TPS24713DGSR

{
  "slug": "tps24713dgsr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Monitors & Reset Circuits, VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "tps24713dgsr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps24713dgsr.kicad_sym",
    "tps24713dgsr.kicad_mod",
    "tps24713dgsr.glb",
    "tps24713dgsr.step",
    "tps24713dgsr.lbr",
    "docs/hero.png",
    "docs/tps24713dgsr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps24713dgsr-hero.glb",
    "tps24713dgsr-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS24713DGSR",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-10-0.5mm",
    "pin_count": 10,
    "category": "Power Supply Chip",
    "subcategory": "Monitors & Reset Circuits",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps24713",
    "parts": {
      "symbol": "tps24713dgsr.kicad_sym",
      "footprint": "tps24713dgsr.kicad_mod",
      "model_3d": "tps24713dgsr-hero.glb",
      "model_3d_plain": "tps24713dgsr.glb",
      "model_3d_step": "tps24713dgsr-etched.step",
      "model_3d_step_plain": "tps24713dgsr.step",
      "lbr": "tps24713dgsr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2653586",
      "digikey": "296-28564-2-ND",
      "mouser": "595-TPS24713DGSR"
    },
    "distributor_check": {
      "checked_at": "2026-10-09T02:43:33Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-28564-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS24713DGSR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PG",
        "type": "output",
        "description": "Active-high open-drain power-good output for the TPS24713 that goes high-impedance after the FET VDS falls below 170 mV and a 3.4-ms deglitch delay elapses, and pulls low when VDS exceeds 240 mV."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Active-high enable input; applying 1.35 V or more enables the gate driver, and the pin should not be left floating."
      },
      {
        "number": "3",
        "name": "PROG",
        "type": "input",
        "description": "Power-limit programming pin: a resistor from this pin to GND sets the maximum MOSFET power during inrush, no voltage should be applied to it, and 4.99 kΩ is used when no constant power limit is wanted (recommended resistance 4.99 kΩ to 500 kΩ)."
      },
      {
        "number": "4",
        "name": "TIMER",
        "type": "bidirectional",
        "description": "A capacitor from this pin to GND provides the fault timing function, with absolute maximum input range of -0.3 V to 5 V."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "System ground connection."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "input",
        "description": "Output voltage sensor that measures the drain-to-source voltage of the external MOSFET; recommended input range is 0 V to 18 V, with an absolute maximum of 30 V."
      },
      {
        "number": "7",
        "name": "GATE",
        "type": "output",
        "description": "Gate driver output for the external MOSFET; a charge pump sources 30 µA and a 13.9-V clamp between GATE and VCC limits gate-to-source voltage."
      },
      {
        "number": "8",
        "name": "SENSE",
        "type": "input",
        "description": "Current-sense input for the shunt resistor between VCC and SENSE; recommended input range is 2.5 V to 18 V."
      },
      {
        "number": "9",
        "name": "VCC",
        "type": "power_in",
        "description": "Input-voltage sense and power supply; recommended input range is 2.5 V to 18 V."
      },
      {
        "number": "10",
        "name": "FLT",
        "type": "output",
        "description": "Active-high open-drain fault output for the TPS24713 that goes high-impedance when the fault timer expires and the MOSFET is disabled in retry mode; recommended sink current is 0 to 2 mA."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin-to-function mapping for TPS24713 taken from the Pin Functions table on page 4 (TPS24712/13 colum; The text gives VSSOP (DGS) 10-pin, but does not state the 0.5 mm lead pitch named in the package hin; Pin types use the datasheet's I/O classes mapped to KiCad: VCC and SENSE listed as 'I' in the table "
        ],
        "pages_sent": 12,
        "cost_usd": 0.0742,
        "at": "2026-10-09T02:43:20"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps24713",
        "pages": 40,
        "sha256": "3470149f6e5539ab",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps24713dgsr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-09",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps24713dgsr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "eaa48acc90b57b4f05cf1240532159a893a6cc013639d6d7ed6e56da24ed0592",
        "checked": "2026-10-09",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}