component
TPS25840QWRHBRQ1
Public Made by Adomby adom
Texas Instruments Power Management - Specialized, VQFN-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+70@@ -0,0 +1,70 @@+# TPS25840QWRHBRQ1++**Texas Instruments** · Power Management - Specialized · VQFN-32(5x5)++TPS25840QWRHBRQ1 from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | power_in | Input supply pin; operating range 4.5 V to 36 V with high-quality bypass capacitors to PGND. |+| 2 | IN | power_in | Input supply pin; operating range 4.5 V to 36 V with high-quality bypass capacitors to PGND. |+| 3 | IN | power_in | Input supply pin; operating range 4.5 V to 36 V with high-quality bypass capacitors to PGND. |+| 4 | EN/UVLO | input | Enable/UVLO control input with precision thresholds 1.2 V rising and 0.3 V falling, supporting external resistor divider for system protection. |+| 5 | CTRL1 | input | Logic-level mode configuration input (0 to VCC) combining with CTRL2 to select SDP, CDP, or Client operating mode. |+| 6 | CTRL2 | input | Logic-level mode configuration input (0 to VCC) combining with CTRL1 to select SDP, CDP, or Client operating mode. |+| 7 | DP_OUT | output | DP data line output to USB host controller with 800 MHz bandwidth analog switch for D+ differential signal routing. |+| 8 | DM_OUT | output | DM data line output to USB host controller with 800 MHz bandwidth analog switch for D- differential signal routing. |+| 9 | RT/SYNC | input | Resistor timing or external clock synchronization input supporting 300 kHz to 2.3 MHz frequency range via external RT resistor or AC-coupled clock. |+| 10 | LS_GD | output | Low-side NFET gate driver output providing 2-4 µA source current at 9.5-12.5 V for external current limit FET control. |+| 11 | IMON | input | Cable compensation monitor input with external RIMON resistor setting compensation voltage from 0 V to 1.5 V maximum. |+| 12 | ILIMIT | input | Current limit threshold input with external RILIMIT resistor setting average or NFET-based current limit threshold. |+| 13 | CSN/OUT | power_out | Buck regulator regulated output nominally 5.1 V ±1% (5.05 V to 5.15 V) and current sense amplifier negative input. |+| 14 | CSP | input | Current sense amplifier positive input monitoring voltage drop across external RSNS sense resistor for load current feedback. |+| 15 | BUS | input | VBUS input from USB connector with operating range 0 to 18 V and 7 V overvoltage protection threshold. |+| 16 | AGND | power_in | Analog ground reference for precision internal circuits and all electrical parameter measurements with respect to this pin. |+| 17 | DM_IN | input | DM data line input from USB connector with 800 MHz bandwidth, IEC 61000-4-2 ESD protection (±15 kV air discharge), and 3.9 V overvoltage threshold. |+| 18 | DP_IN | input | DP data line input from USB connector with 800 MHz bandwidth, IEC 61000-4-2 ESD protection (±15 kV air discharge), and 3.9 V overvoltage threshold. |+| 19 | N/C | unconnected | No electrical connection; must not be connected in application circuit. |+| 20 | INT | input | Internal circuit reference node requiring 5.1 kΩ external resistor connection to AGND for proper operation. |+| 21 | VCC | power_out | Internal LDO regulated bias supply output nominally 5 V (4.75 V to 5.25 V) requiring 2.2 µF minimum bypass capacitance to ground. |+| 22 | N/C | unconnected | No electrical connection; must not be connected in application circuit. |+| 23 | BUCK_ST | tri_state | Active-low open-drain buck converter start-up status output asserting after 150 ms soft-start and deglitch time. |+| 24 | FAULT | tri_state | Active-low open-drain fault status output asserts on overcurrent, overvoltage, or short circuit conditions with 8 ms typical deglitch. |+| 25 | PGND | power_in | Power ground return terminal connected to system ground plane and AGND via short wide traces. |+| 26 | PGND | power_in | Power ground return terminal connected to system ground plane and AGND via short wide traces. |+| 27 | PGND | power_in | Power ground return terminal connected to system ground plane and AGND via short wide traces. |+| 28 | SW | output | Buck regulator switching output node transitioning between 0 and VIN with 105 ns minimum on-time, connected to power inductor. |+| 29 | SW | output | Buck regulator switching output node transitioning between 0 and VIN with 105 ns minimum on-time, connected to power inductor. |+| 30 | SW | output | Buck regulator switching output node transitioning between 0 and VIN with 105 ns minimum on-time, connected to power inductor. |+| 31 | SW | output | Buck regulator switching output node transitioning between 0 and VIN with 105 ns minimum on-time, connected to power inductor. |+| 32 | BOOT | passive | Bootstrap capacitor connection for high-side FET driver; connect 0.1 µF high-quality ceramic X7R/X5R capacitor between this pin and SW. |+| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-32(5x5) |+| Category | Power Management (PMIC) |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `TPS25840QWRHBRQ1`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)+- 3D model files: `tps25840qwrhbrq1-etched.step` / `tps25840qwrhbrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps25840qwrhbrq1.step` / `tps25840qwrhbrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps25842-q1) (63 pp, sha256 `7fdd561732d359bc`, retrieved 2026-09-18, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps25840qwrhbrq1-datasheet.pdf)
page.jsonadded+293@@ -0,0 +1,293 @@+{+ "slug": "tps25840qwrhbrq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Power Management - Specialized, VQFN-32(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps25840qwrhbrq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps25840qwrhbrq1.kicad_sym",+ "tps25840qwrhbrq1.kicad_mod",+ "tps25840qwrhbrq1.glb",+ "tps25840qwrhbrq1.step",+ "tps25840qwrhbrq1.lbr",+ "docs/hero.png",+ "docs/tps25840qwrhbrq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS25840QWRHBRQ1",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-32(5x5)",+ "pin_count": 33,+ "category": "Power Management (PMIC)",+ "subcategory": "Power Management - Specialized",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps25842-q1",+ "parts": {+ "symbol": "tps25840qwrhbrq1.kicad_sym",+ "footprint": "tps25840qwrhbrq1.kicad_mod",+ "model_3d": "tps25840qwrhbrq1-etched.glb",+ "model_3d_plain": "tps25840qwrhbrq1.glb",+ "model_3d_step": "tps25840qwrhbrq1-etched.step",+ "model_3d_step_plain": "tps25840qwrhbrq1.step",+ "lbr": "tps25840qwrhbrq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C3189308"+ },+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "power_in",+ "description": "Input supply pin; operating range 4.5 V to 36 V with high-quality bypass capacitors to PGND."+ },+ {+ "number": "2",+ "name": "IN",+ "type": "power_in",+ "description": "Input supply pin; operating range 4.5 V to 36 V with high-quality bypass capacitors to PGND."+ },+ {+ "number": "3",+ "name": "IN",+ "type": "power_in",+ "description": "Input supply pin; operating range 4.5 V to 36 V with high-quality bypass capacitors to PGND."+ },+ {+ "number": "4",+ "name": "EN/UVLO",+ "type": "input",+ "description": "Enable/UVLO control input with precision thresholds 1.2 V rising and 0.3 V falling, supporting external resistor divider for system protection."+ },+ {+ "number": "5",+ "name": "CTRL1",+ "type": "input",+ "description": "Logic-level mode configuration input (0 to VCC) combining with CTRL2 to select SDP, CDP, or Client operating mode."+ },+ {+ "number": "6",+ "name": "CTRL2",+ "type": "input",+ "description": "Logic-level mode configuration input (0 to VCC) combining with CTRL1 to select SDP, CDP, or Client operating mode."+ },+ {+ "number": "7",+ "name": "DP_OUT",+ "type": "output",+ "description": "DP data line output to USB host controller with 800 MHz bandwidth analog switch for D+ differential signal routing."+ },+ {+ "number": "8",+ "name": "DM_OUT",+ "type": "output",+ "description": "DM data line output to USB host controller with 800 MHz bandwidth analog switch for D- differential signal routing."+ },+ {+ "number": "9",+ "name": "RT/SYNC",+ "type": "input",+ "description": "Resistor timing or external clock synchronization input supporting 300 kHz to 2.3 MHz frequency range via external RT resistor or AC-coupled clock."+ },+ {+ "number": "10",+ "name": "LS_GD",+ "type": "output",+ "description": "Low-side NFET gate driver output providing 2-4 µA source current at 9.5-12.5 V for external current limit FET control."+ },+ {+ "number": "11",+ "name": "IMON",+ "type": "input",+ "description": "Cable compensation monitor input with external RIMON resistor setting compensation voltage from 0 V to 1.5 V maximum."+ },+ {+ "number": "12",+ "name": "ILIMIT",+ "type": "input",+ "description": "Current limit threshold input with external RILIMIT resistor setting average or NFET-based current limit threshold."+ },+ {+ "number": "13",+ "name": "CSN/OUT",+ "type": "power_out",+ "description": "Buck regulator regulated output nominally 5.1 V ±1% (5.05 V to 5.15 V) and current sense amplifier negative input."+ },+ {+ "number": "14",+ "name": "CSP",+ "type": "input",+ "description": "Current sense amplifier positive input monitoring voltage drop across external RSNS sense resistor for load current feedback."+ },+ {+ "number": "15",+ "name": "BUS",+ "type": "input",+ "description": "VBUS input from USB connector with operating range 0 to 18 V and 7 V overvoltage protection threshold."+ },+ {+ "number": "16",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground reference for precision internal circuits and all electrical parameter measurements with respect to this pin."+ },+ {+ "number": "17",+ "name": "DM_IN",+ "type": "input",+ "description": "DM data line input from USB connector with 800 MHz bandwidth, IEC 61000-4-2 ESD protection (±15 kV air discharge), and 3.9 V overvoltage threshold."+ },+ {+ "number": "18",+ "name": "DP_IN",+ "type": "input",+ "description": "DP data line input from USB connector with 800 MHz bandwidth, IEC 61000-4-2 ESD protection (±15 kV air discharge), and 3.9 V overvoltage threshold."+ },+ {+ "number": "19",+ "name": "N/C",+ "type": "unconnected",+ "description": "No electrical connection; must not be connected in application circuit."+ },+ {+ "number": "20",+ "name": "INT",+ "type": "input",+ "description": "Internal circuit reference node requiring 5.1 kΩ external resistor connection to AGND for proper operation."+ },+ {+ "number": "21",+ "name": "VCC",+ "type": "power_out",+ "description": "Internal LDO regulated bias supply output nominally 5 V (4.75 V to 5.25 V) requiring 2.2 µF minimum bypass capacitance to ground."+ },+ {+ "number": "22",+ "name": "N/C",+ "type": "unconnected",+ "description": "No electrical connection; must not be connected in application circuit."+ },+ {+ "number": "23",+ "name": "BUCK_ST",+ "type": "tri_state",+ "description": "Active-low open-drain buck converter start-up status output asserting after 150 ms soft-start and deglitch time."+ },+ {+ "number": "24",+ "name": "FAULT",+ "type": "tri_state",+ "description": "Active-low open-drain fault status output asserts on overcurrent, overvoltage, or short circuit conditions with 8 ms typical deglitch."+ },+ {+ "number": "25",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground return terminal connected to system ground plane and AGND via short wide traces."+ },+ {+ "number": "26",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground return terminal connected to system ground plane and AGND via short wide traces."+ },+ {+ "number": "27",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground return terminal connected to system ground plane and AGND via short wide traces."+ },+ {+ "number": "28",+ "name": "SW",+ "type": "output",+ "description": "Buck regulator switching output node transitioning between 0 and VIN with 105 ns minimum on-time, connected to power inductor."+ },+ {+ "number": "29",+ "name": "SW",+ "type": "output",+ "description": "Buck regulator switching output node transitioning between 0 and VIN with 105 ns minimum on-time, connected to power inductor."+ },+ {+ "number": "30",+ "name": "SW",+ "type": "output",+ "description": "Buck regulator switching output node transitioning between 0 and VIN with 105 ns minimum on-time, connected to power inductor."+ },+ {+ "number": "31",+ "name": "SW",+ "type": "output",+ "description": "Buck regulator switching output node transitioning between 0 and VIN with 105 ns minimum on-time, connected to power inductor."+ },+ {+ "number": "32",+ "name": "BOOT",+ "type": "passive",+ "description": "Bootstrap capacitor connection for high-side FET driver; connect 0.1 µF high-quality ceramic X7R/X5R capacitor between this pin and SW."+ },+ {+ "number": "33",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 33 added from the footprint"+ ],+ "pages_sent": 63,+ "cost_usd": 0.7699,+ "at": "2026-09-18T00:53:01"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps25842-q1",+ "pages": 63,+ "sha256": "7fdd561732d359bc",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 33,+ "described": 33,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}