component
TPS25730SRSMR
Public Made by Adomby adom
Texas Instruments USB PD, VQFN-32-EP(4x4). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+280−8@@ -1,13 +1,290 @@ {+ "schema_version": 1,+ "type": "component", "slug": "tps25730srsmr",+ "title": "TPS25730SRSMR",+ "brief": "Texas Instruments USB PD, VQFN-32-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Texas Instruments USB PD, VQFN-32-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "power management (pmic)", "tps25730srsmr" ],+ "component": {+ "mpn": "TPS25730SRSMR",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-32-EP(4x4)",+ "pin_count": 33,+ "category": "Power Management (PMIC)",+ "subcategory": "USB PD",+ "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2407041151_Texas-Instruments-TPS25730SRSMR_C22390380.pdf",+ "parts": {+ "symbol": "tps25730srsmr.kicad_sym",+ "footprint": "tps25730srsmr.kicad_mod",+ "model_3d": "tps25730srsmr.glb",+ "model_3d_step": "tps25730srsmr.step",+ "lbr": "tps25730srsmr.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "LDO_3V3",+ "type": "power_out",+ "description": "Output of the supply switched from VIN_3V3 or VBUS LDO. Bypass to GND with CLDO_3V3."+ },+ {+ "number": "2",+ "name": "ADCIN1",+ "type": "input",+ "description": "Configuration input. Connect to a resistor divider to LDO_3V3 for pin-strap configuration. Hi-Z at reset."+ },+ {+ "number": "3",+ "name": "ADCIN2",+ "type": "input",+ "description": "Configuration input. Connect to a resistor divider to LDO_3V3 for pin-strap configuration. Hi-Z at reset."+ },+ {+ "number": "4",+ "name": "LDO_1V5",+ "type": "power_out",+ "description": "Output of the core LDO. Bypass with CLDO_1V5 to GND. Cannot source current to external circuits."+ },+ {+ "number": "5",+ "name": "ADCIN3",+ "type": "input",+ "description": "Configuration input. Connect to a resistor divider to LDO_3V3 for pin-strap configuration. Hi-Z at reset."+ },+ {+ "number": "6",+ "name": "CAP_MIS",+ "type": "output",+ "description": "Open-drain output. Capability mismatch indicator: toggled = capability mismatch in negotiated PD contract; not toggled = no capability mismatch."+ },+ {+ "number": "7",+ "name": "ADCIN4",+ "type": "input",+ "description": "Configuration input. Connect to a resistor divider to LDO_3V3 for pin-strap configuration. Hi-Z at reset."+ },+ {+ "number": "8",+ "name": "I2Ct_SDA",+ "type": "bidirectional",+ "description": "I2C target serial data (open-drain). Tie to pull-up voltage through a resistor; may be grounded if unused."+ },+ {+ "number": "9",+ "name": "I2Ct_SCL",+ "type": "input",+ "description": "I2C target serial clock input. Tie to pull-up voltage through a resistor; may be grounded if unused."+ },+ {+ "number": "10",+ "name": "DBG_ACC",+ "type": "output",+ "description": "Open-drain output. Debug accessory attached Rp/Rp or Rd/Rd. 1 = debug accessory present, 0 = no debug accessory."+ },+ {+ "number": "11",+ "name": "GND",+ "type": "power_in",+ "description": "Ground. Connect to ground plane."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Ground. Connect to ground plane."+ },+ {+ "number": "13",+ "name": "PLUG_FLIP",+ "type": "output",+ "description": "Open-drain output. Cable plug orientation indicator: 1 = CC2 connected (upside-down), 0 = CC1 connected (upside-up)."+ },+ {+ "number": "14",+ "name": "GND",+ "type": "power_in",+ "description": "Ground. Connect to ground plane."+ },+ {+ "number": "15",+ "name": "GND",+ "type": "power_in",+ "description": "Ground. Connect to ground plane."+ },+ {+ "number": "16",+ "name": "GND",+ "type": "power_in",+ "description": "Ground. Connect to ground plane."+ },+ {+ "number": "17",+ "name": "FAULT_IN",+ "type": "input",+ "description": "Active-low fault input to disconnect from the port. When powered from VBUS, this causes the PD controller to lose power when VBUS is removed. 0 = disconnect from port, 1 = maintain connection (no fault)."+ },+ {+ "number": "18",+ "name": "SINK_EN",+ "type": "output",+ "description": "Active-low open-drain output. Sink path enabled indicator; may be used to control an external load switch. 0 = sink path enabled, 1 = sink path disabled."+ },+ {+ "number": "19",+ "name": "VSYS",+ "type": "power_in",+ "description": "High-voltage sinking node in the system. Used to implement reverse current protection (RCP) for the external sink path controlled by GATE_VSYS."+ },+ {+ "number": "20",+ "name": "GATE_VSYS",+ "type": "output",+ "description": "High-voltage gate driver output. Connect to the N-channel MOSFET whose source is tied to VSYS (reverse current protection FET in the external sink path)."+ },+ {+ "number": "21",+ "name": "GATE_VBUS",+ "type": "output",+ "description": "High-voltage gate driver output. Connect to the N-channel MOSFET whose source is tied to VBUS (sink path FET)."+ },+ {+ "number": "22",+ "name": "RESERVED",+ "type": "input",+ "description": "Reserved. Tie to ground or LDO_3V3."+ },+ {+ "number": "23",+ "name": "RESERVED",+ "type": "input",+ "description": "Reserved. Tie to ground or LDO_3V3."+ },+ {+ "number": "24",+ "name": "CC1",+ "type": "bidirectional",+ "description": "USB Type-C CC1 pin (CCcy). Filter noise with recommended capacitor to GND."+ },+ {+ "number": "25",+ "name": "CC2",+ "type": "bidirectional",+ "description": "USB Type-C CC2 pin (CCcy). Filter noise with recommended capacitor to GND."+ },+ {+ "number": "26",+ "name": "VBUS",+ "type": "power_in",+ "description": "USB Type-C VBUS input to internal LDO, 5-V to 20-V range. Bypass with CVBUS to GND."+ },+ {+ "number": "27",+ "name": "VBUS",+ "type": "power_in",+ "description": "USB Type-C VBUS input to internal LDO, 5-V to 20-V range. Bypass with CVBUS to GND."+ },+ {+ "number": "28",+ "name": "GND",+ "type": "power_in",+ "description": "Ground. Connect to ground plane."+ },+ {+ "number": "29",+ "name": "GND",+ "type": "power_in",+ "description": "Ground. Connect to ground plane."+ },+ {+ "number": "30",+ "name": "RESERVED",+ "type": "input",+ "description": "Reserved. Tie to ground or LDO_3V3."+ },+ {+ "number": "31",+ "name": "PLUG_EVENT",+ "type": "output",+ "description": "Open-drain output. 1 = connection present, 0 = no connection present."+ },+ {+ "number": "32",+ "name": "VIN_3V3",+ "type": "power_in",+ "description": "Supply for core circuitry and I/O (nominal 3.3 V). Bypass with CVIN_3V3 to GND."+ },+ {+ "number": "33",+ "name": "GND",+ "type": "power_in",+ "description": "Exposed thermal pad (GND). Connect to the ground plane for both electrical ground and heat dissipation."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2407041151_Texas-Instruments-TPS25730SRSMR_C22390380.pdf",+ "pages": 71,+ "sha256": "21ea4dc8b4aa380c",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 33,+ "described": 33,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Texas Instruments",+ "Package": "VQFN-32-EP(4x4)",+ "Category": "Power Management (PMIC)",+ "Pins": "33"+ }+ },+ "variants": [+ {+ "mpn": "TPS25730SRSMR",+ "kind": "packaging"+ },+ {+ "mpn": "TPS25730SRSMRDRFR",+ "kind": "packaging"+ },+ {+ "mpn": "TPS25730SRSMRD",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "tps25730srsmr"+ ],+ "discovery_pitch": "TPS25730SRSMR (Texas Instruments) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +302,5 @@ "docs/tps25730srsmr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }