main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs tps259571dsgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps259571dsgr: viewers · Ray
package.json tps259571dsgr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps259571dsgr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps259571dsgr · Ray
tps259571dsgr-etched.fit.json tps259571dsgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps259571dsgr-etched.glb tps259571dsgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps259571dsgr-etched.step tps259571dsgr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps259571dsgr.glb Publish 0.1.0 · Ray
tps259571dsgr.kicad_mod Publish 0.1.0 · Ray
tps259571dsgr.kicad_sym Publish 0.1.0 · Ray
tps259571dsgr.lbr Publish 0.1.0 · Ray
tps259571dsgr.step Publish 0.1.0 · Ray

TPS259571DSGR

Texas Instruments · Supervisor And Reset ICs · WSON-8-EP(2x2)

TPS259571DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 dVdt output A capacitor from this pin to GND sets the output turn-on slew rate up to maximum pin voltage of 2.5 V; leave floating for fastest slew rate.
2 EN/UVLO input Active high enable input with adjustable undervoltage lockout threshold (0-6 V range) via resistor divider; must not be left floating.
3 IN power_in Power supply input pin accepting 2.7-18 V input voltage.
4 IN power_in Power supply input pin accepting 2.7-18 V input voltage.
5 OUT power_out Power supply output pin with voltage range 0 to VIN + 0.3 V.
6 FLT output Open-drain fault indicator output that pulls low on fault detection; requires external pull-up resistance and supports maximum sink current of 10 mA.
7 ILM bidirectional Dual-function analog I/O pin where external resistor (487-5000 Ω) sets current limit threshold and pin voltage monitors output load current; must not be left floating.
8 GND power_in Ground connection.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(2x2)
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: TPS259571DSGR
  • Footprint: Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
  • 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps259571dsgr-etched.step / tps259571dsgr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps259571dsgr.step / tps259571dsgr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (49 pp, sha256 c6982dad9247501e, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF