component
TPS259530DSGR
Public Made by Adomby adom
Texas Instruments Surge Protection Devices (SPDs), WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/tps259530dsgr
8e0594d
TPS259530DSGR
Texas Instruments · Surge Protection Devices (SPDs) · WSON-8-EP(2x2)
TPS259530DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | dVdt | output | Slew rate control output; connect capacitor to GND to limit output rising slew rate (3300 pF typical), leave floating for fastest turn-on slew rate. |
| 2 | EN/UVLO | input | Active high enable input with adjustable undervoltage lockout threshold; VUVLO rising 1.2 V, falling 1.1 V; do not leave floating. |
| 3 | IN | power_in | Power supply input accepting 2.7 V to 18 V nominal operating voltage; absolute maximum -0.3 V to 20 V. |
| 4 | IN | power_in | Power supply input accepting 2.7 V to 18 V nominal operating voltage; absolute maximum -0.3 V to 20 V. |
| 5 | OUT | power_out | Power output with output voltage clamp at 5.7 V typical when input overvoltage detected; VCLAMP 5.2 V to 5.7 V. |
| 6 | FLT | output | Open-drain fault event indicator output (RFLT 12 Ω typical) pulled low when thermal shutdown or ILM single-point-failure detected; requires external pull-up resistor. |
| 7 | ILM | output | Current limit and monitoring output pin; external resistor RILM (487 Ω to 5000 Ω range) to GND sets current limit 0.5 A to 4 A, pin voltage monitors load current at 276 µA/A typical gain. |
| 8 | GND | power_in | Ground connection and return path for power supply and signal reference. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Circuit Protection |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TPS259530DSGR - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps259530dsgr-etched.step/tps259530dsgr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps259530dsgr.step/tps259530dsgr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
c6982dad9247501e, retrieved 2026-09-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS259530DSGR
**Texas Instruments** · Surge Protection Devices (SPDs) · WSON-8-EP(2x2)
TPS259530DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | dVdt | output | Slew rate control output; connect capacitor to GND to limit output rising slew rate (3300 pF typical), leave floating for fastest turn-on slew rate. |
| 2 | EN/UVLO | input | Active high enable input with adjustable undervoltage lockout threshold; VUVLO rising 1.2 V, falling 1.1 V; do not leave floating. |
| 3 | IN | power_in | Power supply input accepting 2.7 V to 18 V nominal operating voltage; absolute maximum -0.3 V to 20 V. |
| 4 | IN | power_in | Power supply input accepting 2.7 V to 18 V nominal operating voltage; absolute maximum -0.3 V to 20 V. |
| 5 | OUT | power_out | Power output with output voltage clamp at 5.7 V typical when input overvoltage detected; VCLAMP 5.2 V to 5.7 V. |
| 6 | FLT | output | Open-drain fault event indicator output (RFLT 12 Ω typical) pulled low when thermal shutdown or ILM single-point-failure detected; requires external pull-up resistor. |
| 7 | ILM | output | Current limit and monitoring output pin; external resistor RILM (487 Ω to 5000 Ω range) to GND sets current limit 0.5 A to 4 A, pin voltage monitors load current at 276 µA/A typical gain. |
| 8 | GND | power_in | Ground connection and return path for power supply and signal reference. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Circuit Protection |
| Pins | 9 |
## CAD (KiCad official)
- Symbol: `TPS259530DSGR`
- Footprint: `Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm`
- 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files: `tps259530dsgr-etched.step` / `tps259530dsgr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps259530dsgr.step` / `tps259530dsgr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps2595) (49 pp, sha256 `c6982dad9247501e`, retrieved 2026-09-22, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps259530dsgr-datasheet.pdf)