Generated by kicad-footprint-generator · KiCad file format 20260206
TPS26613DDFR
Texas Instruments · LED Drivers · TSOT-23-8
TPS26613DDFR from Texas Instruments, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Reference ground for all internal voltages; connect to GND of the ±Vs supply. |
| 2 | MODE | input | Mode selection pin for overload response; sets current limit to IOL, 2 × IOL, or 2 × IOL with extended IOL expiry time (GND, open, or 180 kΩ to GND), with voltage range 0 to 3 V. |
| 3 | -Vs | power_in | Negative supply for dual supply configurations; connect to GND when used in a single supply configuration (recommended -20 V to 0 V). |
| 4 | IN | passive | Signal/power input, rated -50 V to 50 V recommended (±55 V absolute maximum). |
| 5 | OUT | passive | Signal/power output, rated -50 V to 50 V recommended (±55 V absolute maximum). |
| 6 | +Vs | power_in | Positive supply for powering the device, 0 to 30 V recommended (32 V absolute maximum). |
| 7 | VSNS | input | For the TPS26610 and TPS26613: supply sensing input for transition to loop power mode; can be left open or floating if not used (0 to 5 V). |
| 8 | SGOOD | output | Signal good indicator that is low during normal operating condition and goes high outside it; can drive an external LED, sourcing current derived from +Vs. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| IN, OUT, IN-OUT voltage | -55 | 55 | V | 4 | |||
| SGOOD, EN, MODE, VSNS voltage | -0.3 | 5.5 | V | 4 | |||
| +Vs voltage | +Vs | -0.3 | 32 | V | 4 | ||
| -Vs voltage | -Vs | -22 | 0.3 | V | 4 | ||
| SGOOD current | ISGOOD | 200 | µA | 4 | |||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | HBM, all pins | 4 | |
| ESD CDM | V(ESD) | -750 | 750 | V | CDM, all pins | 4 | |
| IN, OUT voltage | -50 | 50 | V | 4 | |||
| +Vs supply voltage | +Vs | 0 | 30 | V | 4 | ||
| -Vs supply voltage | -Vs | -20 | 0 | V | 4 | ||
| EN, SGOOD, VSNS voltage | 0 | 5 | V | 4 | |||
| MODE voltage | 0 | 3 | V | 4 | |||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 117.8 | °C/W | DDF (SOT-23-THN), 8 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 57.6 | °C/W | DDF (SOT-23-THN), 8 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 40.2 | °C/W | DDF (SOT-23-THN), 8 pins | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 2.2 | °C/W | DDF (SOT-23-THN), 8 pins | 4 | ||
| Junction-to-board characterization parameter | ΨJB | 40 | °C/W | DDF (SOT-23-THN), 8 pins | 5 | ||
| IN signal voltage | V(IN) | -50 | 50 | V | 5 | ||
| Leakage from IN and OUT to GND, normal operation | IQ | -0.1 | 0.1 | µA | (-Vs) < VIN, VOUT < (+Vs, 0.35 V) | 5 | |
| Leakage from IN and OUT to GND, near +Vs | IQ | 1 | µA | (+Vs, 0.35 V) < VIN, VOUT < +Vs | 5 | ||
| Leakage to -Vs during fault, percent of loop current | IQFLT | 20 | % | VIN > +Vs, Current Limit Operation | 5 | ||
| Bipolar current limit | I(OL) | 25 | 32 | 40 | mA | V(IN)-V(OUT) = ±1 V, -Vs connected to negative supply; printed ±25/±32/±40 | 5 |
| Unipolar current limit | I(OL) | 25 | 32 | 40 | mA | V(IN)-V(OUT) = +1 V, -Vs connected to GND | 5 |
| Unipolar current limit with VIN < -Vs | I(OL) | -40 | -32 | -25 | mA | V(IN) = -24 V, V(OUT) = -19 V, -Vs = -20 V. TPS26613/14 Only | 5 |
| Transient pulse over current limit | I(OL_Pulse) | 50 | 60 | 72 | mA | V(IN)-V(OUT) = +1.5 V, MODE = Floating | 5 |
| Fast-trip current limit, MODE = GND | I(FASTRIP) | 65 | 165 | mA | MODE = GND; printed ±65 to ±165 | 5 | |
| Fast-trip current limit, MODE floating or 180 kΩ | I(FASTRIP) | 140 | 275 | mA | MODE = Floating or 180 kΩ to GND; printed ±140 to ±275 | 5 | |
| OUT overvoltage threshold, rising (offset from +Vs) | VOUT_OVLO | 0.05 | 0.3 | V | TPS26610/11/13/14 Only; printed (+Vs)+0.05 to (+Vs)+0.30 | 5 | |
| OUT overvoltage hysteresis | VOUT_OVLO_hyst | 30 | 75 | mV | 5 | ||
| OUT undervoltage threshold, falling (offset from -Vs) | VO_UVLO | -0.4 | -0.2 | V | TPS26613/14 Only; printed (-Vs)-0.40 to (-Vs)-0.20 | 6 | |
| OUT undervoltage hysteresis | VO_UVLO_hyst | 30 | 75 | mV | TPS26613/14 Only | 6 | |
| +Vs supply operating voltage | V(+Vs) | 2.25 | 30 | V | TPS26610/11/13/14 | 6 | |
| -Vs supply operating voltage | V(-Vs) | -20 | 0 | V | 6 | ||
| Difference between +Vs and -Vs | Vs_DIFF | 3 | 50 | V | 6 | ||
| Current from +Vs, normal operation | I(+Vs) | 1.07 | 1.65 | mA | SGOOD = Floating | 6 | |
| Current from +Vs, fault operation | I(+Vs) | 1.2 | 1.75 | mA | SGOOD = Floating | 6 | |
| Loop testing IN to OUT voltage drop | V(IN-OUT)no_Vs | 5 | 8.5 | V | +/-20mA current through IN pin; printed ±5 ±8.5 | 6 | |
| Percentage of forced IN current going to -Vs | IQno_Vs | 20 | % | 6 | |||
| No supply current limit | IOL_noVs | 22 | 45.5 | mA | printed ±22 to ±45.5 | 6 | |
| IN to OUT total ON resistance | RON | 4.8 | 7.5 | 12.5 | Ω | -40 ℃ < T < 125 ℃, I(IN) < Overload Current | 6 |
| SGOOD output level HIGH, +Vs > 2.5 V | VOH_SGOOD | 2 | 3 | V | (+Vs) > 2.5 V, 0 mA < ISGOOD < 1 mA | 7 | |
| MODE source current | I(MODE) | 1.55 | 2 | 2.4 | µA | 7 | |
| Overload current limit response time | tOL | 30 | 55 | µs | Load transient from 20 mA to 50 mA. Time to within 20% of IOL | 7 | |
| Pulse overload current limit response time | tOL_PULSE | 20 | 50 | µs | Load transient from 20 mA to 80 mA. Time to within 20% of IOL_Pulse | 7 | |
| OUT OVLO cutoff detection time | tOUT_OV_CUT | 1 | 5 | µs | V(OUT) ↑ 100 mV above VOUT_OVLO to FET OFF | 7 | |
| OUT UVLO cutoff detection time | tO_UV_CUT | 1 | 5 | µs | OUT ↓100 mV below VO_UVLO to FET OFF, TPS26613/14 Only | 7 | |
| VSNS rising threshold | V(SNSR) | 1.72 | V | TPS26610/13 only | 6 | ||
| VSNS falling threshold | V(SNSF) | 1 | V | TPS26610/13 only | 6 | ||
| SGOOD pull down impedance | RSGOOD | 6.3 | kΩ | 0 µA < ISGOOD < 200 µA | 7 | ||
| Mode selection resistor | RMODE | 180 | kΩ | 7 | |||
| Thermal shutdown threshold, rising | T(TSD) | 160 | °C | 7 | |||
| Thermal shutdown hysteresis | T(TSDHyst) | 11 | °C | 7 | |||
| Overload current limit expiry time | tOL_Expiry | 100 | ms | Load transient from 20 mA to 50 mA | 8 | ||
| Auto retry timer 1 | tRETRY1 | 0.8 | s | 8 | |||
| Auto retry timer 2 | tRETRY2 | 1.6 | s | 8 |
CAD (KiCad official)
- Symbol:
TPS26613DDFR - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
tps26613ddfr-etched.step/tps26613ddfr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps26613ddfr.step/tps26613ddfr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
22fc9c245d7926dd, retrieved 2026-10-31, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).