main
Ray Initial commit: component/tps1hc100bqpwprq1 c1a0cd3

TPS1HC100BQPWPRQ1

Texas Instruments · Power Distribution Switches · HTSSOP-14

TPS1HC100BQPWPRQ1 from Texas Instruments, in a HTSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Device power ground; connect to resistor-diode ground network for reverse battery protection.
2 EN input Digital input control for channel activation; 1.5V logic high threshold with 200-350kΩ internal pulldown.
3 DIAG_EN input Digital input to enable/disable diagnostics; 1.5V logic high threshold with 100-250kΩ internal pulldown.
4 FAULT tri_state Open-drain global fault output; asserts low when overcurrent, thermal shutdown, or other faults detected.
5 LATCH input Digital input to select thermal shutdown recovery mode (latch-off vs auto-retry); 1.5V logic high threshold with 0.5-1.5MΩ internal pulldown.
6 SNS output Analog output proportional to load current with 1/1040 sense ratio; voltage range 0 to VSNSFH (3.15-5V dependent on DIAG_EN).
7 ILIM output Current limit setting pin; connect external resistor RILIM to ground to program current limit (0.69-6.15A) or leave floating for 3A default.
8 NC unconnected No internal connection.
9 VOUT power_out High-side switch output connected to load; maximum continuous current 2.5A at 85°C with 88mΩ on-resistance at 25°C (6V-28V supply).
10 VOUT power_out High-side switch output connected to load; maximum continuous current 2.5A at 85°C with 88mΩ on-resistance at 25°C (6V-28V supply).
11 NC unconnected No internal connection.
12 VBB power_in Power supply input; nominal range 3.5-18V for automotive systems with extended range 2.6-28V; UVLO rising threshold 3.5V, falling 2.6V.
13 VBB power_in Power supply input; nominal range 3.5-18V for automotive systems with extended range 2.6-28V; UVLO rising threshold 3.5V, falling 2.6V.
14 NC unconnected No internal connection.
15 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-14
Category Power Management (PMIC)
Pins 15

CAD (KiCad official)

  • Symbol: TPS1HC100BQPWPRQ1
  • Footprint: Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: tps1hc100bqpwprq1-etched.step / tps1hc100bqpwprq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps1hc100bqpwprq1.step / tps1hc100bqpwprq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (57 pp, sha256 451d911acc266bc8, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF