Open general

Both VOUT pins (2, 7) are power_out: KiCad ERC errors whenever they are joined, as the datasheet requires

noah ·

What happens. In tps2116drlr.kicad_sym both VOUT pins (2 and 7) are power_out. The datasheet says to connect both (one output, two pins), so every schematic that does gets a KiCad ERC error:

Pins of type Power output and Power output are connected: Symbol U1 Pin 2 [VOUT, Power output, Line], Symbol U1 Pin 7 [VOUT, Power output, Line]

adom-aiflow schematic check then also flags any local workaround (pin 7 made passive) as "output VOUT is passive", so a board cannot be clean on both checks with the page symbol as it is.

Suggested fix. The usual KiCad pattern for a doubled power pin: keep pin 2 power_out and make pin 7 power_out + (hide yes) stacked on pin 2, or give pin 7 type passive and document it. Either way ERC passes with both pins wired.

Workaround in use. noah/probing-test-board makes pin 7 passive in its project copy and records spec.schematic.allowPassive for U1 pin 7 with the reason.

Environment. KiCad 10.0.6 kicad-cli ERC (container), adom-aiflow 0.2.56+noah.1, page cloned 2026-11-16.

0 Replies

Log in to reply.