component
TPS2375PWR-1
Public Made by Adomby adom
Texas Instruments Power Over Ethernet (PoE) Controllers, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS2375PWR-1
Texas Instruments · Power Over Ethernet (PoE) Controllers · TSSOP-8
TPS2375PWR-1 from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ILIM | output | Connect resistor from ILIM to VSS to program inrush current limit; practical range 62.5 kΩ to 500 kΩ with 178 kΩ recommended for legacy PSE compatibility. |
| 2 | CLASS | output | Connect resistor from CLASS to VSS to set powered device classification; IEEE 802.3af range 255 Ω to 4420 Ω per Table 1. |
| 3 | DET | output | Connect 24.9-kΩ ±1% detection resistor from DET to VDD for valid power device detection. |
| 4 | VSS | power_in | Input supply negative rail and reference ground. |
| 5 | RTN | power_in | Switched negative power output rail for downstream circuits with sink current 0-350 mA controlled by internal current limiter. |
| 6 | PG | tri_state | Open-drain power-good output; high impedance when device enabled and not in inrush limiting, pulled to RTN otherwise. |
| 7 | NC | unconnected | No connection. |
| 8 | VDD | power_in | Positive input supply 0-57 V from rectified PSE providing device operating power and voltage monitoring. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
TPS2375PWR-1 - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tps2375pwr-1-etched.step/tps2375pwr-1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps2375pwr-1.step/tps2375pwr-1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
a836902081e47247, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).