component
TPS25200DRVT
Public Made by Adomby adom
Texas Instruments Surge Protection Devices (SPDs), WSON-6(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# TPS25200DRVT++**Texas Instruments** · Surge Protection Devices (SPDs) · WSON-6(2x2)++TPS25200DRVT from Texas Instruments, in a WSON-6(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OUT | power_out | Protected power-switch output; continuous load current up to 2.6 A; output clamped to 5.25 V-5.55 V when VIN exceeds the OVC threshold; 480 Ω (typ) active discharge to GND when disabled or in UVLO/OVLO. |+| 2 | ILIM | output | Current-limit set pin; TPS25200 regulates a voltage on this pin so that the resistor RILIM connected from ILIM to GND programs the overcurrent threshold IOS; recommended range 33 kΩ ≤ RILIM ≤ 1100 kΩ (85 mA to 2.9 A typ); max continuous pull-up current 150 µA. |+| 3 | FAULT | output | Active-low open-drain fault flag; asserted during overcurrent (with 5 ms-12 ms deglitch), overvoltage lock-out, or overtemperature events; VOL ≤ 180 mV at IFAULT = 1 mA; off-state leakage ≤ 1 µA at VFAULT = 6.5 V; connect pull-up resistor to logic I/O supply rail. |+| 4 | EN | input | Active-high logic enable input; turn-on threshold 1.9 V (typ, rising), turn-off threshold 0.6 V (typ, falling), 330 mV hysteresis; TTL/CMOS compatible up to 6.5 V; leakage ±2 µA; pin must not be left floating. |+| 5 | GND | power_in | Ground reference for all signals; must be externally connected to the PowerPAD (pad 7) for correct operation. |+| 6 | IN | power_in | Supply voltage input; operating range 2.5 V to 6.5 V, withstands up to 20 V DC; UVLO threshold 2.35 V-2.45 V (rising); OVLO shutdown 6.8 V-8.45 V (rising, 7.6 V typ); place 0.1 µF or larger ceramic bypass capacitor from IN to GND as close to the device as possible. |+| 7 | PowerPAD | power_in | Exposed bottom thermal pad; internally connected to GND; must be soldered to the PCB ground plane for thermal and mechanical performance; θJCbot = 7.6 °C/W. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WSON-6(2x2) |+| Category | Circuit Protection |+| Pins | 7 |++## CAD (KiCad official)++- Symbol: `TPS25200DRVT`+- Footprint: `Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm`+- 3D model: WSON-6(2x2) (KiCad packages3D, STEP)+- 3D model files: `tps25200drvt-etched.step` / `tps25200drvt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps25200drvt.step` / `tps25200drvt.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps25200) (31 pp, sha256 `85d7090e98fc7d4b`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps25200drvt-datasheet.pdf)
page.jsonadded+153@@ -0,0 +1,153 @@+{+ "slug": "tps25200drvt",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Surge Protection Devices (SPDs), WSON-6(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "circuit protection",+ "tps25200drvt",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps25200drvt.kicad_sym",+ "tps25200drvt.kicad_mod",+ "tps25200drvt.glb",+ "tps25200drvt.step",+ "tps25200drvt.lbr",+ "docs/hero.png",+ "docs/tps25200drvt-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS25200DRVT",+ "manufacturer": "Texas Instruments",+ "package": "WSON-6(2x2)",+ "pin_count": 7,+ "category": "Circuit Protection",+ "subcategory": "Surge Protection Devices (SPDs)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps25200",+ "parts": {+ "symbol": "tps25200drvt.kicad_sym",+ "footprint": "tps25200drvt.kicad_mod",+ "model_3d": "tps25200drvt-etched.glb",+ "model_3d_plain": "tps25200drvt.glb",+ "model_3d_step": "tps25200drvt-etched.step",+ "model_3d_step_plain": "tps25200drvt.step",+ "lbr": "tps25200drvt.lbr"+ },+ "distributor_links": {+ "lcsc": "C2653855",+ "digikey": "296-37760-2-ND",+ "mouser": "595-TPS25200DRVT"+ },+ "distributor_check": {+ "checked_at": "2026-09-27T05:02:08Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-37760-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS25200DRVT",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "OUT",+ "type": "power_out",+ "description": "Protected power-switch output; continuous load current up to 2.6 A; output clamped to 5.25 V-5.55 V when VIN exceeds the OVC threshold; 480 Ω (typ) active discharge to GND when disabled or in UVLO/OVLO."+ },+ {+ "number": "2",+ "name": "ILIM",+ "type": "output",+ "description": "Current-limit set pin; TPS25200 regulates a voltage on this pin so that the resistor RILIM connected from ILIM to GND programs the overcurrent threshold IOS; recommended range 33 kΩ ≤ RILIM ≤ 1100 kΩ (85 mA to 2.9 A typ); max continuous pull-up current 150 µA."+ },+ {+ "number": "3",+ "name": "FAULT",+ "type": "output",+ "description": "Active-low open-drain fault flag; asserted during overcurrent (with 5 ms-12 ms deglitch), overvoltage lock-out, or overtemperature events; VOL ≤ 180 mV at IFAULT = 1 mA; off-state leakage ≤ 1 µA at VFAULT = 6.5 V; connect pull-up resistor to logic I/O supply rail."+ },+ {+ "number": "4",+ "name": "EN",+ "type": "input",+ "description": "Active-high logic enable input; turn-on threshold 1.9 V (typ, rising), turn-off threshold 0.6 V (typ, falling), 330 mV hysteresis; TTL/CMOS compatible up to 6.5 V; leakage ±2 µA; pin must not be left floating."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for all signals; must be externally connected to the PowerPAD (pad 7) for correct operation."+ },+ {+ "number": "6",+ "name": "IN",+ "type": "power_in",+ "description": "Supply voltage input; operating range 2.5 V to 6.5 V, withstands up to 20 V DC; UVLO threshold 2.35 V-2.45 V (rising); OVLO shutdown 6.8 V-8.45 V (rising, 7.6 V typ); place 0.1 µF or larger ceramic bypass capacitor from IN to GND as close to the device as possible."+ },+ {+ "number": "7",+ "name": "PowerPAD",+ "type": "power_in",+ "description": "Exposed bottom thermal pad; internally connected to GND; must be soldered to the PCB ground plane for thermal and mechanical performance; θJCbot = 7.6 °C/W."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 7 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 31,+ "cost_usd": 0.3044,+ "at": "2026-09-27T05:01:52"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps25200",+ "pages": 31,+ "sha256": "85d7090e98fc7d4b",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 7,+ "described": 7,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}