TPS2062DR-1

{
  "slug": "tps2062dr-1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Power Distribution Switches, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "tps2062dr-1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps2062dr-1.kicad_sym",
    "tps2062dr-1.kicad_mod",
    "tps2062dr-1.glb",
    "tps2062dr-1.step",
    "tps2062dr-1.lbr",
    "docs/hero.png",
    "docs/tps2062dr-1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "tps2062dr-1-hero.glb",
    "tps2062dr-1-hero.overlay.json"
  ],
  "component": {
    "mpn": "TPS2062DR-1",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps2066-1",
    "parts": {
      "symbol": "tps2062dr-1.kicad_sym",
      "footprint": "tps2062dr-1.kicad_mod",
      "model_3d": "tps2062dr-1-hero.glb",
      "model_3d_plain": "tps2062dr-1.glb",
      "model_3d_step": "tps2062dr-1-etched.step",
      "model_3d_step_plain": "tps2062dr-1.step",
      "lbr": "tps2062dr-1.lbr"
    },
    "distributor_links": {
      "lcsc": "C2867645",
      "digikey": "296-21658-2-ND",
      "mouser": "595-TPS2062DR-1"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T16:46:15Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-21658-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-TPS2062DR-1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection; all device voltages are specified with respect to this pin."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Input voltage, 2.7 V to 5.5 V recommended; connect a 0.1 µF or greater ceramic capacitor from IN to GND as close to the IC as possible."
      },
      {
        "number": "3",
        "name": "EN1",
        "type": "input",
        "description": "Enable input for channel 1, active-low so that a logic low turns on channel 1; input range 0 V to 5.5 V."
      },
      {
        "number": "4",
        "name": "EN2",
        "type": "input",
        "description": "Enable input for channel 2, active-high so that a logic high turns on channel 2; input range 0 V to 5.5 V."
      },
      {
        "number": "5",
        "name": "OC2",
        "type": "output",
        "description": "Active-low open-drain output asserted during over-current on channel 2; voltage range -0.3 V to 6 V."
      },
      {
        "number": "6",
        "name": "OUT2",
        "type": "power_out",
        "description": "Power-switch output for channel 2; continuous output current 0 to 1 A, internally limited."
      },
      {
        "number": "7",
        "name": "OUT1",
        "type": "power_out",
        "description": "Power-switch output for channel 1; continuous output current 0 to 1 A, internally limited."
      },
      {
        "number": "8",
        "name": "OC1",
        "type": "output",
        "description": "Active-low open-drain output asserted during over-current on channel 1; voltage range -0.3 V to 6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The OC2 row in the page 3 pin table has only two values in the extracted text (\"OC2 5 5 O\") instead ; The page 3 pinout figure is not legible in the extracted text. The pin numbers come from the pin-fun; The datasheet marks IN and OUTx as generic I/O (I/O column). Power classes power_in and power_out we"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0507,
        "at": "2026-10-08T16:45:55"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps2066-1",
        "pages": 43,
        "sha256": "312a9d3c7cfe9d8f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps2062dr-1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps2062dr-1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2a74138da94004f0e65bf90c1ad8f543ab3d8bf6230d755d069d91619ad4efbd",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}