main
Ray
Publish 0.1.0
9b0cd9e
TPS3702CX12DDCR
Texas Instruments · Supervisor And Reset ICs · TSOT-23-6
TPS3702CX12DDCR from Texas Instruments, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | UV | output | Active-low, open-drain undervoltage output that goes low when SENSE falls below the internal undervoltage threshold VIT(UV)-, and must be connected to a pull-up resistor to the desired pull-up voltage (outputs can be pulled up to 18 V and sink up to 10 mA). |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | SENSE | input | Input for the monitored supply rail, with a recommended input voltage range of 0 V to 6.5 V (7.0 V absolute maximum) that drives the UV pin low below the undervoltage threshold and the OV pin low above the overvoltage threshold. |
| 4 | SET | input | Threshold-select input where a voltage above VIH(SET) (750 mV) selects the tighter window and a voltage below VIL(SET) (250 mV) selects the wider window, with a recommended range of 0 V to 6.5 V. |
| 5 | VDD | power_in | Supply voltage input that must be within 2 V to 18 V, with a 0.1 µF ceramic capacitor recommended close to the pin. |
| 6 | OV | output | Active-low, open-drain overvoltage output that goes low when SENSE rises above the internal overvoltage threshold VIT(+)(OV) and requires a pull-up resistor to the desired pull-up voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VDD | 2 | 18 | V | 5 | ||
| Positive-going threshold accuracy | VIT+(OV) | -0.9 | 0.25 | 0.9 | % | VSET ≤ VIL(SET), VSET ≥ VIH(SET) | 5 |
| Negative-going threshold accuracy | VIT-(UV) | -0.9 | 0.25 | 0.9 | % | VSET ≤ VIL(SET), VSET ≥ VIH(SET) | 5 |
| Hysteresis voltage | VHYS | 0.3 | 0.55 | 0.8 | % | TPS3702xXx | 5 |
| Supply current | IDD | 6 | 10 | µA | VDD = 2V | 5 | |
| Supply current | IDD | 7 | 12 | µA | VDD ≥ 5V | 5 | |
| Input current, SENSE pin | ISENSE | 1 | 1.5 | µA | VSENSE = 5V | 5 | |
| Undervoltage lockout | UVLO | 1.3 | 1.7 | V | VDD falling | 5 | |
| Supply pin voltage | VDD | 2 | 18 | V | 4 | ||
| Input pin voltage (SENSE) | VSENSE | 0 | 6.5 | V | 4 | ||
| SET pin voltage | VSET | 0 | 6.5 | V | 4 | ||
| Output pin voltage | VUV, VOV | 0 | 18 | V | 4 | ||
| Output pin current | IUV, IOV | 0.3 | 10 | mA | 4 | ||
| Pull-up resistor | RPU | 2.2 | 10000 | kΩ | 4 | ||
| Supply pin voltage (absolute) | VDD | -0.3 | 20 | V | 4 | ||
| Output pin voltage (absolute) | VUV, VOV | -0.3 | 20 | V | 4 | ||
| Input pin voltage (absolute) | VSENSE, VSET | -0.3 | 7 | V | 4 | ||
| Output pin current (absolute) | IUV, IOV | -40 | 40 | mA | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 201.6 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 47.8 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 51.2 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 0.7 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 50.8 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
TPS3702CX12DDCR - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
tps3702cx12ddcr-etched.step/tps3702cx12ddcr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps3702cx12ddcr.step/tps3702cx12ddcr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
3f1fb9255cfa9b22, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS3702CX12DDCR
**Texas Instruments** · Supervisor And Reset ICs · TSOT-23-6
TPS3702CX12DDCR from Texas Instruments, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | UV | output | Active-low, open-drain undervoltage output that goes low when SENSE falls below the internal undervoltage threshold VIT(UV)-, and must be connected to a pull-up resistor to the desired pull-up voltage (outputs can be pulled up to 18 V and sink up to 10 mA). |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | SENSE | input | Input for the monitored supply rail, with a recommended input voltage range of 0 V to 6.5 V (7.0 V absolute maximum) that drives the UV pin low below the undervoltage threshold and the OV pin low above the overvoltage threshold. |
| 4 | SET | input | Threshold-select input where a voltage above VIH(SET) (750 mV) selects the tighter window and a voltage below VIL(SET) (250 mV) selects the wider window, with a recommended range of 0 V to 6.5 V. |
| 5 | VDD | power_in | Supply voltage input that must be within 2 V to 18 V, with a 0.1 µF ceramic capacitor recommended close to the pin. |
| 6 | OV | output | Active-low, open-drain overvoltage output that goes low when SENSE rises above the internal overvoltage threshold VIT(+)(OV) and requires a pull-up resistor to the desired pull-up voltage. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VDD | 2 | | 18 | V | | 5 |
| Positive-going threshold accuracy | VIT+(OV) | -0.9 | 0.25 | 0.9 | % | VSET ≤ VIL(SET), VSET ≥ VIH(SET) | 5 |
| Negative-going threshold accuracy | VIT-(UV) | -0.9 | 0.25 | 0.9 | % | VSET ≤ VIL(SET), VSET ≥ VIH(SET) | 5 |
| Hysteresis voltage | VHYS | 0.3 | 0.55 | 0.8 | % | TPS3702xXx | 5 |
| Supply current | IDD | | 6 | 10 | µA | VDD = 2V | 5 |
| Supply current | IDD | | 7 | 12 | µA | VDD ≥ 5V | 5 |
| Input current, SENSE pin | ISENSE | | 1 | 1.5 | µA | VSENSE = 5V | 5 |
| Undervoltage lockout | UVLO | 1.3 | | 1.7 | V | VDD falling | 5 |
| Supply pin voltage | VDD | 2 | | 18 | V | | 4 |
| Input pin voltage (SENSE) | VSENSE | 0 | | 6.5 | V | | 4 |
| SET pin voltage | VSET | 0 | | 6.5 | V | | 4 |
| Output pin voltage | VUV, VOV | 0 | | 18 | V | | 4 |
| Output pin current | IUV, IOV | 0.3 | | 10 | mA | | 4 |
| Pull-up resistor | RPU | 2.2 | | 10000 | kΩ | | 4 |
| Supply pin voltage (absolute) | VDD | -0.3 | | 20 | V | | 4 |
| Output pin voltage (absolute) | VUV, VOV | -0.3 | | 20 | V | | 4 |
| Input pin voltage (absolute) | VSENSE, VSET | -0.3 | | 7 | V | | 4 |
| Output pin current (absolute) | IUV, IOV | -40 | | 40 | mA | | 4 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 201.6 | | °C/W | | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 47.8 | | °C/W | | 4 |
| Junction-to-board thermal resistance | RθJB | | 51.2 | | °C/W | | 4 |
| Junction-to-top characterization parameter | ψJT | | 0.7 | | °C/W | | 4 |
| Junction-to-board characterization parameter | ψJB | | 50.8 | | °C/W | | 4 |
## CAD (KiCad official)
- Symbol: `TPS3702CX12DDCR`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `tps3702cx12ddcr-etched.step` / `tps3702cx12ddcr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps3702cx12ddcr.step` / `tps3702cx12ddcr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tps3702.pdf) (33 pp, sha256 `3f1fb9255cfa9b22`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps3702cx12ddcr-datasheet.pdf)