3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS2022DR
Texas Instruments · Power Distribution Switches · SOIC-8
TPS2022DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference; the datasheet states that all voltages are with respect to GND. |
| 2 | IN | power_in | Switch input voltage, with a recommended range of 2.7 V to 5.5 V and an absolute maximum range of -0.3 V to 6 V with respect to GND. |
| 3 | IN | power_in | Switch input voltage, with a recommended range of 2.7 V to 5.5 V and an absolute maximum range of -0.3 V to 6 V with respect to GND. |
| 4 | EN | input | Enable input; logic-low turns on the power switch, with a recommended input range of 0 V to 5.5 V. |
| 5 | OC | output | Active-low overcurrent logic output that is asserted during overcurrent or overtemperature and stays asserted until the condition is removed; VOL is 0.4 V maximum at IO = 10 mA. |
| 6 | OUT | power_out | Power-switch output, delivered through the internal N-channel high-side MOSFET and limited to the short-circuit current threshold in constant-current mode. |
| 7 | OUT | power_out | Power-switch output, delivered through the internal N-channel high-side MOSFET and limited to the short-circuit current threshold in constant-current mode. |
| 8 | OUT | power_out | Power-switch output, delivered through the internal N-channel high-side MOSFET and limited to the short-circuit current threshold in constant-current mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Static drain-source on-state resistance (VI(IN)=5 V, TJ=25°C, IO=1.8 A) | rDS(on) | 33 | 36 | mΩ | VI(IN) = 5 V, TJ = 25°C, IO = 1.8 A | 5 | |
| Static drain-source on-state resistance (VI(IN)=5 V, TJ=85°C, IO=1.8 A) | rDS(on) | 38 | 46 | mΩ | VI(IN) = 5 V, TJ = 85°C, IO = 1.8 A | 5 | |
| Static drain-source on-state resistance (VI(IN)=5 V, TJ=125°C, IO=1.8 A) | rDS(on) | 44 | 50 | mΩ | VI(IN) = 5 V, TJ = 125°C, IO = 1.8 A | 5 | |
| Static drain-source on-state resistance (VI(IN)=3.3 V, TJ=25°C, IO=1.8 A) | rDS(on) | 37 | 41 | mΩ | VI(IN) = 3.3 V, TJ = 25°C, IO = 1.8 A | 5 | |
| Static drain-source on-state resistance (VI(IN)=3.3 V, TJ=85°C, IO=1.8 A) | rDS(on) | 43 | 52 | mΩ | VI(IN) = 3.3 V, TJ = 85°C, IO = 1.8 A | 5 | |
| Static drain-source on-state resistance (VI(IN)=3.3 V, TJ=125°C, IO=1.8 A) | rDS(on) | 51 | 61 | mΩ | VI(IN) = 3.3 V, TJ = 125°C, IO = 1.8 A | 5 | |
| Static drain-source on-state resistance (VI(IN)=5 V, TJ=25°C, IO=0.18 A) | rDS(on) | 30 | 34 | mΩ | VI(IN) = 5 V, TJ = 25°C, IO = 0.18 A | 5 | |
| Static drain-source on-state resistance (VI(IN)=5 V, TJ=85°C, IO=0.18 A) | rDS(on) | 35 | 41 | mΩ | VI(IN) = 5 V, TJ = 85°C, IO = 0.18 A | 5 | |
| Static drain-source on-state resistance (VI(IN)=5 V, TJ=125°C, IO=0.18 A) | rDS(on) | 39 | 47 | mΩ | VI(IN) = 5 V, TJ = 125°C, IO = 0.18 A | 5 | |
| Static drain-source on-state resistance (VI(IN)=3.3 V, TJ=25°C, IO=0.18 A) | rDS(on) | 33 | 37 | mΩ | VI(IN) = 3.3 V, TJ = 25°C, IO = 0.18 A | 5 | |
| Static drain-source on-state resistance (VI(IN)=3.3 V, TJ=85°C, IO=0.18 A) | rDS(on) | 39 | 46 | mΩ | VI(IN) = 3.3 V, TJ = 85°C, IO = 0.18 A | 5 | |
| Static drain-source on-state resistance (VI(IN)=3.3 V, TJ=125°C, IO=0.18 A) | rDS(on) | 44 | 56 | mΩ | VI(IN) = 3.3 V, TJ = 125°C, IO = 0.18 A | 5 | |
| High-level input voltage (EN) | VIH | 2 | V | 2.7 V ≤ VI(IN) ≤ 5.5 V | 5 | ||
| Low-level input voltage (EN) | VIL | 0.8 | V | 4.5 V ≤ VI(IN) ≤ 5.5 V | 5 | ||
| Low-level input voltage (EN) | VIL | 0.5 | V | 2.7 V ≤ VI(IN) ≤ 4.5 V | 5 | ||
| Input current (EN) | II | -0.5 | 0.5 | μA | EN = 0 V or EN = VI(IN) | 5 | |
| Short-circuit output current (TPS2022) | IOS | 1.1 | 1.5 | 1.8 | A | TJ = 25°C, VI = 5.5 V, OUT connected to GND, Device enabled into short circuit | 5 |
| Supply current, low-level output | 0.3 | 1 | μA | TJ = 25°C, No load on OUT, EN = VI(IN) | 5 | ||
| Supply current, low-level output | 10 | μA | -40°C ≤ TJ ≤ 125°C, No load on OUT, EN = VI(IN) | 5 | |||
| Supply current, high-level output | 58 | 75 | μA | TJ = 25°C, No load on OUT, EN = 0 V | 5 | ||
| Supply current, high-level output | 100 | μA | -40°C ≤ TJ ≤ 125°C, No load on OUT, EN = 0 V | 5 | |||
| Leakage current | 10 | μA | EN = VI(IN), OUT connected to ground, -40°C ≤ TJ ≤ 125°C | 5 | |||
| Undervoltage lockout low-level input voltage | 2 | 2.5 | V | 5 | |||
| Overcurrent output low voltage | VOL(OC) | 0.4 | V | IO = 10 mA | 5 | ||
| Off-state current | 1 | μA | VO = 5 V, VO = 3.3 V | 5 | |||
| Input voltage range | VI(IN) | -0.3 | 6 | V | With respect to GND | 4 | |
| Output voltage range | VO(OUT) | -0.3 | V | With respect to GND; maximum printed as VI(IN) + 0.3 V | 4 | ||
| Enable input voltage range | VI(EN) | -0.3 | 6 | V | With respect to GND | 4 | |
| Operating virtual junction temperature range | TJ | -40 | 125 | °C | 4 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Lead temperature soldering | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 4 | |||
| Electrostatic discharge protection: Human body model | 2 | kV | 4 | ||||
| Electrostatic discharge protection: Machine model | 200 | V | 4 | ||||
| Electrostatic discharge protection: Charged device model (CDM) | 750 | V | 4 | ||||
| Input voltage | VI(IN) | 2.7 | 5.5 | V | 4 | ||
| Enable input voltage | VI(EN) | 0 | 5.5 | V | 4 | ||
| Continuous output current (TPS2022) | IO | 0 | 1 | A | TPS2022 | 4 | |
| Operating virtual junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Continuous total power dissipation (D package) | 725 | mW | TA ≤ 25°C | 4 | |||
| Continuous total power dissipation (D package) | 464 | mW | TA = 70°C | 4 | |||
| Continuous total power dissipation (D package) | 377 | mW | TA = 85°C | 4 | |||
| Thermal resistance, junction to ambient | RθJA | 172 | °C/W | SOIC package | 19 |
CAD (KiCad official)
- Symbol:
TPS2022DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tps2022dr-etched.step/tps2022dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps2022dr.step/tps2022dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
f42743bfcffed509, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).