← Commit history

Initial commit: component/tps2511dgnr

Ray ·4ad911107b ·
2 files changed +210
README.mdadded+46
@@ -0,0 +1,46 @@+# TPS2511DGNR++**Texas Instruments** · Power Distribution Switches · MSOP-8-EP++TPS2511DGNR from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground connection. |+| 2 | ILIM_SET | input | External resistor used to set current limiting Threshold; TI recommends 16.9 kΩ ≤ RILIM_SET ≤ 750 kΩ. |+| 3 | IN | power_in | Power supply input voltage connected to the power switch; connect a ceramic capacitor with a value of 0.1-µF or greater from IN pin to GND as close to the device as possible. |+| 4 | CS | tri_state | Active-low, open-drain output; asserted when OUT current exceeds approximately half of current limit set by ILIM_SET; maximum sink current is 10 mA. |+| 5 | EN | input | Logic-level control input that enables power switch when high and disables it when low, placing DP and DM into high impedance state when low. |+| 6 | DP | bidirectional | Connected to D+ or D- line of USB connector to provide correct voltage for DCP detection; driven to high impedance when device is disabled. |+| 7 | DM | bidirectional | Connected to D- or D+ line of USB connector to provide correct voltage for DCP detection; driven to high impedance when device is disabled. |+| 8 | OUT | output | Power-switch output connected to VBUS of USB connector. |+| 9 | PAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-8-EP |+| Category | Power Management (PMIC) |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `TPS2511DGNR`+- Footprint: `Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm`+- 3D model: MSOP-8-EP (KiCad packages3D, STEP)+- 3D model files: `tps2511dgnr-etched.step` / `tps2511dgnr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps2511dgnr.step` / `tps2511dgnr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps2511) (34 pp, sha256 `44a6357c4806dd4b`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps2511dgnr-datasheet.pdf)
page.jsonadded+164
@@ -0,0 +1,164 @@+{+  "slug": "tps2511dgnr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Power Distribution Switches, MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps2511dgnr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps2511dgnr.kicad_sym",+    "tps2511dgnr.kicad_mod",+    "tps2511dgnr.glb",+    "tps2511dgnr.step",+    "tps2511dgnr.lbr",+    "docs/hero.png",+    "docs/tps2511dgnr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS2511DGNR",+    "manufacturer": "Texas Instruments",+    "package": "MSOP-8-EP",+    "pin_count": 9,+    "category": "Power Management (PMIC)",+    "subcategory": "Power Distribution Switches",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps2511",+    "parts": {+      "symbol": "tps2511dgnr.kicad_sym",+      "footprint": "tps2511dgnr.kicad_mod",+      "model_3d": "tps2511dgnr-etched.glb",+      "model_3d_plain": "tps2511dgnr.glb",+      "model_3d_step": "tps2511dgnr-etched.step",+      "model_3d_step_plain": "tps2511dgnr.step",+      "lbr": "tps2511dgnr.lbr"+    },+    "distributor_links": {+      "lcsc": "C68648",+      "digikey": "296-30552-2-ND",+      "mouser": "595-TPS2511DGNR"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T13:28:07Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-30552-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-TPS2511DGNR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection."+      },+      {+        "number": "2",+        "name": "ILIM_SET",+        "type": "input",+        "description": "External resistor used to set current limiting Threshold; TI recommends 16.9 kΩ ≤ RILIM_SET ≤ 750 kΩ."+      },+      {+        "number": "3",+        "name": "IN",+        "type": "power_in",+        "description": "Power supply input voltage connected to the power switch; connect a ceramic capacitor with a value of 0.1-µF or greater from IN pin to GND as close to the device as possible."+      },+      {+        "number": "4",+        "name": "CS",+        "type": "tri_state",+        "description": "Active-low, open-drain output; asserted when OUT current exceeds approximately half of current limit set by ILIM_SET; maximum sink current is 10 mA."+      },+      {+        "number": "5",+        "name": "EN",+        "type": "input",+        "description": "Logic-level control input that enables power switch when high and disables it when low, placing DP and DM into high impedance state when low."+      },+      {+        "number": "6",+        "name": "DP",+        "type": "bidirectional",+        "description": "Connected to D+ or D- line of USB connector to provide correct voltage for DCP detection; driven to high impedance when device is disabled."+      },+      {+        "number": "7",+        "name": "DM",+        "type": "bidirectional",+        "description": "Connected to D- or D+ line of USB connector to provide correct voltage for DCP detection; driven to high impedance when device is disabled."+      },+      {+        "number": "8",+        "name": "OUT",+        "type": "output",+        "description": "Power-switch output connected to VBUS of USB connector."+      },+      {+        "number": "9",+        "name": "PAD",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Exposed thermal pad (PowerPAD) listed in pin table without numeric designation—datasheet labels it a",+          "exposed pad 9 added from the footprint"+        ],+        "pages_sent": 34,+        "cost_usd": 0.322,+        "at": "2026-09-27T13:27:51"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps2511",+        "pages": 34,+        "sha256": "44a6357c4806dd4b",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 9,+        "described": 9,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file