main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs tps27s100bpwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps27s100bpwpr: viewers · Ray
package.json tps27s100bpwpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps27s100bpwpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps27s100bpwpr · Ray
tps27s100bpwpr-etched.fit.json tps27s100bpwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps27s100bpwpr-etched.glb tps27s100bpwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps27s100bpwpr-etched.step tps27s100bpwpr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps27s100bpwpr.glb Publish 0.1.0 · Ray
tps27s100bpwpr.kicad_mod Publish 0.1.0 · Ray
tps27s100bpwpr.kicad_sym Publish 0.1.0 · Ray
tps27s100bpwpr.lbr Publish 0.1.0 · Ray
tps27s100bpwpr.step Publish 0.1.0 · Ray

TPS27S100BPWPR

Texas Instruments · Power Distribution Switches · HTSSOP-14-EP

TPS27S100BPWPR from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection; leave floating.
2 GND power_in Ground pin.
3 EN input Enable control for channel activation; digital logic input, VIH = 2V, VIL = 0.8V.
4 NC unconnected No connection; leave floating.
5 OUT output Output connected to load; max 4A nominal current, 80-100 mΩ on-state resistance @ 25°C.
6 OUT output Output connected to load; max 4A nominal current, 80-100 mΩ on-state resistance @ 25°C.
7 OUT output Output connected to load; max 4A nominal current, 80-100 mΩ on-state resistance @ 25°C.
8 IN power_in Power supply input; operating voltage VIN = 5V to 40V.
9 IN power_in Power supply input; operating voltage VIN = 5V to 40V.
10 IN power_in Power supply input; operating voltage VIN = 5V to 40V.
11 NC unconnected No connection; leave floating.
12 DIAG_EN input Diagnostic enable/disable control; digital logic input, VIH = 2V, VIL = 0.8V; tie to GND if not used.
13 ILIM output Adjustable current-limit threshold pin; connect external resistor to set limit 0.5A to 6A or tie to GND for internal limit.
14 IMON output Analog current-monitor output; sources 1/500 of load current; linear range 0-4V for 0-4A load current.
15 Thermal Pad passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-14-EP
Category Power Management (PMIC)
Pins 15

CAD (KiCad official)

  • Symbol: TPS27S100BPWPR
  • Footprint: Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
  • 3D model files: tps27s100bpwpr-etched.step / tps27s100bpwpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps27s100bpwpr.step / tps27s100bpwpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 17621f8d05d45bc2, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF