component
TPS27081ADDCR-TP
Public Made by Adomby adom
TECH PUBLIC Power Distribution Switches, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS27081ADDCR-TP
TECH PUBLIC · Power Distribution Switches · SOT-23-6
TPS27081ADDCR-TP from TECH PUBLIC, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R2 | passive | External gate-bias resistor connection node; R2 is described as optional in the application circuit for gate-level adjustment. |
| 2 | VOUT | power_out | Switched load output; P-channel MOSFET drain side, continuous load current up to 3.0 A. |
| 3 | VOUT | power_out | Second switched load output pin (paralleled with pin 2) to reduce drain-source on-resistance; RDS(on) 45-80 mΩ at VON/OFF = 1.8 V, VIN = 4.5 V, ID = 1 A. |
| 4 | VIN | power_in | Input supply voltage to the P-channel load switch MOSFET source; operating range 1.8 V to 8.0 V. |
| 5 | ON/OFF | input | Logic control input that enables or disables the load switch; VON/OFF range 1.5 V to 8 V as stated in electrical characteristics. |
| 6 | R1C1 | passive | Connection node for external level-detect resistor R1 (required, described as level detector/active resistor) and optional filter capacitor C1 for slew-rate or timing control. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TECH PUBLIC |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
TPS27081ADDCR-TP - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
tps27081addcr-tp-etched.step/tps27081addcr-tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps27081addcr-tp.step/tps27081addcr-tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TECH PUBLIC datasheet (6 pp, sha256
0b1aaf758ff84dea, retrieved 2026-09-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).