component
TPS2553DRVT-1
Public Made by Adomby adom
Texas Instruments Power Distribution Switches, WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS2553DRVT-1
Texas Instruments · Power Distribution Switches · WSON-6-EP(2x2)
TPS2553DRVT-1 from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Switched power output delivering up to 1.5 A continuous load current with absolute voltage range -0.3 V to 7 V. |
| 2 | ILIM | output | Current output for setting current-limit threshold; connect external resistor (15 kΩ to 232 kΩ recommended) to set 75 mA to 1.7 A current limit. |
| 3 | FAULT | tri_state | Active-low open-drain output asserts during overcurrent (7.5-ms deglitch typical), overtemperature (immediate), or reverse-voltage (4-ms deglitch typical) faults; 10 mA maximum continuous sink current. |
| 4 | EN | input | Active-high enable input; logic high activates power switch with threshold range 0.66 V to 1.1 V and ±0.5 µA maximum leakage current. |
| 5 | GND | power_in | Ground reference connection; must be connected externally to PowerPAD for proper thermal management and heat sinking. |
| 6 | IN | power_in | Power supply input with operating range 2.5 V to 6.5 V; requires 0.1 µF minimum ceramic bypass capacitor connected as close as possible to ground. |
| 7 | PAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 7 |
CAD (KiCad official)
- Symbol:
TPS2553DRVT-1 - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps2553drvt-1-etched.step/tps2553drvt-1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps2553drvt-1.step/tps2553drvt-1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (44 pp, sha256
88e453700cea2b26, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).