component
TPS25200DRVT
Public Made by Adomby adom
Texas Instruments Surge Protection Devices (SPDs), WSON-6(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -53,25 +53,25 @@ "number": "1", "name": "OUT", "type": "power_out",- "description": "Protected power-switch output; continuous load current up to 2.6 A; output clamped to 5.25 V-5.55 V when VIN exceeds the OVC threshold; 480 \u03a9 (typ) active discharge to GND when disabled or in UVLO/OVLO."+ "description": "Protected power-switch output; continuous load current up to 2.6 A; output clamped to 5.25 V-5.55 V when VIN exceeds the OVC threshold; 480 Ω (typ) active discharge to GND when disabled or in UVLO/OVLO." }, { "number": "2", "name": "ILIM", "type": "output",- "description": "Current-limit set pin; TPS25200 regulates a voltage on this pin so that the resistor RILIM connected from ILIM to GND programs the overcurrent threshold IOS; recommended range 33 k\u03a9 \u2264 RILIM \u2264 1100 k\u03a9 (85 mA to 2.9 A typ); max continuous pull-up current 150 \u00b5A."+ "description": "Current-limit set pin; TPS25200 regulates a voltage on this pin so that the resistor RILIM connected from ILIM to GND programs the overcurrent threshold IOS; recommended range 33 kΩ ≤ RILIM ≤ 1100 kΩ (85 mA to 2.9 A typ); max continuous pull-up current 150 µA." }, { "number": "3", "name": "FAULT", "type": "output",- "description": "Active-low open-drain fault flag; asserted during overcurrent (with 5 ms-12 ms deglitch), overvoltage lock-out, or overtemperature events; VOL \u2264 180 mV at IFAULT = 1 mA; off-state leakage \u2264 1 \u00b5A at VFAULT = 6.5 V; connect pull-up resistor to logic I/O supply rail."+ "description": "Active-low open-drain fault flag; asserted during overcurrent (with 5 ms-12 ms deglitch), overvoltage lock-out, or overtemperature events; VOL ≤ 180 mV at IFAULT = 1 mA; off-state leakage ≤ 1 µA at VFAULT = 6.5 V; connect pull-up resistor to logic I/O supply rail." }, { "number": "4", "name": "EN", "type": "input",- "description": "Active-high logic enable input; turn-on threshold 1.9 V (typ, rising), turn-off threshold 0.6 V (typ, falling), 330 mV hysteresis; TTL/CMOS compatible up to 6.5 V; leakage \u00b12 \u00b5A; pin must not be left floating."+ "description": "Active-high logic enable input; turn-on threshold 1.9 V (typ, rising), turn-off threshold 0.6 V (typ, falling), 330 mV hysteresis; TTL/CMOS compatible up to 6.5 V; leakage ±2 µA; pin must not be left floating." }, { "number": "5",@@ -83,13 +83,13 @@ "number": "6", "name": "IN", "type": "power_in",- "description": "Supply voltage input; operating range 2.5 V to 6.5 V, withstands up to 20 V DC; UVLO threshold 2.35 V-2.45 V (rising); OVLO shutdown 6.8 V-8.45 V (rising, 7.6 V typ); place 0.1 \u00b5F or larger ceramic bypass capacitor from IN to GND as close to the device as possible."+ "description": "Supply voltage input; operating range 2.5 V to 6.5 V, withstands up to 20 V DC; UVLO threshold 2.35 V-2.45 V (rising); OVLO shutdown 6.8 V-8.45 V (rising, 7.6 V typ); place 0.1 µF or larger ceramic bypass capacitor from IN to GND as close to the device as possible." }, { "number": "7", "name": "PowerPAD", "type": "power_in",- "description": "Exposed bottom thermal pad; internally connected to GND; must be soldered to the PCB ground plane for thermal and mechanical performance; \u03b8JCbot = 7.6 \u00b0C/W."+ "description": "Exposed bottom thermal pad; internally connected to GND; must be soldered to the PCB ground plane for thermal and mechanical performance; θJCbot = 7.6 °C/W." } ], "provenance": {@@ -170,5 +170,8 @@ "docs/tps25200drvt-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }