.2 V, IOL = 15 µA | 5 |
| Positive-going input threshold | VIT+ | | 1.194 | | V | V(SENSE) rising voltage | 5 |
| Negative-going input threshold, TPS37xxA (0.5% hysteresis) | VIT- | | 1.188 | | V | TPS37xxA (0.5% hysteresis), V(SENSE) falling voltage | 5 |
| Input capacitor | CIN | | 0.1 | | µF | | 4 |
| Junction-to-ambient thermal resistance (DBV) | RθJA | | 193.9 | | °C/W | | 4 |
| Junction-to-case (top) thermal resistance (DBV) | RθJC(top) | | 134.5 | | °C/W | | 4 |
| Junction-to-board thermal resistance (DBV) | RθJB | | 39 | | °C/W | | 4 |
| Junction-to-top characterization parameter (DBV) | ψJT | | 30.4 | | °C/W | | 4 |
| Junction-to-board characterization parameter (DBV) | ψJB | | 38.5 | | °C/W | | 4 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `TPS3779ADBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tps3779adbvr-etched.step` / `tps3779adbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps3779adbvr.step` / `tps3779adbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps3779a.pdf) (28 pp, sha256 `a7da8ded4f330b8d`, retrieved 2026-11-13, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/tps3779adbvr-datasheet.pdf)