component
TPS2141IPWPR
Public Made by Adomby adom
Texas Instruments Power Distribution Switches, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 14h ago |
| viewers | 14h ago |
| package.json | 14h ago |
| page.json | 14h ago |
| README.md | 14h ago |
| tps2141ipwpr-etched.glb | 14h ago |
| tps2141ipwpr-etched.step | 14h ago |
| tps2141ipwpr-hero.glb | 14h ago |
| tps2141ipwpr-hero.overlay.json | 14h ago |
| tps2141ipwpr.glb | 14h ago |
| tps2141ipwpr.kicad_mod | 14h ago |
| tps2141ipwpr.kicad_sym | 14h ago |
| tps2141ipwpr.lbr | 14h ago |
| tps2141ipwpr.step | 14h ago |
TPS2141IPWPR
Texas Instruments · Power Distribution Switches · HTSSOP-14-EP
TPS2141IPWPR from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW_PG | output | Power good signal for switch output, active high logic-level signal with no external pullup required. |
| 2 | SW_IN | power_in | Input to integrated N-channel MOSFET power switch, 2.7 V to 5.5 V supply voltage, 65 mΩ maximum on-state resistance. |
| 3 | SW_IN | power_in | Input to integrated N-channel MOSFET power switch, 2.7 V to 5.5 V supply voltage, 65 mΩ maximum on-state resistance. |
| 4 | LDO_IN | power_in | Input to LDO regulator, 2.7 V to 5.5 V supply voltage range. |
| 5 | SW_EN | input | Active-low enable signal for power switch on TPS2141 with internal pullup. |
| 6 | LDO_EN | input | Enable signal for LDO regulator, active high, no internal pullup or pulldown. |
| 7 | GND | power_in | Ground. |
| 8 | LDO_PG | output | Power good signal for LDO output, open-drain, active high. |
| 9 | ADJ | input | Feedback adjustment pin for LDO regulator to set output voltage from 0.9 V to 3.3 V adjustable. |
| 10 | LDO_PLDN | output | Open-drain output pulldown pin for LDO when connected to LDO_OUT to reduce fall time. |
| 11 | LDO_OUT | power_out | Output of LDO regulator, 250 mA continuous current, 0.5 V maximum dropout voltage, 0.9 V to 3.3 V adjustable. |
| 12 | SW_OUT | power_out | Output of switch, 500 mA continuous current rating with dual current limit, 100 mA initial and 1800 mA after 93% voltage rise. |
| 13 | SW_OUT | power_out | Output of switch, 500 mA continuous current rating with dual current limit, 100 mA initial and 1800 mA after 93% voltage rise. |
| 14 | SW_PLDN | output | Open-drain output pulldown pin for switch when connected to SW_OUT to reduce fall time. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Supply Chip |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
TPS2141IPWPR - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files:
tps2141ipwpr-etched.step/tps2141ipwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps2141ipwpr.step/tps2141ipwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
8316b929dcdd03f1, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).