component
TPS22953DSQR
Public Made by Adomby adom
Texas Instruments Power Distribution Switches, WSON-10-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/tps22953dsqr
1cdba6c
TPS22953DSQR
Texas Instruments · Power Distribution Switches · WSON-10-EP(2x2)
TPS22953DSQR from Texas Instruments, in a WSON-10-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Switch input; bypass to GND with ceramic capacitor. |
| 2 | IN | input | Switch input; bypass to GND with ceramic capacitor. |
| 3 | BIAS | power_in | Bias and power supply pin for the device operating range 2.5V to 5.7V. |
| 4 | EN | input | Active-high switch enable/disable and input UVLO pin; configure with external resistor divider and do not leave floating. |
| 5 | GND | power_in | Device ground. |
| 6 | CT | output | Slew rate control pin; add ceramic capacitor from CT to GND to control VOUT rise time and limit inrush current (25V minimum rated capacitor). |
| 7 | PG | tri_state | Open-drain power good output that pulls low when EN or SNS voltage falls below their respective VIL threshold. |
| 8 | SNS | input | Sense pin for voltage monitoring; configure with external resistor divider and do not leave floating. |
| 9 | OUT | output | Switch output. |
| 10 | OUT | output | Switch output. |
| 11 | PAD | power_in | Exposed thermal pad; tie to GND for thermal and mechanical performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
TPS22953DSQR - Footprint:
Package_DFN_QFN:Texas_DSQ0010A_WSON-10-1EP_2x2mm_P0.4mm_EP0.9x1.5mm - 3D model: WSON-10-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tps22953dsqr-etched.step/tps22953dsqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps22953dsqr.step/tps22953dsqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
1604bced1d3c2178, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TPS22953DSQR
**Texas Instruments** · Power Distribution Switches · WSON-10-EP(2x2)
TPS22953DSQR from Texas Instruments, in a WSON-10-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Switch input; bypass to GND with ceramic capacitor. |
| 2 | IN | input | Switch input; bypass to GND with ceramic capacitor. |
| 3 | BIAS | power_in | Bias and power supply pin for the device operating range 2.5V to 5.7V. |
| 4 | EN | input | Active-high switch enable/disable and input UVLO pin; configure with external resistor divider and do not leave floating. |
| 5 | GND | power_in | Device ground. |
| 6 | CT | output | Slew rate control pin; add ceramic capacitor from CT to GND to control VOUT rise time and limit inrush current (25V minimum rated capacitor). |
| 7 | PG | tri_state | Open-drain power good output that pulls low when EN or SNS voltage falls below their respective VIL threshold. |
| 8 | SNS | input | Sense pin for voltage monitoring; configure with external resistor divider and do not leave floating. |
| 9 | OUT | output | Switch output. |
| 10 | OUT | output | Switch output. |
| 11 | PAD | power_in | Exposed thermal pad; tie to GND for thermal and mechanical performance. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 11 |
## CAD (KiCad official)
- Symbol: `TPS22953DSQR`
- Footprint: `Package_DFN_QFN:Texas_DSQ0010A_WSON-10-1EP_2x2mm_P0.4mm_EP0.9x1.5mm`
- 3D model: WSON-10-EP(2x2) (KiCad packages3D, STEP)
- 3D model files: `tps22953dsqr-etched.step` / `tps22953dsqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps22953dsqr.step` / `tps22953dsqr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps22954) (47 pp, sha256 `1604bced1d3c2178`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tps22953dsqr-datasheet.pdf)