component
TPS3600D50PW
Public Made by Adomby adom
Texas Instruments Supervisor And Reset ICs, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# TPS3600D50PW++**Texas Instruments** · Supervisor And Reset ICs · TSSOP-14++TPS3600D50PW from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VOUT | power_out | Supply output that the supervisor monitors; RESET stays active while VOUT remains below the threshold voltage VIT. |+| 2 | VDD | power_in | Input supply voltage; the TPS3600D50 variant has a 5.0 V nominal supply. |+| 3 | GND | power_in | Ground reference for the device. |+| 4 | MSWITCH | input | Manual switch to force the device into battery-backup mode; connect to GND if not used. |+| 5 | CEIN | input | Chip-enable input passed through a series transmission gate to CEOUT; it goes high-impedance while reset is asserted. |+| 6 | BATTON | output | Logic output and external bypass switch driver output. |+| 7 | PFI | input | Power-fail comparator input; connect to GND if not used. |+| 8 | PFO | output | Power-fail comparator output. |+| 9 | BATTOK | output | Battery status output that transitions high-to-low when the backup battery voltage VBAT falls below the negative-going threshold V(BOK); the battery is checked every 200 ms. |+| 10 | CEOUT | output | Chip-enable output; during disable mode an active pullup connects CEOUT to VOUT. |+| 11 | MR | input | Manual reset input. |+| 12 | WDI | input | Watchdog timer input, with the watchdog timing set to an 800 ms time-out per the features list. |+| 13 | RESET | output | Active-low reset output; asserted during power-on until the supply exceeds the threshold, and again on a brownout or power failure. |+| 14 | VBAT | power_in | Backup-battery input, which can exceed VDD per the features list. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-14 |+| Category | Power Management (PMIC) |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `TPS3600D50PW`+- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`+- 3D model: TSSOP-14 (KiCad packages3D, STEP)+- 3D model files: `tps3600d50pw-etched.step` / `tps3600d50pw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps3600d50pw.step` / `tps3600d50pw.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps3600) (28 pp, sha256 `22e4caa11ae7d5c6`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps3600d50pw-datasheet.pdf)
page.jsonadded+236@@ -0,0 +1,236 @@+{+ "slug": "tps3600d50pw",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Supervisor And Reset ICs, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps3600d50pw",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps3600d50pw.kicad_sym",+ "tps3600d50pw.kicad_mod",+ "tps3600d50pw.glb",+ "tps3600d50pw.step",+ "tps3600d50pw.lbr",+ "docs/hero.png",+ "docs/tps3600d50pw-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps3600d50pw-hero.glb",+ "tps3600d50pw-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS3600D50PW",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-14",+ "pin_count": 14,+ "category": "Power Management (PMIC)",+ "subcategory": "Supervisor And Reset ICs",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps3600",+ "parts": {+ "symbol": "tps3600d50pw.kicad_sym",+ "footprint": "tps3600d50pw.kicad_mod",+ "model_3d": "tps3600d50pw-hero.glb",+ "model_3d_plain": "tps3600d50pw.glb",+ "model_3d_step": "tps3600d50pw-etched.step",+ "model_3d_step_plain": "tps3600d50pw.step",+ "lbr": "tps3600d50pw.lbr"+ },+ "distributor_links": {+ "lcsc": "C1355206",+ "digikey": "2156-TPS3600D50PW-ND",+ "mouser": "595-TPS3600D50PW"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T05:03:39Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "2156-TPS3600D50PW-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS3600D50PW",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VOUT",+ "type": "power_out",+ "description": "Supply output that the supervisor monitors; RESET stays active while VOUT remains below the threshold voltage VIT."+ },+ {+ "number": "2",+ "name": "VDD",+ "type": "power_in",+ "description": "Input supply voltage; the TPS3600D50 variant has a 5.0 V nominal supply."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "4",+ "name": "MSWITCH",+ "type": "input",+ "description": "Manual switch to force the device into battery-backup mode; connect to GND if not used."+ },+ {+ "number": "5",+ "name": "CEIN",+ "type": "input",+ "description": "Chip-enable input passed through a series transmission gate to CEOUT; it goes high-impedance while reset is asserted."+ },+ {+ "number": "6",+ "name": "BATTON",+ "type": "output",+ "description": "Logic output and external bypass switch driver output."+ },+ {+ "number": "7",+ "name": "PFI",+ "type": "input",+ "description": "Power-fail comparator input; connect to GND if not used."+ },+ {+ "number": "8",+ "name": "PFO",+ "type": "output",+ "description": "Power-fail comparator output."+ },+ {+ "number": "9",+ "name": "BATTOK",+ "type": "output",+ "description": "Battery status output that transitions high-to-low when the backup battery voltage VBAT falls below the negative-going threshold V(BOK); the battery is checked every 200 ms."+ },+ {+ "number": "10",+ "name": "CEOUT",+ "type": "output",+ "description": "Chip-enable output; during disable mode an active pullup connects CEOUT to VOUT."+ },+ {+ "number": "11",+ "name": "MR",+ "type": "input",+ "description": "Manual reset input."+ },+ {+ "number": "12",+ "name": "WDI",+ "type": "input",+ "description": "Watchdog timer input, with the watchdog timing set to an 800 ms time-out per the features list."+ },+ {+ "number": "13",+ "name": "RESET",+ "type": "output",+ "description": "Active-low reset output; asserted during power-on until the supply exceeds the threshold, and again on a brownout or power failure."+ },+ {+ "number": "14",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup-battery input, which can exceed VDD per the features list."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin-to-name mapping taken from the Terminal Functions table on page 6 (NAME/NO. columns); the page 1; The datasheet lists VBAT as I and VOUT as O; they are typed here as power_in and power_out because t; The datasheet does not state the active level of MR or the power-fail output PFO polarity beyond the"+ ],+ "pages_sent": 8,+ "cost_usd": 0.0514,+ "at": "2026-10-08T05:03:23"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps3600",+ "pages": 28,+ "sha256": "22e4caa11ae7d5c6",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps3600d50pw.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps3600d50pw-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "e0e4897742c3d9d00c0a7446dc9bb77e23cd6fccfa43ca2997134b1bd5b7b49c",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}