component
TPS3307-33MDGNREP
Public Made by Adomby adom
Texas Instruments Supervisor And Reset ICs, MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS3307-33MDGNREP
Texas Instruments · Supervisor And Reset ICs · MSOP-8-EP
TPS3307-33MDGNREP from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SENSE1 | input | Supply-monitoring input with a typical negative-going threshold of 4.55 V for the TPS3307-33 (5 V nominal supervised rail); input range is 0 to (VDD+0.3)×VIT/1.25 V. |
| 2 | SENSE2 | input | Supply-monitoring input with a typical negative-going threshold of 2.93 V for the TPS3307-33 (3.3 V nominal supervised rail); input range is 0 to (VDD+0.3)×VIT/1.25 V. |
| 3 | SENSE3 | input | User-defined supply-monitoring input with a 1.25 V typical threshold, adjusted externally by a resistor divider; input range is 0 to VDD+0.3 V. |
| 4 | GND | power_in | Ground reference for all voltages; absolute maximum ratings are specified with respect to GND. |
| 5 | RESET | output | One of the two RESET outputs (the text does not reliably show which polarity this pin carries); output source/sink is limited to IOH −5 mA and IOL 5 mA maximum. |
| 6 | RESET | output | The other RESET output (the text does not reliably show which polarity this pin carries); output source/sink is limited to IOH −5 mA and IOL 5 mA maximum. |
| 7 | MR | input | Active-low manual reset input: a low level (below 0.3×VDD) forces RESET active, with high level at or above 0.7×VDD and input rise/fall rate up to 50 ns/V. |
| 8 | VDD | power_in | Supply voltage input, specified at 2 V to 6 V with an absolute maximum of 7 V relative to GND. |
| 9 | Exposed thermal pad | passive | Exposed PowerPAD thermal pad shown in the land pattern drawings for heat dissipation; the datasheet text does not state an electrical connection for it. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TPS3307-33MDGNREP - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
tps3307-33mdgnrep-etched.step/tps3307-33mdgnrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps3307-33mdgnrep.step/tps3307-33mdgnrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (20 pp, sha256
95916026a39971c7, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).