component
TPS274160BRLHR
Public Made by Adomby adom
Texas Instruments Power Distribution Switches, QFN-28-EP(4x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS274160BRLHR
Texas Instruments · Power Distribution Switches · QFN-28-EP(4x5)
TPS274160BRLHR from Texas Instruments, in a QFN-28-EP(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN3 | input | Input control for channel 3 activation; internal pulldown. |
| 2 | EN4 | input | Input control for channel 4 activation; internal pulldown. |
| 3 | SEH | input | CS channel-selection high bit; internal pulldown (version B only). |
| 4 | SEL | input | CS channel-selection low bit; internal pulldown (version B only). |
| 5 | FAULT | output | Global fault report with open-drain structure, ORed logic for quad-channel fault conditions (version B only). |
| 6 | CS | output | Current-sense output (version B only). |
| 7 | CL | output | Adjustable current limit; connect to device GND if external current limit is not used. |
| 8 | NC | unconnected | No internal connection. |
| 9 | GND | power_in | Ground pin. |
| 10 | THER | input | Thermal shutdown behavior control, latch off or auto-retry; internal pulldown. |
| 11 | DIAG_EN | input | Enable-disable pin for diagnostics; internal pulldown. |
| 12 | OUT4 | output | Output of the channel 4 high side-switch, connect to the load. |
| 13 | OUT4 | output | Output of the channel 4 high side-switch, connect to the load. |
| 14 | OUT3 | output | Output of the channel 3 high side-switch, connect to the load. |
| 15 | OUT3 | output | Output of the channel 3 high side-switch, connect to the load. |
| 16 | NC | unconnected | No internal connection. |
| 17 | VS | power_in | Power supply pin; continuous supply operating range is specified in Section 7.3. |
| 18 | VS | power_in | Power supply pin; continuous supply operating range is specified in Section 7.3. |
| 19 | VS | power_in | Power supply pin; continuous supply operating range is specified in Section 7.3. |
| 20 | VS | power_in | Power supply pin; continuous supply operating range is specified in Section 7.3. |
| 21 | NC | unconnected | No internal connection. |
| 22 | OUT2 | output | Output of the channel 2 high side-switch, connect to the load. |
| 23 | OUT2 | output | Output of the channel 2 high side-switch, connect to the load. |
| 24 | OUT1 | output | Output of the channel 1 high side-switch, connect to the load. |
| 25 | OUT1 | output | Output of the channel 1 high side-switch, connect to the load. |
| 26 | GND | power_in | Ground pin. |
| 27 | EN1 | input | Input control for channel 1 activation; internal pulldown. |
| 28 | EN2 | input | Input control for channel 2 activation; internal pulldown. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | QFN-28-EP(4x5) |
| Category | Power Management (PMIC) |
| Pins | 29 |
CAD (KiCad official)
- Symbol:
TPS274160BRLHR - Footprint:
Package_DFN_QFN:QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm - 3D model: QFN-28-EP(4x5) (KiCad packages3D, STEP)
- 3D model files:
tps274160brlhr-etched.step/tps274160brlhr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps274160brlhr.step/tps274160brlhr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
43cdc091460d5673, retrieved 2026-10-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).