Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

main

Generated by kicad-footprint-generator · KiCad file format 20260206

Name	Last commit message	Last updated
docs	tps22918: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray	1mo ago
viewers	viewers · Ray	2mo ago
package.json	Publish 0.1.0 · Ray	2mo ago
page.json	tps22918: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray	1mo ago
README.md	tps22918: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray	1mo ago
tps22918-etched.fit.json	tps22918: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray	1mo ago
tps22918-etched.glb	tps22918: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray	1mo ago
tps22918-etched.step	tps22918: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray	1mo ago
TPS22918.adom-lbr.json	TPS22918: validated Fusion/EAGLE library + adom-lbr hub, generated from this page's KiCad sources · Ray	2mo ago
tps22918.glb	Publish 0.1.0 · Ray	2mo ago
tps22918.kicad_mod	Publish 0.1.0 · Ray	2mo ago
tps22918.kicad_sym	Publish 0.1.0 · Ray	2mo ago
tps22918.lbr	add validated EAGLE .lbr (Fusion library) · Ray	2mo ago
TPS22918.lbr	TPS22918: validated Fusion/EAGLE library + adom-lbr hub, generated from this page's KiCad sources · Ray	2mo ago
tps22918.step	add .step (Fusion 3D source) · Ray	2mo ago

TPS22918

Texas Instruments · Load switch · SOT-23-6

Single-channel load switch with an integrated N-channel MOSFET, in a SOT-23-6 package. It connects VIN to VOUT under an active-high ON control, from a 1 to 5.5 V rail at up to 2 A, with a low on-resistance. An external capacitor on CT sets the output slew rate to tame inrush, and QOD gives a controlled quick output discharge when the switch turns off. The clean way to sequence and hot-swap power rails to sub-circuits.

Pinout

Pin	Name	Type	Function
1	VIN	power_in	Switch input, 1 V to 5.5 V. Place ceramic bypass capacitor(s) (>=1 uF recommended) between this pin and GND. Absolute max 6 V.
2	GND	power_in	Device ground reference.
3	ON	input	Active-high switch control input. VIH >= 1 V, VIL <= 0.5 V (VIN = 1 to 5.5 V). Low-voltage compatible (1 V or higher GPIO). Do not leave floating.
4	CT	passive	Switch slew-rate (rise-time) control. Connect an external capacitor to GND to program the rise time; may be left floating for the default rise time.
5	QOD	passive	Quick Output Discharge pin. Configure by placing an external resistor between VOUT and QOD, tying QOD directly to VOUT to use the internal pull-down (RPD ~24-45 Ohm depending on VIN), or leaving floating to disable QOD.
6	VOUT	power_out	Switch output. Connected to VIN through the internal N-channel MOSFET (RON ~52 mOhm typ at VIN = 5 V; 53 mOhm typ at VIN = 3.3 V). Supports up to 2 A continuous.

Key specifications

Parameter	Value
Type	Single-channel load switch (integrated N-FET)
Input voltage	1-5.5 V
Output current	up to 2 A
Control	ON (active-high)
Slew-rate control	CT pin (external cap sets rise time)
Output discharge	QOD (quick output discharge)
Package	SOT-23-6
Body (L×W×H)	2.9 × 1.6 × 1.1 mm

Ordering variants

Same part, different packaging or reel option.

TPS22918DBVR (SOT-23-6, tape & reel)

CAD (KiCad official)

Symbol: TPS22918 (Adom-authored grouped symbol via adom-symbol; not in KiCad libs)
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: SOT-23-6 (KiCad packages3D)
3D model files: tps22918-etched.step / tps22918-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps22918.step / tps22918.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (30 pp, sha256 1b28eb58003d28b1, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude) — every pin and dimension is cited to a datasheet page; refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF