Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS22953DQCR

Texas Instruments · Global Sourcing Parts · WSON-10-EP(2x3)

TPS22953DQCR from Texas Instruments, in a WSON-10-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Switch input; bypass with ceramic capacitor to GND.
2 IN power_in Switch input; bypass with ceramic capacitor to GND.
3 BIAS power_in Bias and device power supply operating from 2.5 V to 5.7 V.
4 EN input Enable input and UVLO monitor; use external resistor divider to set UVLO threshold; do not leave floating.
5 GND power_in Device ground.
6 CT output Slew rate control pin; connect ceramic capacitor (minimum 25 V rating) from CT to GND to limit inrush current and control VOUT rise time.
7 PG tri_state Open-drain power good output; pulled low when EN or SNS voltage is below respective threshold.
8 SNS input Sense input for voltage monitoring; use external resistor divider to set power good threshold; do not leave floating.
9 OUT power_out Load switch output carrying up to 5 A continuous current.
10 OUT power_out Load switch output carrying up to 5 A continuous current.
11 Thermal Pad power_in Exposed thermal pad; solder to GND for thermal performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-10-EP(2x3)
Category Global Sourcing Parts
Pins 11

CAD (KiCad official)

  • Symbol: TPS22953DQCR
  • Footprint: Package_SON:WSON-10-1EP_2x3mm_P0.5mm_EP0.84x2.4mm
  • 3D model: WSON-10-EP(2x3) (KiCad packages3D, STEP)
  • 3D model files: tps22953dqcr-etched.step / tps22953dqcr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps22953dqcr.step / tps22953dqcr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 1604bced1d3c2178, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF