TPS3702CX12QDDCRQ1

{
  "slug": "tps3702cx12qddcrq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Supervisor And Reset ICs, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps3702cx12qddcrq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps3702cx12qddcrq1.kicad_sym",
    "tps3702cx12qddcrq1.kicad_mod",
    "tps3702cx12qddcrq1.glb",
    "tps3702cx12qddcrq1.step",
    "tps3702cx12qddcrq1.lbr",
    "docs/hero.png",
    "docs/tps3702cx12qddcrq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps3702cx12qddcrq1-hero.glb",
    "tps3702cx12qddcrq1-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS3702CX12QDDCRQ1",
    "manufacturer": "Texas Instruments",
    "package": "TSOT-23-6",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps3702-q1",
    "parts": {
      "symbol": "tps3702cx12qddcrq1.kicad_sym",
      "footprint": "tps3702cx12qddcrq1.kicad_mod",
      "model_3d": "tps3702cx12qddcrq1-hero.glb",
      "model_3d_plain": "tps3702cx12qddcrq1.glb",
      "model_3d_step": "tps3702cx12qddcrq1-etched.step",
      "model_3d_step_plain": "tps3702cx12qddcrq1.step",
      "lbr": "tps3702cx12qddcrq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C702150",
      "digikey": "296-42379-2-ND",
      "mouser": "595-3702CX12QDDCRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-10T20:05:37Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-42379-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-3702CX12QDDCRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "UV",
        "type": "output",
        "description": "Active-low, open-drain undervoltage output that goes low when SENSE falls below the internal undervoltage threshold VIT-, with output current limited to 0.3 to 10 mA and a pull-up resistor of 2.2 kΩ to 10 MΩ required."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the device."
      },
      {
        "number": "3",
        "name": "SENSE",
        "type": "input",
        "description": "Input for the monitored supply rail, specified from 0 to 6.5 V, which drives UV low below the undervoltage threshold and OV low above the overvoltage threshold."
      },
      {
        "number": "4",
        "name": "SET",
        "type": "input",
        "description": "Configures the threshold voltages, with an input range of 0 to 6.5 V and the selectable configurations defined in Table 8-1."
      },
      {
        "number": "5",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage input that must be within 2 V to 18 V, with a 0.1 µF ceramic capacitor recommended close to the pin."
      },
      {
        "number": "6",
        "name": "OV",
        "type": "output",
        "description": "Active-low, open-drain overvoltage output that goes low when SENSE rises above the internal overvoltage threshold VIT+, with output voltage up to 18 V, output current 0.3 to 10 mA, and a pull-up resistor of 2.2 kΩ to 10 MΩ required."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table (page 3) covers the TPS3702-Q1 DDC package generically. The ordering addendum (pages 2; The SET pin description refers to Table 8-1 for threshold configuration, which is not in the provide; The datasheet lists VDD with direction I (input). It is mapped to KiCad power_in as a supply pin, wh"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0446,
        "at": "2026-10-10T20:05:23"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps3702-q1",
        "pages": 29,
        "sha256": "8b204b8038a50a4f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps3702cx12qddcrq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1007b8f67a3e81e2c5182bfd1fd27afe4d8d3710e0bfa1a14b8a91db8b595eb5",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps3702cx12qddcrq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "99091f1fd0ee29eb9b71ce4998b437a47bae57ed7cefb3ec1d36cdcc387c4d19",
        "checked": "2026-11-03",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}