main
Ray tps1hc100bqpwprq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 45dd10a
{
  "schema_version": 1,
  "type": "component",
  "slug": "tps1hc100bqpwprq1",
  "title": "TPS1HC100BQPWPRQ1",
  "brief": "Texas Instruments Power Distribution Switches, HTSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "tps1hc100bqpwprq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "TPS1HC100BQPWPRQ1",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-14",
    "pin_count": 15,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tps1hc100-q1",
    "parts": {
      "symbol": "tps1hc100bqpwprq1.kicad_sym",
      "footprint": "tps1hc100bqpwprq1.kicad_mod",
      "model_3d": "tps1hc100bqpwprq1-etched.glb",
      "model_3d_plain": "tps1hc100bqpwprq1.glb",
      "model_3d_step": "tps1hc100bqpwprq1-etched.step",
      "model_3d_step_plain": "tps1hc100bqpwprq1.step",
      "lbr": "tps1hc100bqpwprq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C3230071"
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Device power ground; connect to resistor-diode ground network for reverse battery protection."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Digital input control for channel activation; 1.5V logic high threshold with 200-350kΩ internal pulldown."
      },
      {
        "number": "3",
        "name": "DIAG_EN",
        "type": "input",
        "description": "Digital input to enable/disable diagnostics; 1.5V logic high threshold with 100-250kΩ internal pulldown."
      },
      {
        "number": "4",
        "name": "FAULT",
        "type": "tri_state",
        "description": "Open-drain global fault output; asserts low when overcurrent, thermal shutdown, or other faults detected."
      },
      {
        "number": "5",
        "name": "LATCH",
        "type": "input",
        "description": "Digital input to select thermal shutdown recovery mode (latch-off vs auto-retry); 1.5V logic high threshold with 0.5-1.5MΩ internal pulldown."
      },
      {
        "number": "6",
        "name": "SNS",
        "type": "output",
        "description": "Analog output proportional to load current with 1/1040 sense ratio; voltage range 0 to VSNSFH (3.15-5V dependent on DIAG_EN)."
      },
      {
        "number": "7",
        "name": "ILIM",
        "type": "output",
        "description": "Current limit setting pin; connect external resistor RILIM to ground to program current limit (0.69-6.15A) or leave floating for 3A default."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "9",
        "name": "VOUT",
        "type": "power_out",
        "description": "High-side switch output connected to load; maximum continuous current 2.5A at 85°C with 88mΩ on-resistance at 25°C (6V-28V supply)."
      },
      {
        "number": "10",
        "name": "VOUT",
        "type": "power_out",
        "description": "High-side switch output connected to load; maximum continuous current 2.5A at 85°C with 88mΩ on-resistance at 25°C (6V-28V supply)."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "12",
        "name": "VBB",
        "type": "power_in",
        "description": "Power supply input; nominal range 3.5-18V for automotive systems with extended range 2.6-28V; UVLO rising threshold 3.5V, falling 2.6V."
      },
      {
        "number": "13",
        "name": "VBB",
        "type": "power_in",
        "description": "Power supply input; nominal range 3.5-18V for automotive systems with extended range 2.6-28V; UVLO rising threshold 3.5V, falling 2.6V."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "15",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: ILIM pin type classified as output since the device sources current through this pin to measure exte",
          "exposed pad 15 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 57,
        "cost_usd": 0.4619,
        "at": "2026-09-23T17:36:55"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tps1hc100-q1",
        "pages": 57,
        "sha256": "451d911acc266bc8",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 15,
        "described": 15,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "tps1hc100bqpwprq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.35,
          5,
          1.05
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "e73930af88609deacee2bde98223bb9da2411f0cebb494015de765f0df216789",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "tps1hc100bqpwprq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.35,
          5,
          1.05
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f4cf7816721e83be5d43f25a30cee528afe2a71fa7870674d218588b63c57303",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "HTSSOP-14",
      "Category": "Power Management (PMIC)",
      "Pins": "15"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "tps1hc100bqpwprq1"
  ],
  "discovery_pitch": "TPS1HC100BQPWPRQ1 (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "tps1hc100bqpwprq1.kicad_sym",
    "tps1hc100bqpwprq1.kicad_mod",
    "tps1hc100bqpwprq1.glb",
    "tps1hc100bqpwprq1.step",
    "tps1hc100bqpwprq1.lbr",
    "docs/hero.png",
    "docs/tps1hc100bqpwprq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T11:46:50.510Z"
}