main
History Download
Ray Initial commit: component/tps25921ldr d7ebab4

TPS25921LDR

Texas Instruments · Surge Protection Devices (SPDs) · SOIC-8

TPS25921LDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference terminal.
2 SS input Soft-start pin; external capacitor to GND sets output voltage ramp rate during device turn-on.
3 ENUV input Enable/undervoltage lockout input; threshold V(ENR)=1.39V rising, V(ENF)=1.34V falling; when pulled below 0.61V resets thermal fault latch in TPS25921L.
4 IN power_in Power supply input and device supply voltage, 4.5V to 18V operating range, 20V absolute maximum.
5 OUT power_out Power output to load; voltage equals V(IN) minus voltage drop across internal FET resistance RDS(ON).
6 FLT output Fault event indicator open-drain output, active low for undervoltage, overvoltage, and thermal shutdown events; maximum sink current 100mA.
7 ILIM input Current limit programming input; external resistor to GND sets overload and short circuit limit (35.7kΩ to 158kΩ for 0.4A to 1.6A range).
8 OVP input Overvoltage protection input; threshold V(OVPR)=1.39V rising, V(OVPF)=1.34V falling opens internal FET and asserts FLT.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Circuit Protection
Pins 8

CAD (KiCad official)

  • Symbol: TPS25921LDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tps25921ldr-etched.step / tps25921ldr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps25921ldr.step / tps25921ldr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (40 pp, sha256 c4fc910bc1512651, retrieved 2026-09-21, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF