TPS25925
Public Made by Adomby adom
TI eFuse protection switch, VSON-10. 2.7-18 V, adjustable current limit, inrush control, overvoltage clamp. Datasheet-verified.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗README
markdownTPS25925
Texas Instruments · eFuse · VSON-10
Integrated electronic fuse that sits in a supply rail and protects the load from overcurrent, overvoltage, and inrush. An internal FET limits current to a level set by one resistor at ILIM, a capacitor at dV/dT ramps the output to tame inrush on hot-plug, and EN/UVLO sets the turn-on threshold, with a thermal shutdown backing it all up. It works on a 2.7 to 18 V rail, so it guards USB, hot-swap, and module power inputs. A one-chip replacement for a fuse plus a supervisor plus a MOSFET.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | dV/dT | input | Slew-rate programming pin. A capacitor from this pin to GND sets the ramp rate of OUT at device turn-on. |
| 2 | EN/UVLO | input | Dual-function enable / UVLO pin. Pulling low shuts off the internal pass MOSFET; pulling high enables the device. An external resistor divider from VIN sets a custom UVLO trip point. |
| 3 | VIN | power_in | Input supply voltage (nominal 5 V for TPS25925x; absolute max 20 V DC / 22 V transient). |
| 4 | VIN | power_in | Input supply voltage (nominal 5 V for TPS25925x; absolute max 20 V DC / 22 V transient). |
| 5 | VIN | power_in | Input supply voltage (nominal 5 V for TPS25925x; absolute max 20 V DC / 22 V transient). |
| 6 | OUT | power_out | Protected output of the internal pass MOSFET (30 mΩ typical Rds(on)). Rated for continuous 6.25 A output current. |
| 7 | OUT | power_out | Protected output of the internal pass MOSFET (30 mΩ typical Rds(on)). Rated for continuous 6.25 A output current. |
| 8 | OUT | power_out | Protected output of the internal pass MOSFET (30 mΩ typical Rds(on)). Rated for continuous 6.25 A output current. |
| 9 | NC | unconnected | Not connected internally. May be left floating or tied to GND. |
| 10 | ILIM | input | Current-limit programming pin. A resistor from this pin to GND sets the overload and short-circuit current limit (2-5 A range, ±15% accuracy). |
| 11 | GND | power_in | Exposed thermal pad. Serves as the device ground reference and the primary thermal path; must be soldered to the PCB GND plane. |
Key specifications
| Parameter | Value |
|---|---|
| Type | eFuse (integrated protection switch) |
| Input | 2.7-18 V |
| Current limit | Adjustable via ILIM resistor |
| Inrush control | Adjustable via dV/dT capacitor |
| Enable/UVLO | Programmable threshold (EN/UVLO) |
| Protection | Overcurrent, thermal shutdown |
| Package | VSON-10 |
Ordering variants
Same part, different packaging or reel option.
TPS25925xDRC (VSON-10)TPS25921x / TPS25940x (family variants)
CAD (KiCad official)
- Symbol:
Power_Management:TPS2592xx (KiCad official) - Footprint:
Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm_ThermalVias - 3D model: VSON-10 (KiCad packages3D, STEP)
- 3D model files:
tps25925-etched.step/tps25925-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps25925.step/tps25925.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
959aa0f67322ab34, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).