component
TPS2H160AQPWPRQ1
Public Made by Adomby adom
Texas Instruments Global Sourcing Parts, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS2H160AQPWPRQ1
Texas Instruments · Global Sourcing Parts · HTSSOP-16-EP
TPS2H160AQPWPRQ1 from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Input control for channel 1 activation; internal pulldown. |
| 2 | IN2 | input | Input control for channel 2 activation; internal pulldown. |
| 3 | DIAG_EN | input | Enable-disable pin for diagnostics; internal pulldown. |
| 4 | NC | unconnected | No internal connection (Version A). |
| 5 | ST1 | output | Open-drain diagnostic status output for channel 1; pulled to GND on fault, requires 3.3-V or 5-V external pullup, VOL(STx)=0.2 V at ISTx=2 mA. |
| 6 | ST2 | output | Open-drain diagnostic status output for channel 2; pulled to GND on fault, requires 3.3-V or 5-V external pullup, VOL(STx)=0.2 V at ISTx=2 mA. |
| 7 | CL | output | Adjustable current limit pin; connect an external resistor to set the current-limit threshold, or connect to device GND if external current limit is not used. |
| 8 | GND | power_in | Ground pin. |
| 9 | THER | input | Thermal shutdown behavior control pin, selects latch-off or auto-retry mode; internal pulldown. |
| 10 | NC | unconnected | No internal connection. |
| 11 | OUT2 | output | Output of the channel 2 high-side switch, connected to the load. |
| 12 | OUT2 | output | Output of the channel 2 high-side switch, connected to the load. |
| 13 | VS | power_in | Power supply pin, wide operating voltage range 3.4 V to 40 V (recommended 4 V to 40 V). |
| 14 | VS | power_in | Power supply pin, wide operating voltage range 3.4 V to 40 V (recommended 4 V to 40 V). |
| 15 | OUT1 | output | Output of the channel 1 high-side switch, connected to the load. |
| 16 | OUT1 | output | Output of the channel 1 high-side switch, connected to the load. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-16-EP |
| Category | Global Sourcing Parts |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
TPS2H160AQPWPRQ1 - Footprint:
Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)
- 3D model files:
tps2h160aqpwprq1-etched.step/tps2h160aqpwprq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps2h160aqpwprq1.step/tps2h160aqpwprq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
3efb7de2cb9fa29f, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).