Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TPS2000EDBVR

Texas Instruments · Power Distribution Switches · SOT-23-5

TPS2000EDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Power-switch output for 2A maximum continuous current; connect to load.
2 GND power_in Ground connection.
3 FLT tri_state Active-low open-drain output for overcurrent or overtemperature fault signal; sink current 0 to 10 mA.
4 EN/EN input Enable input with low polarity; logic high (≥1.8V) turns on switch, logic low (<0.8V) turns off; accepts 0 to 5.5V input.
5 IN power_in Input supply voltage (2.7V to 5.5V) and power-switch drain; connect 0.1µF or greater ceramic capacitor from IN to GND close to the IC.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: TPS2000EDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tps2000edbvr-etched.step / tps2000edbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps2000edbvr.step / tps2000edbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 96e797daf8040b4a, retrieved 2026-10-01, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF