main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tps2511dgnr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers tps2511dgnr: viewers · Ray
package.json tps2511dgnr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json tps2511dgnr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/tps2511dgnr · Ray
tps2511dgnr-etched.fit.json tps2511dgnr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps2511dgnr-etched.glb tps2511dgnr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps2511dgnr-etched.step tps2511dgnr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tps2511dgnr.glb Publish 0.1.0 · Ray
tps2511dgnr.kicad_mod Publish 0.1.0 · Ray
tps2511dgnr.kicad_sym Publish 0.1.0 · Ray
tps2511dgnr.lbr Publish 0.1.0 · Ray
tps2511dgnr.step Publish 0.1.0 · Ray

TPS2511DGNR

Texas Instruments · Power Distribution Switches · MSOP-8-EP

TPS2511DGNR from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground connection.
2 ILIM_SET input External resistor used to set current limiting Threshold; TI recommends 16.9 kΩ ≤ RILIM_SET ≤ 750 kΩ.
3 IN power_in Power supply input voltage connected to the power switch; connect a ceramic capacitor with a value of 0.1-µF or greater from IN pin to GND as close to the device as possible.
4 CS tri_state Active-low, open-drain output; asserted when OUT current exceeds approximately half of current limit set by ILIM_SET; maximum sink current is 10 mA.
5 EN input Logic-level control input that enables power switch when high and disables it when low, placing DP and DM into high impedance state when low.
6 DP bidirectional Connected to D+ or D- line of USB connector to provide correct voltage for DCP detection; driven to high impedance when device is disabled.
7 DM bidirectional Connected to D- or D+ line of USB connector to provide correct voltage for DCP detection; driven to high impedance when device is disabled.
8 OUT output Power-switch output connected to VBUS of USB connector.
9 PAD passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-8-EP
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: TPS2511DGNR
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: tps2511dgnr-etched.step / tps2511dgnr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps2511dgnr.step / tps2511dgnr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 44a6357c4806dd4b, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF