component
TPS259521DSGR
Public Made by Adomby adom
Texas Instruments Monitors & Reset Circuits, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/tps259521dsgr
4c7084c
TPS259521DSGR
Texas Instruments · Monitors & Reset Circuits · WSON-8-EP(2x2)
TPS259521DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | dVdt | bidirectional | A capacitor from this pin to GND sets the output turn on slew rate; leave this pin floating for the fastest turn on slew rate. |
| 2 | EN/UVLO | input | Active high enable for the TPS259521; a resistor divider can be used to adjust the undervoltage lockout threshold and must not be left floating. |
| 3 | IN | power_in | Power input; input voltage range 2.7 V to 18 V. |
| 4 | IN | power_in | Power input; input voltage range 2.7 V to 18 V. |
| 5 | OUT | power_out | Power output; output voltage 0 to VIN + 0.3 V. |
| 6 | FLT | tri_state | Fault event indicator pulled low when a fault is detected; open-drain output requiring external pull-up resistance. |
| 7 | ILM | bidirectional | Current limit and monitor pin; an external resistor from this pin to GND sets the output current limit (487 Ω to 5000 Ω) and pin voltage monitors output load current; must not be left floating. |
| 8 | GND | power_in | Ground reference connection. |
| 9 | GND | power_in | Exposed thermal pad for heat dissipation and must be connected to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Supply Chip |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TPS259521DSGR - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps259521dsgr-etched.step/tps259521dsgr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps259521dsgr.step/tps259521dsgr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (49 pp, sha256
c6982dad9247501e, retrieved 2026-09-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS259521DSGR
**Texas Instruments** · Monitors & Reset Circuits · WSON-8-EP(2x2)
TPS259521DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | dVdt | bidirectional | A capacitor from this pin to GND sets the output turn on slew rate; leave this pin floating for the fastest turn on slew rate. |
| 2 | EN/UVLO | input | Active high enable for the TPS259521; a resistor divider can be used to adjust the undervoltage lockout threshold and must not be left floating. |
| 3 | IN | power_in | Power input; input voltage range 2.7 V to 18 V. |
| 4 | IN | power_in | Power input; input voltage range 2.7 V to 18 V. |
| 5 | OUT | power_out | Power output; output voltage 0 to VIN + 0.3 V. |
| 6 | FLT | tri_state | Fault event indicator pulled low when a fault is detected; open-drain output requiring external pull-up resistance. |
| 7 | ILM | bidirectional | Current limit and monitor pin; an external resistor from this pin to GND sets the output current limit (487 Ω to 5000 Ω) and pin voltage monitors output load current; must not be left floating. |
| 8 | GND | power_in | Ground reference connection. |
| 9 | GND | power_in | Exposed thermal pad for heat dissipation and must be connected to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Supply Chip |
| Pins | 9 |
## CAD (KiCad official)
- Symbol: `TPS259521DSGR`
- Footprint: `Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm`
- 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files: `tps259521dsgr-etched.step` / `tps259521dsgr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps259521dsgr.step` / `tps259521dsgr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps2595) (49 pp, sha256 `c6982dad9247501e`, retrieved 2026-09-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps259521dsgr-datasheet.pdf)