← Commit history

Initial commit: component/tps2h160aqpwprq1

Ray ·c6b383f925 ·
2 files changed +252
README.mdadded+54
@@ -0,0 +1,54 @@+# TPS2H160AQPWPRQ1++**Texas Instruments** · Global Sourcing Parts · HTSSOP-16-EP++TPS2H160AQPWPRQ1 from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN1 | input | Input control for channel 1 activation; internal pulldown. |+| 2 | IN2 | input | Input control for channel 2 activation; internal pulldown. |+| 3 | DIAG_EN | input | Enable-disable pin for diagnostics; internal pulldown. |+| 4 | NC | unconnected | No internal connection (Version A). |+| 5 | ST1 | output | Open-drain diagnostic status output for channel 1; pulled to GND on fault, requires 3.3-V or 5-V external pullup, VOL(STx)=0.2 V at ISTx=2 mA. |+| 6 | ST2 | output | Open-drain diagnostic status output for channel 2; pulled to GND on fault, requires 3.3-V or 5-V external pullup, VOL(STx)=0.2 V at ISTx=2 mA. |+| 7 | CL | output | Adjustable current limit pin; connect an external resistor to set the current-limit threshold, or connect to device GND if external current limit is not used. |+| 8 | GND | power_in | Ground pin. |+| 9 | THER | input | Thermal shutdown behavior control pin, selects latch-off or auto-retry mode; internal pulldown. |+| 10 | NC | unconnected | No internal connection. |+| 11 | OUT2 | output | Output of the channel 2 high-side switch, connected to the load. |+| 12 | OUT2 | output | Output of the channel 2 high-side switch, connected to the load. |+| 13 | VS | power_in | Power supply pin, wide operating voltage range 3.4 V to 40 V (recommended 4 V to 40 V). |+| 14 | VS | power_in | Power supply pin, wide operating voltage range 3.4 V to 40 V (recommended 4 V to 40 V). |+| 15 | OUT1 | output | Output of the channel 1 high-side switch, connected to the load. |+| 16 | OUT1 | output | Output of the channel 1 high-side switch, connected to the load. |+| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-16-EP |+| Category | Global Sourcing Parts |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS2H160AQPWPRQ1`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `tps2h160aqpwprq1-etched.step` / `tps2h160aqpwprq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps2h160aqpwprq1.step` / `tps2h160aqpwprq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps2h160-q1) (40 pp, sha256 `3efb7de2cb9fa29f`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps2h160aqpwprq1-datasheet.pdf)
page.jsonadded+198
@@ -0,0 +1,198 @@+{+  "slug": "tps2h160aqpwprq1",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Global Sourcing Parts, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "global sourcing parts",+    "tps2h160aqpwprq1",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps2h160aqpwprq1.kicad_sym",+    "tps2h160aqpwprq1.kicad_mod",+    "tps2h160aqpwprq1.glb",+    "tps2h160aqpwprq1.step",+    "tps2h160aqpwprq1.lbr",+    "docs/hero.png",+    "docs/tps2h160aqpwprq1-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS2H160AQPWPRQ1",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-16-EP",+    "pin_count": 17,+    "category": "Global Sourcing Parts",+    "subcategory": "Global Sourcing Parts",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps2h160-q1",+    "parts": {+      "symbol": "tps2h160aqpwprq1.kicad_sym",+      "footprint": "tps2h160aqpwprq1.kicad_mod",+      "model_3d": "tps2h160aqpwprq1-etched.glb",+      "model_3d_plain": "tps2h160aqpwprq1.glb",+      "model_3d_step": "tps2h160aqpwprq1-etched.step",+      "model_3d_step_plain": "tps2h160aqpwprq1.step",+      "lbr": "tps2h160aqpwprq1.lbr"+    },+    "distributor_links": {+      "lcsc": "C2653774"+    },+    "pins": [+      {+        "number": "1",+        "name": "IN1",+        "type": "input",+        "description": "Input control for channel 1 activation; internal pulldown."+      },+      {+        "number": "2",+        "name": "IN2",+        "type": "input",+        "description": "Input control for channel 2 activation; internal pulldown."+      },+      {+        "number": "3",+        "name": "DIAG_EN",+        "type": "input",+        "description": "Enable-disable pin for diagnostics; internal pulldown."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection (Version A)."+      },+      {+        "number": "5",+        "name": "ST1",+        "type": "output",+        "description": "Open-drain diagnostic status output for channel 1; pulled to GND on fault, requires 3.3-V or 5-V external pullup, VOL(STx)=0.2 V at ISTx=2 mA."+      },+      {+        "number": "6",+        "name": "ST2",+        "type": "output",+        "description": "Open-drain diagnostic status output for channel 2; pulled to GND on fault, requires 3.3-V or 5-V external pullup, VOL(STx)=0.2 V at ISTx=2 mA."+      },+      {+        "number": "7",+        "name": "CL",+        "type": "output",+        "description": "Adjustable current limit pin; connect an external resistor to set the current-limit threshold, or connect to device GND if external current limit is not used."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground pin."+      },+      {+        "number": "9",+        "name": "THER",+        "type": "input",+        "description": "Thermal shutdown behavior control pin, selects latch-off or auto-retry mode; internal pulldown."+      },+      {+        "number": "10",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "11",+        "name": "OUT2",+        "type": "output",+        "description": "Output of the channel 2 high-side switch, connected to the load."+      },+      {+        "number": "12",+        "name": "OUT2",+        "type": "output",+        "description": "Output of the channel 2 high-side switch, connected to the load."+      },+      {+        "number": "13",+        "name": "VS",+        "type": "power_in",+        "description": "Power supply pin, wide operating voltage range 3.4 V to 40 V (recommended 4 V to 40 V)."+      },+      {+        "number": "14",+        "name": "VS",+        "type": "power_in",+        "description": "Power supply pin, wide operating voltage range 3.4 V to 40 V (recommended 4 V to 40 V)."+      },+      {+        "number": "15",+        "name": "OUT1",+        "type": "output",+        "description": "Output of the channel 1 high-side switch, connected to the load."+      },+      {+        "number": "16",+        "name": "OUT1",+        "type": "output",+        "description": "Output of the channel 1 high-side switch, connected to the load."+      },+      {+        "number": "17",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Discrepancy between pin function table (page 4) and pin configuration diagram (page 3): the table li; Thermal pad (exposed metal) not numbered in standard pinout; it connects to device GND according to ",+          "exposed pad 17 added from the footprint"+        ],+        "pages_sent": 40,+        "cost_usd": 0.431,+        "at": "2026-09-24T01:32:30"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps2h160-q1",+        "pages": 40,+        "sha256": "3efb7de2cb9fa29f",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file