Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TPS2421-1DDA

Texas Instruments · Supervisor And Reset ICs · SO-8

TPS2421-1DDA from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FLT output Fault low indicated the fault time has expired and the FET is switched off
2 EN input Device is enabled when this pin is pulled low
3 VIN power_in Power In and control supply voltage
4 GND power_in GND
5 ISET bidirectional A resistor to ground sets the fault current, the current limit is 150% of the fault current
6 CT bidirectional A capacitor to ground sets the fault time
7 VOUT output Output to the load
8 PG output Power Good low represents the output voltage is within 300 mV of the input voltage

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SO-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: TPS2421-1DDA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: tps2421-1dda-etched.step / tps2421-1dda-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps2421-1dda.step / tps2421-1dda.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 ab2cf03f01620f54, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF